| Item information | Value |
|---|---|
| Category: | Type 2861 Direct-acting 2-way basic proportional valve |
| Valve seat seal material: | FKM (fluororubber) |
| Operation: | direct-acting |
| Nominal pressure max: | 6 bar |
| Port connection 1 type: | Flange |
| Kv value (water): | 0,055 m3/h |
| Electrical connection type: | Plug pattern form B according to industrial standard |
| Main valve orifice size 1 (P) (mm): | 1,6 mm |
| Main valve media-contacting material: | Brass |
| Voltage min / nominal voltage: | 12 V |
| Port connection 1 flange: | Bürkert flange 20 x 20 version A1 |
| Degree of protection IP (max. with suitable connection): | IP65 |
| Nominal power: | 5 W |
| Item weight: | 0,09 kg |
Direct-acting 2-way basic proportional valve
The extremely compact Type 2861 proportional valve is available up to an orifice size of 2 mm and is based on the higher-specification Type 2871 standard device. It is used as a proportional valve in closed-loop process control systems (pressure, flow rate, temperature, etc.). Compared with the standard device, the valve essentially has a simpler internal design, while assembly and testing have been optimised so that larger batch sizes for high-volume applications can be handled in a shorter time.
Technical data
Function (9)
| Type | 2861 |
| Valve function | A - normally closed - inlet port 1 (P/NC) |
| Fluidic port connection quantity | 2 |
| Valve function quantity switch positions | 2 |
| Operation | direct-acting |
| Main valve function principle | Globe valve |
| Switch function | proportional |
| Flow direction | Below seat |
| Installation position | any |
Orifice & flow (5)
| Main valve orifice size 1 (P) (mm) | 1,6 mm |
| Main valve orifice size 1 (inch) | 1/16 inch |
| Kv value (water) | 0,055 m3/h |
| QNn value (gas) | 59 l/min |
| Control range | 1:25 |
Pressure & temperature (7)
| Nominal pressure min | -1 bar |
| Nominal pressure max | 6 bar |
| Differential pressure max | 6 bar |
| Medium temperature min | -10 °C |
| Medium temperature max | 60 °C |
| Environment temperature min | -10 °C |
| Environment temperature max | 55 °C |
Line connection (6)
| Port connection 1 type | Flange |
| Port connection 1 flange | Bürkert flange 20 x 20 version A1 |
| Port connection 2 type | Flange |
| Port connection 2 flange | Bürkert flange 20 x 20 version A1 |
| Mounting (flange) type | Metric screws |
| Mounting (flange) material | Steel |
Materials (9)
| External sealing material | FKM (fluororubber) |
| Valve seat seal material category | Elastomers |
| Valve seat seal material | FKM (fluororubber) |
| Main valve media-contacting material | Brass |
| Media-contacting part core material | Stainless steel |
| Media-contacting part stopper material | Stainless steel |
| Media-contacting part core guide tube material | Stainless steel |
| Media-contacting part core guide element 1 material | Stainless steel |
| Media-contacting part core guide element 2 material | Stainless steel |
Actuator & coil (9)
| Actuator type | Plunger valve |
| Core guide | Sliding ring |
| Core guide 2 | Bush |
| Coil type | block bolted |
| Coil insulation material (encasement) | Epoxy |
| Coil size | 20 mm |
| Thermal insulation class of the actuator | H |
| Nominal power | 5 W |
| Nominal operating mode / duty cycle | 100 % |
Electrical (14)
| Voltage min / nominal voltage | 12 V |
| Voltage max / nominal voltage | 12 V |
| AC voltage | No |
| DC voltage | Yes |
| Voltage tolerance positive | 10 % |
| Voltage tolerance negative | 10 % |
| Degree of protection IP (max. with suitable connection) | IP65 |
| Electrical connection type | Plug pattern form B according to industrial standard |
| Electrical connection number of contacts | 2 + Grounding conductor |
| Electrical connection design | male |
| Cable plug in scope of delivery | not included |
| Electrical connection position | in direction of flow left |
| PWM frequency min. | 650 Hz |
| PWM frequency max. | 800 Hz |
Versions (8)
| Vacuum variant | No |
| Analysis variant | No |
| Oxygen variant | Yes |
| Steam variant | No |
| Media separation | No |
| Parts free of oil and grease | Yes (according to DIS 1000020797) |
| suitable for liquid media | Yes |
| suitable for gaseous media | Yes |
Shipping & customs (4)
| Weight | 0,086 kg |
| Customs tariff number | 84818079 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- High dynamic response
- Nominal diameter range DN 0.8 to DN 2.0 mm
- Good control range
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
