| Item information | Value |
|---|---|
| Category: | Type 2836 Direct-acting 2-way proportional valve |
| Valve seat seal material: | FKM (fluororubber) |
| Operation: | direct-acting |
| Nominal pressure max: | 8 bar |
| Port connection 1 type: | Internal thread |
| Kv value (water): | 0,9 m3/h |
| Electrical connection type: | Plug pattern form A according to DIN EN 175301-803 |
| Main valve orifice size 1 (P) (mm): | 6 mm |
| Main valve media-contacting material: | Stainless steel |
| Voltage min / nominal voltage: | 24 V |
| Port connection 1 thread marking: | 1/2 |
| Degree of protection IP (max. with suitable connection): | IP65 |
| Nominal power: | 24 W |
| Item weight: | 4,40 kg |
Direct-acting 2-way proportional valve
The direct-acting proportional valve Type 2836 works as an electromagnetically actuated control valve in applications with relatively highflow rates. The valve is normally closed.
Technical data
Function (9)
| Type | 2836 |
| Valve function | A - normally closed - inlet port 1 (P/NC) |
| Fluidic port connection quantity | 2 |
| Valve function quantity switch positions | 2 |
| Operation | direct-acting |
| Main valve function principle | Globe valve |
| Switch function | proportional |
| Flow direction | Below seat |
| Installation position | any |
Orifice & flow (5)
| Main valve orifice size 1 (P) (mm) | 6 mm |
| Main valve orifice size 1 (inch) | 1/4 inch |
| Kv value (water) | 0,9 m3/h |
| QNn value (gas) | 970 l/min |
| Control range | 1:25 |
Pressure & temperature (7)
| Nominal pressure min | -1 bar |
| Nominal pressure max | 8 bar |
| Differential pressure max | 8 bar |
| Medium temperature min | -10 °C |
| Medium temperature max | 90 °C |
| Environment temperature min | -10 °C |
| Environment temperature max | 55 °C |
Line connection (6)
| Port connection 1 type | Internal thread |
| Port connection 1 thread type | G |
| Port connection 1 thread marking | 1/2 |
| Port connection 2 type | Internal thread |
| Port connection 2 thread type | G |
| Port connection 2 thread marking | 1/2 |
Materials (10)
| External sealing material | FKM (fluororubber) |
| Valve seat seal material category | Elastomers |
| Valve seat seal material | FKM (fluororubber) |
| Main valve media-contacting material | Stainless steel |
| Media-contacting part core material | Stainless steel |
| Media-contacting part stopper material | Stainless steel |
| Media-contacting part core guide tube material | Stainless steel |
| Media-contacting part core guide element 1 material | PTFE (Polytetrafluorethylene) |
| Media-contacting part core guide element 2 material | PEEK (Polyetheretherketone) |
| Media-contacting part spacer sleeve material | Stainless steel |
Actuator & coil (10)
| Actuator type | Plunger valve |
| Core guide | Sliding ring |
| Core guide 2 | Bush |
| Coil type | placed on top |
| Coil insulation material (encasement) | Epoxy |
| Coil size | 72 mm |
| Coil resistor | 13,5 Ohm |
| Thermal insulation class of the actuator | H |
| Nominal power | 24 W |
| Nominal operating mode / duty cycle | 100 % |
Electrical (14)
| Voltage min / nominal voltage | 24 V |
| Voltage max / nominal voltage | 24 V |
| AC voltage | No |
| DC voltage | Yes |
| Voltage tolerance positive | 10 % |
| Voltage tolerance negative | 10 % |
| Degree of protection IP (max. with suitable connection) | IP65 |
| Electrical connection type | Plug pattern form A according to DIN EN 175301-803 |
| Electrical connection number of contacts | 2 + Grounding conductor |
| Electrical connection design | male |
| Cable plug in scope of delivery | not included |
| Electrical connection position | in direction of flow left |
| PWM frequency min. | 150 Hz |
| PWM frequency max. | 180 Hz |
Versions (7)
| Vacuum variant | No |
| Analysis variant | No |
| Oxygen variant | No |
| Steam variant | No |
| Media separation | No |
| suitable for liquid media | Yes |
| suitable for gaseous media | Yes |
Shipping & customs (4)
| Weight | 4,400 kg |
| Customs tariff number | 84818079 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- For high flow rates
- Direct-acting, normally closed
- Operating pressure 0...25 bar
- Orifice sizes 3.0...12 mm
- Port connection 1⁄2” and 3⁄4”
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
