Krautzberger KAA 1300 Airless automatic gun
HAN: KAA1300_BAS
Art.Nr.: 11209
Available now!
starting from 634,98 €

including 19% VAT., no shipping costs (Kleinpaket)

The automatic spray gun type KAA-1300 is used for the automatic (not manual) coating of surfaces such as metal, plastic, ceramics, wood and other suitable surfaces.
Body material
Control details
Needle sealing
Produktdetails anzeigen

The automatic spray gun KAA 1300 is designed for automatic (not manual) coating of surfaces such as metal, plastic, ceramics, wood and similar materials as well as other substrates. Typical coating materials include paints, dyes, water-soluble paints, adhesives, oils, release agents etc. The KAA 1300 gun can also be used to process abrasive coating materials at operating pressures below 5 MPa (50 bar). The spray gun works on the ?airless? principle ? in other words, the spray jet is generated solely by the material pressure that ejects the material through a nozzle. After exiting the nozzle, the spray jet takes on the shape dictated by the nozzle. The jet is directed at the workpiece, and the effective spray fan is not quite as wide as theoretically possible.

The particles of the spray jet reach far higher speeds than with spray guns driven by compressed air. Accordingly, the material throughput is higher and the jet more focused (in other words, the swirling zone is smaller). The size and shape of the jet can only be altered by changing the nozzle. The diameter of the nozzle bore determines the material flow volume, while the size and geometry of the always elliptically shaped nozzle opening determine the height and width of the jet (shape of an elliptical cone). A wide range of airless nozzles are available.

The nozzle can be rotated steplessly by 360° in the axis of the spray jet and arrested in any position. This permits optimum adjustment of the angle at which the jet hits the workpiece to the prevailing conditions.

Average product review

Write your first review and help others with their purchase decision:

Contact
Questions?


Please login first to add a tag.