| Item information | Value |
|---|---|
| Category: | Type 2300 Angle Seat Control Valve |
| Valve seat seal material: | stainless steel |
| Control function: | A - normally closed (NC) |
| Nominal pressure max: | 7 bar |
| Actuator size: | 90 mm |
| Port connection 1 type: | Weld end |
| Kv value (water): | 49 m3/h |
| Nominal diameter: | 50 mm |
| Actuator material: | PPS (Polyphenylene sulphide) |
| Control cone variant: | Equal percentage 50 : 1 |
| Item weight: | 4,84 kg |
Pneumatically operated 2-way angle seat control valve ELEMENT
In line with Buerkert’s philosophy for modular valves and sensors the construction of Type 2300 angle-seat valve fulfils tough criteria for process environments. Unrivalled cycle life and sealing integrity is guaranteed by the proven self adjusting packing gland. The parabolic trim results in a flow characteristic approximately 35% larger than conventional control valves. It is available in either stainless steel on stainless steel or with a durable PTFE seal for tight shut-off. The design enables the easy integration of automation modules whether they are digital electropneumatic positioner or process controller. The fully integrated system has a compact and smooth design, integrated pneumatic lines, IP65/67, NEMA Type 4X protection class and superior chemical resistance. This system has been engineered for reliable accurate control in applications where high flow rate is an advantage.
Technical data
Valve & function (13)
| Type | 2300 |
| Product sub-group | Process control valves |
| Actuator variant | ELEMENT |
| Main valve function principle | Angle seat valve |
| Valve piloting type | Pneumatic |
| Control function | A - normally closed (NC) |
| Manual override | No |
| Valve construction | Valve complete |
| Flow direction | Below seat |
| Control cone | Yes |
| Control cone variant | Equal percentage 50 : 1 |
| Position monitoring via magnetic piston | No |
| Position indicator | without |
Performance data (8)
| Nominal pressure min | 0 bar |
| Nominal pressure max | 7 bar |
| Kv value (water) | 49 m3/h |
| Nominal pressure (DIN EN 1333) | PN 25 |
| Nominal pressure (DIN EN 1759) | Class 150 |
| Seat diameter | 50 mm |
| Nominal diameter | 50 mm |
| Nominal diameter(IN) | 2 inch |
Actuator & operation (14)
| Pilot pressure min | 5,5 bar |
| Pilot pressure max | 7 bar |
| Pilot pressure vacuum | No |
| Actuator size | 90 mm |
| Actuator material category | Plastics |
| Actuator material | PPS (Polyphenylene sulphide) |
| Pilot air port material | Plastic |
| Pilot air port type | Interface ELEMENT |
| Pilot air port diameter (mm) | 6 mm |
| Pilot air port 1 pre-mounted | not equipped |
| Pilot air port 2 pre-mounted | not equipped |
| Pilot air port position | in line direction |
| Actuator increased chemical resistance | No |
| O-ring between cover and bush | No |
Valve body & materials (8)
| Valve seat seal material category | Metals |
| Valve seat seal material | stainless steel |
| Valve body material category | Metals |
| Valve body material | Stainless steel |
| Valve raw body manufacture | cast |
| Valve body surface treatment internal | unmachined |
| Valve body surface treatment external | unmachined |
| Seal nipple body material | Graphite |
Line connection (7)
| Fluidic port connection quantity | 2 |
| Port connection 1 type | Weld end |
| Port connection 1 pipe standard 1 | Customised pipe dimensions |
| Port connection 1 size DN | DN 50 |
| Port connection 1 inner diameter (mm) | 55,1 mm |
| Port connection 1 wall thickness (mm) | 2,6 mm |
| Port connection 1 outer diameter (mm) | 60,3 mm |
Temperature & cleaning (6)
| Environment temperature min | -10 °C |
| Environment temperature max | 100 °C |
| Medium temperature min | -10 °C |
| Medium temperature max | 185 °C |
| CIP capable | Yes |
| SIP capable | Yes |
Versions & options (5)
| Packaged seal enclosed | Yes |
| Oxygen variant | No |
| Vacuum variant | No |
| Additional manual override enclosed | No |
| Manufacturer’s test certificate 3.1 enclosed | No |
Approvals (2)
| Approval type | Material-approval-foods |
| Certification type | Food (EC) 1935/2004 and FDA compliant according Manufacturer Declaration |
Shipping & customs (4)
| Weight | 4,836 kg |
| Customs tariff number | 84818073 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- Excellent combination of good control characteristic and high flow rate
- Long service life
- Control units can be mounted directly without external tubing
- Stainless steel housing with thread, clamp and weld end connection
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
