Blast pot 1 is of doublechamber-type, designated for the operation with steelgrit angular. The dispensing valve and the silencer have to be overhauled. On the photo the blast pot, the silo and the bucket elevator.
Blast pot 2 with silo with the need to overhaul the dispensing valve and the outlet valve. In the background a CLEMCO low-pressure blast pot.
The CLEMCO low-pressure blast pot with pointed cone for fine abrasive medium. This blast pot is being used as alternative when special abrasive mediums are required.
The bucket elevator is used for 2 silos with different abrasive mediums.
The vibtrating sieve is rather ineffective with the abrasive medium that was used so far. When using mineral abrasive mediums separation by a cyclon is recommended.
Filter-system 1. The removal of dust is done by a srew conveyor.