GEMÜ 567 BioStar control Aseptic control valve for low flow rates

Gemü 517

1.6 m³/h 60

8.0 m³/h 50

80 l/h 50

4.1 m³/h 33

400 l/h 31

2.6 m³/h 30

250 l/h 25

160 l/h 23

100 l/h 21

linear, linear 19

12.5 m³/h 18

14.0 m³/h 18

1.4435 (BN2), block material, Δ Fe < 0.5% 51

1.4529, block material 2

1.4539, block material 7

2.4602, Vollmaterial Alloy 22, (NiCr21Mo14W) 7

PTFE 443

11 mm 138

ATEX certification 15

Media wetted parts cleaned for high purity media and packed in plastic bag and surface 1536 1

Ra ≤ 0.25 μm (10 μin.) for media wetted surfaces *), to DIN 11866 H5, mechanically polished internal, *) for pipe inside-Ø < 6 mm, in the spigot Ra ≤ 0.38 µm 1

Ra ≤ 0.25 μm (10 μin.) for media wetted surfaces *), to DIN 11866 HE5, electropolished internal / external, *) for pipe inside-Ø < 6 mm, in the spigot Ra ≤ 0.38 µm 7

Ra ≤ 0.4 µm (15 µin.) for media wetted surfaces, to DIN 11866 H4, mechanically polished internal 311

Ra Max. 0.51 μm (20 μin.) for media wetted surfaces, according ASME BPE SF1, mechanically polished internal 20

Ra Max. 0.51 µm (20 µin.) for media wetted surfaces, to ASME BPE SF5, electropolished internal / external 18

Surface 1537, K-No 5759: Exhaust air duct with M5 connection! 1

2-way angle body 337

2-way angle body with bypass 55

24 V DC 26

3.0 m 9

34 mm 121

Ra ≤ 0.25 μm (10 μin.) for media wetted surfaces *), to DIN 11866 H5, mechanically polished internal, *) for pipe inside-Ø < 6 mm, in the spigot Ra ≤ 0.38 µm 1

Ra ≤ 0.25 μm (10 μin.) for media wetted surfaces *), to DIN 11866 HE5, electropolished internal / external, *) for pipe inside-Ø < 6 mm, in the spigot Ra ≤ 0.38 µm 7

Ra ≤ 0.8 µm (30 µin.) for media wetted surfaces, in accordance with DIN 11866 H3, mechanically polished internal 224

Ra max. 0,38 µm (15 µin.) für medienberührte Oberflächen, gemäß ASME BPE SF4, innen/außen elektropoliert 88

Ra Max. 0.38 µm (15 µin.) for media wetted surfaces, to ASME BPE SF4, electropolished internal / external 15

Ra Max. 0.51 μm (20 μin.) for media wetted surfaces, according ASME BPE SF1, mechanically polished internal 20

Ra Max. 0.51 µm (20 µin.) for media wetted surfaces, to ASME BPE SF5, electropolished internal / external 17

Actuator sealing PTFE / Seat sealing FFKM / Bypass sealing PTFE Bypass-Diaphgram Code 54 4

Actuator sealing PTFE / Seat sealing FKM 9

Actuator sealing PTFE / Seat sealing FKM / Bypass sealing PTFE Bypass-Diaphgram Code 54 41

Antriebsabdichtung PTFE/Sitzabdichtung PTFE, PTFE 123

in Ruhestellung geöffnet (NO) 11

Normally open (NO) 4

Operator seal PTFE / seat seal FPM 71

Operator seal PTFE / seat seal FPM PTFE/EPDM, Actuator sealing PTFE / Seat sealing FKM / Bypass sealing PTFE Bypass-Diaphgram Code 54 3

Operator seal PTFE / seat seal FPM, Operator seal PTFE / seat seal FPM 71

Actuator Size 2, Handwheel, plastic With seal adjuster and stroke limiter 4

Actuator Size 2, Handwheel, plastic Without seal adjuster and stroke limiter 1

Actuator Size 2, Handwheel, stainless steel, With seal adjuster and stroke limiter, locking device (both directions), mounting for proximity switches M 8x1 2

Actuator Size 2, Handwheel, stainless steel, Without seal adjuster and stroke limiter 6

Actuator Size 2, pneumatic 237

Actuator Size 3, Handwheel, plastic With seal adjuster and stroke limiter 2

Actuator Size 3, Handwheel, stainless steel, With seal adjuster and stroke limiter 2

Actuator Size 3, Handwheel, stainless steel, Without seal adjuster and stroke limiter 1

Actuator Size 3, pneumatic 60

Actuator Size 4, pneumatic 44

Actuator size 5T1 10

Operator size 2MH 20

Actuator Size 2, Handwheel, stainless steel, With seal adjuster and stroke limiter 35

Actuator Size 2, pneumatic 72

linear 66

modified equal-percentage 339

Actuator with M12x1 thread for accessories with standard spring set 46

Double acting (DA) 6

Manually operated, manually operated 42

Normally closed (NC), Normally closed (NC) 64

Operator size 1 19

Operator size 1T3 274