High pressure pump SL-VI 60 PRO-III
Art.Nr.: 3436
Available now!
starting from 838022,51 ¥

including 19% VAT., plus shipping (Spedition)

cooling type
Piece
Produktdetails anzeigen

High pressure pump

SL-VI 60 PRO-III

for

waterjet cutting systems

KMT


General description
  • The waterjet cutting technology is used for a very wide range of cutting applications. Therefore exist a large variety of available waterjet cutting systems:
  • 1D slitter systems for cutting web material
  • 2D cutting tables for cutting sheet material (cutting head moves along the x-, y- and z-axis (height adjustable))
  • 3D robot applications for complex three dimensional outlines
  • Further customized solutions
    Description waterjet cutting systems at 6200 bar
    • Compared to conventional waterjet cutting at 4100 bar, the increased maximum pressure range features the following benefits:
    • Higher cutting speeds
    • Improved cutting edge quality
    • Lower abrasive consumption
    • Higher productivity
    • Optimized machine utilization
    • Improved conformality
    • Reduced delamination
      Description
      High pressure pump
      SL-VI PRO-III
      • With its PRO high pressure waterjet cutting technology, KMT Waterjet Systems sets new standards in the field of waterjet cutting with operating pressures up to 6200 bar.
      • The PRO series by KMT products were designed to ensure economical operation with enhanced service life and offer optimized high pressure equipment with highest requirements as regards reliability and cutting quality in heavy-duty continuous operation.
      • The high pressure pumps of the STREAMLINE PRO series have significantly enhanced the productivity and efficiency of the waterjet cutting technology.  The innovative high pressure pumps have been designed for both pure water and abrasive waterjet cutting at operating pressures of up to 6200 bar.
      • The STREAMLINE PRO-III line is available in two models with 45 kW and 93 kW. At a pressure of 6200 bar, the two versions offer volumetric flows of 2,8 l/ min and 5,8 l/ min respectively. This enables the operator to cut with either single or multiple heads.
        Technical details
        STREAMLINE
        SL-VI 60 PRO-III
        • You will find the most important technical data as follows:
          Physical quantity
          Value
          Engine power
          45 kW / 60 hp
          Pressure range
          800- 6200 bar
          Max. flow rate at max. pressure2,8 l/ min
          Length2095 mm
          Width
          1320 mm
          Height
          1973 mm
          Weight
          2130 kg
        Cutting water circuit
        Intensifier design
        PRO-III
        Intensifier system
        Single
        Intensification ratio
        38,5: 1
        Max. stroke rate
        54 1/min
        Attenuator volumen1,6 l
        Cutting water inlet pressure
        2,4- 5,5 bar
        Min. cutting water inlet flow12 l/ min
        Low pressure filter10 micrometer abs.
        Maximal number of orifices at maximal pressure
        • The actual number of orifices depends on quality and wear of the orifies and may deviate from the given values minimally. ( 1) This orifice size is used for pure water cutting only.)
          Nozzle diameter in mmnumber
          0,10 1)7
          0,12 1)4
          0,15 1)3
          0,17
          0,201
          0,251
        Controls and electrics
        Control system
        Eaton Smartwire
        User control display
        5,7 '' Color Touchscreen
        Number of display languages
        11
        Motor start-up
        Softstarter
        Nominal current at 400V/ 50 Hz80 A
        Fuse size at 400V/ 50 HzFor the necessary fuse size please adhere to your local requirements
        Pneumatic, Hydraulics and cooling system
        • Hydraulic tank capacity: 211 l
        • Oil level and temperature control (sensor)
        • Oil/ water heat exchanger
        • Oil/ air cooler (optional)
          Standard features and options
          • Redundant intensifier (optional)
          • High pressure transducer
          • Proportional control
          • Cutting water inlet shut-off valve
          • Safety dump valve
          • Adjustable booster pump
          • Oil drip pan
          • Control cabinet
          • Electrical control system
          • Top cover
          Others
          • Label according to EC-machinery directive: CE mark
          • Max. sound level: <84 dB(A)
            Shipping Conditions
            • One high pressure pump SL-VI 60 PRO-III as described.
            • A VAT invoice is included in every sale (EU).
            • Free shipment to EU countries
            • For deliveries to non-EU countries, please contact us and send your delivery address for exact shipping quotes. Before bidding you must have a positive feedback and a confirmed address from us.
            Service
            • We are an authorized KMT dealer with twenty years of experience in blasting and abrasive techniques.
            • The offered goods are all high-grade and new.
            • For supplying our customers with the correct spares as quickly as possible we hold a very large warehouse stock with spares.
            • If necessary we provide on-site fitting of the system (in Germany).
            • For optimal performance of the system we can provide maintenance services or we can teach you how to perform maintenance work independently.
            • If you need further information do not hesitate to contact us.

            Item number3436
            Manufacturer number
            Category Start
            Product weight: 1.973,00 Kg
            Dimensions ( length × width × height ): 209,50 × 132,00 × 150,80 cm

            Average product review

            Write your first review and help others with their purchase decision:

            Contact
            Questions?


            Please login first to add a tag.