Clemco Angle Nozzle CAM

SKU: 6038

HAN: 6038

Category: Tungsten carbide

Available

2699,45 kr

incl. 19% VAT , (Paket)

Type

Piece

This item has variations. Please select the requested variation.

A CAM angle nozzle is designed to blast blind surfaces such as mold cavities or behind beams. Tungsten Carbide lined, the nozzles are available in one or three outlets.

The operator inserts the included nozzle washer into a nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer.

With all related equipment correctly assembled and tested, the operator points the angle nozzle at the surface to be cleaned and presses the remote control handle to begin blasting. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.

The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

Advantages

Tungsten Carbide is the most rugged and durable liner materal and provides the best value.
Has a 45 degree outlet angle and is available in one or three outlets.
1-inch entry provides smooth transition

Stock No.	Model	Description
91991D	CAM 3 X 1	4,8 mm x 1 Orifice x 70 mm
91992D	CAM 3 X 2	4,8 mm x 2 Orifices x 70 mm
91993D	CAM 3 X 3	4,8 mm x 3 Orifices x 70 mm
99111D	CAM 4 X 1	6,5 mm x 1 Orifice x 70 mm
91994D	CAM 4 X 2	6,5 mm x 2 Orifices x 70 mm
99108D	CAM 4 X 3	6,5 mm x 3 Orifices x 70 mm
99100D	CAM 5 X 1	8 mm x 1 Orifice x 70 mm
91995D	CAM 5 X 2	8 mm x 2 Orifices x 70 mm
99109D	CAM 5 X 3	8 mm x 3 Orifices x 70 mm
99101D	CAM 6 X 1	9,5 mm x 1 Orifice x 70 mm
91996D	CAM 6 X 2	9,5 mm x 2 Orifices x 70 mm
99110D	CAM 6 X 3	9,5 mm x 3 Orifices x 70 mm

Connection Thread:	50 mm Coarse Thread
Material:	Tungsten Carbide
Outlet:	3 1 2
Exit Angle:	45°
Internal diameter (Nozzle):	6,5 mm 8 mm 9,5 mm 4,8 mm
Nozzle Length:	70 mm
Blast hose diameter:	19 mm; 25 mm; 32 mm