Wagner Spraypack Cobra 40-10 AC

SKU: 5107

HAN: 322112

Category: Spraypacks

Available
Delivery time: 1 - 5 Workdays Other countries

60.519,26

incl. 19% VAT , (Paket)

The Spraypack is consists of the 1 Membrane pump Cobra 40-10 basic unit with 5 litre hopper including 1 Set AirCoat regulator IceBreaker, 1 AirCoat nozzle ACF 3000 11/40, 1 High-pressure double hose and1 AirCoat gun AC 4600 Professional, incl. red air cap and holder

Cobra® is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar.

Cobra® is the first high pressure pneumatic pump without packing.

The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials.

The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations.

Working principle

An IceBreaker® pneumatic motor pressurizes the hydraulic section with a ratio of 40:1.
The oil contained in it, transmits the pressure to the pumped fluid through the two diaphragms. While one diaphragm creates a suction, the other delivers the material.
Special inlet valves and the sturdy diaphragm construction allow high frequency operation. While this would be problematic for the fluid section of a standard piston or bellows pump, it is readily mastered by the Cobra® high speed.
A high delivery rate is therefore achievable with a very small pump volume.

Unique feature

FAST RETURN ON INVESTMENT: The reduced paint section displacement and low operative costs ensure enormous benefit in terms of savings: Reduced solvent consumption = up to 60 % savings during flushing procedures compared to piston pumps, Less paint waste, Easy and fast color change, lower maintenance due to extremely low wear
HIGH RELIABILITY: The long-life diaphragms and the absence of packings in the fluid section guarantee high reliability, even under the most taxing working conditions. The air-cooling system for the hydraulic stage keeps the hydraulic oil at a constant temperature and viscosity.

Application areas

Wood and furniture industry
Carpentry shops and joineries
Agriculture, construction and earth moving
General metal industry
Leather coating

Processable materials

Water and solvent-based paints
Wood coatings
Moisture-sensitive materials, isocyanates
Shear-sensitive coatings
UV-cure materials
Temperature reactive materials (acrylics, for example)
Zinc primers

Pump ratio:	40:1
Operating pressure:	25 MPa
Volumetric flow per double stroke:	10 cm3
Material outlet:	G 3/8"
Weight:	19 kg
max. delivery rate:	at 12 MPa 2.0 l/min

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question