Low-pressure atomizer stainless steel ZN-KOPF-ES

Low-pressure atomizer stainless steel ZN-KOPF-ES

SKU: 13425

HAN: ZQ-KOPF-ES

Category: Fluid Atomizer

Available
Delivery time: 1 - 5 Workdays Other countries

264,18 €

incl. 19% VAT , (Paket)

ZN-KOPF-ES: atomizer for thin liquids for fixed installation (without metal hose). For atomizing thin oils and liquids (max. viscosity 350 mm²/s) with a specific effective range.

Atomizer low pressure ZN-KOPF-ES

Atomizer for thin liquids for fixed installation (without metal hose). For atomizing thin oils and liquids (max. viscosity 350 mm2/s) with a targeted area of action.

Example

Oils are atomized in crafting. The more automatic it is, the less it can be forgotten. The atomizer responds from as little as 2 bar overpressure. Think of tools, molds for plastic, lubricants, Polishing, etc. The higher the pressure, the finer the spray mist and the smaller the spray angle.

Function

The liquid hose can be placed in an unpressurized container or connected.
The atomizer should always placed slightly above the max. liquid level in the container.
When there is compressed air, atomized immediately (a built-in non-return valve in the hose prevents it from sinking too quickly).
The atomizer can be controlled either permanently or intermittently by a control unit (e.g. automatic blow molding machine BA) - but always in well-dosed quantities.
In the center of the air jet, the liquid is supplied efficiently and cleanly.
The amount of air and liquid can be finely adjusted via the air and liquid throttle (see photo).
For containers, hoses and other accessories, see the Accessories section.

Specifications:

Material: stainless steel
Operating pressure: 3 - 6 bar
Ambient temperature: -25 °C ... +80 °C
Viscosity range: 1 - 300 mm2 /sec. at 20°C
Spray angle: max. 30°
Max. Air consumption at 6 bar: 54 l norm./min.
Sound level: 84 dB

Examples of measured values for suction volume in 1 min at 20 °C:

ISOVG150

2.1 ml at 5 bar compressed air
1.9 ml at 3 bar compressed air

Water

62 ml at 6 bar compressed air
48 ml at 5 bar compressed air
30 ml at 3 bar compressed air

Included:

Metal hose nickel-plated (only with version ZN)
Air throttle
Fluid restrictor
PVC hose 1 m
Connection for pneumatic hose 6 x 4
Sieve filter
Check valve

Atomizer low pressure ZN-HEAD

Atomizer for thin liquids for fixed installation (without metal hose). For atomizing thin oils and liquids (max. viscosity 350 mm2/s) with a targeted area of action.

Example

Function

The liquid hose can be placed in an unpressurized container or connected.
The atomizer should always placed slightly above the max. liquid level in the container.
When there is compressed air, atomized immediately (a built-in non-return valve in the hose prevents it from sinking too quickly).
The atomizer can be controlled either permanently or intermittently by a control unit (e.g. automatic blow molding machine BA) - but always in well-dosed quantities.
In the center of the air jet, the liquid is supplied efficiently and cleanly.
The amount of air and liquid can be finely adjusted via the air and liquid throttle (see photo).
For containers, hoses and other accessories, see the Accessories section.

Specifications:

Material: anodised aluminium, nickel-plated brass
Operating pressure: 3 - 6 bar
Ambient temperature: -25 °C ... +80 °C
Viscosity range: 1 - 300 mm2 /sec. at 20°C
Spray angle: max. 30°
Max. Air consumption at 6 bar: 54 l norm./min.
Sound level: 84 dB

Examples of measured values for suction volume in 1 min at 20 °C:

ISOVG150

2.1 ml at 5 bar compressed air
1.9 ml at 3 bar compressed air

Water

62 ml at 6 bar compressed air
48 ml at 5 bar compressed air
30 ml at 3 bar compressed air

Included:

Metal hose nickel-plated (only with version ZN)
Air throttle
Fluid restrictor
PVC hose 1 m
Connection for pneumatic hose 6 x 4
Sieve filter
Check valve

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question