| General description | - The waterjet cutting
technology
is used for a very wide range of cutting applications. Therefore exist
a large variety of available waterjet cutting systems:
- 1D slitter systems for
cutting web material
- 2D cutting tables for
cutting sheet material (cutting head moves along the x-, y- and z-axis
(height adjustable))
- 3D robot applications
for complex three dimensional outlines
- Further customized
solutions
|
|---|
Description
High pressure pump
SL-VI 100 PLUS | - In
those areas where a very high pressure is not needed, the STREAMLINE
SL-VI can cut material at a pressure of up to 4136 bar. The pump units
are available in three different power rates (22, 37 and 74 kW).
- The new patented
curve-on-curve design of the intensifier results to a longer lifetime
of the cylinder body and the seal head connection.
- The optimized geometry
of the metal-on-metal seals facilitates the installation and leads to a
longer lifetime.
- The top cover is made of
transparent material. Therefore, a visual inspection of the
intensifier assembly is possible without the necessity to open the
cover. The EN ISO 13849-1 safety performance standard provides
increased operational safety.
|
|---|
Technical details
STREAMLINE
SL-VI 100 PLUS | - You
will find the most important technical data as follows:
| Physical quantity | Value |
|---|
Engine power
| 74 kW / 100 hp | | Pressure range | 500- 4136 bar | | Max. flow rate at max.
pressure | 7,1 l/ min | | Length | 2095 mm | | Width | 1320 mm | | Height | 1508 mm | | Weight | 2173 kg |
|
|---|
| Cutting water circuit | | Intensifier design | HSEC 23-C | | Intensifier system | Single | | Intensification ratio | 23: 1 | | Max. stroke rate | 75 1/min | | Attenuator volumen | 3 l | | Cutting water inlet
pressure | 2,4- 5,5 bar | | Min.
cutting water inlet flow | 30 l/ min | | Low pressure filter | 10 micrometer abs. |
|
|---|
| Maximal number of orifices at
maximal pressure | - The actual number of
orifices depends on quality and wear of the orifies and may deviate
from the given values minimally. ( 1) This orifice size is
used for pure water cutting only.)
| Nozzle diameter in
mm | number |
|---|
| 0,10 1) | 23 | | 0,12 1) | 14 | | 0,15 1) | 10 | | 0,17 | 7 | | 0,20 | 5 | | 0,25 | 3 | | 0,3 - 0,33 | 2 | | 0,35- 0,48 | 1 |
|
|---|
| Controls and electrics | | Control system | Eaton Smartwire | | User control display | 5,7 '' Color
Touchscreen | | Number of display
languages | 11 | | Motor start-up | Softstarter | | Nominal current at 400V/
50
Hz | 124 A | | Fuse size at 400V/ 50 Hz | For the necessary fuse
size please adhere to your local requirements |
|
|---|
| Pneumatic, Hydraulics and
cooling system | - Hydraulic tank capacity:
211 l
- Oil level and
temperature control (sensor)
- Oil/ water heat exchanger
- Oil/ air cooler
(optional)
|
|---|
| Standard features and options | - Redundant intensifier
(optional)
- High pressure transducer
(optional)
- Dual pressure setting
- Proportional control
(optional)
- Cutting water inlet
shut-off valve
- Safety dump valve
- Adjustable booster pump
- Oil drip pan
- Control cabinet
- Electrical control system
- Top cover
|
|---|
| Others | - Label according to
EC-machinery directive: CE mark
- Max. sound level: <84
dB(A)
|
|---|
| Shipping Conditions | - One high pressure pump
SL-VI 100 PLUS as described.
- A VAT
invoice is included in every sale (EU).
- Free
shipment to EU countries
- For
deliveries to non-EU countries, please
contact us and
send your
delivery address for exact shipping quotes. Before bidding
you must have a positive feedback and a confirmed address from us.
|
|---|
| Service | - We are an authorized
KMT dealer with twenty years of experience in blasting and
abrasive techniques.
- The offered
goods are all high-grade and new.
- For supplying our
customers with the correct spares as quickly as possible we hold a very
large warehouse stock with spares.
- If necessary we provide
on-site fitting of the system (in Germany).
- For
optimal performance of the system we can provide maintenance services
or we can teach you how to perform maintenance work independently.
- If you need further
information do not hesitate to contact us.
|
|---|
