| Item information | Value |
|---|---|
| Category: | Type 6020 Direct-acting 2-way proportional valve |
| Valve seat seal material: | EPDM (ethylene-propylene diene rubber) |
| Operation: | direct-acting |
| Nominal pressure max: | 6 bar |
| Port connection 1 type: | Internal thread |
| Kv value (water): | 0,26 m3/h |
| Electrical connection type: | Plug KOSTAL MLK1.2 2-pin coding A |
| Main valve orifice size 1 (P) (mm): | 3 mm |
| Main valve media-contacting material: | Stainless steel |
| Voltage min / nominal voltage: | 24 V |
| Port connection 1 thread marking: | 3/8 |
| Degree of protection IP (max. with suitable connection): | IP6K9K |
| Nominal power: | 16 W |
| Item weight: | 0,00 kg |
Direct-acting 2-way proportional valve
The direct-acting proportional valve Type 6020 can be used as a control valve for closed-loop process control, typically for automatic setpoint control of flow or pressure values. Due to an elastomeric seat seal, the valve closes tight in the range of the nominal pressure related to the orifice size (integrated shut-off function). This valve is particularly suitable for use with gases such as hydrogen, oxygen or fuel gases. Compared to conventional proportional valves, the valve can be operated at higher supply pressures. For optimized use in fuel cell systems, cartridge and subbase (manifold) valve bodies as well as solenoids with automotive connector of protection class IP6K9K are available.
Technical data
Function (9)
| Type | 6020 |
| Valve function | A - normally closed - inlet port 1 (P/NC) |
| Fluidic port connection quantity | 2 |
| Valve function quantity switch positions | 2 |
| Operation | direct-acting |
| Main valve function principle | Globe valve |
| Switch function | proportional |
| Flow direction | Below seat |
| Installation position | any |
Orifice & flow (4)
| Main valve orifice size 1 (P) (mm) | 3 mm |
| Main valve orifice size 1 (inch) | 1/8 inch |
| Kv value (water) | 0,26 m3/h |
| QNn value (gas) | 280 l/min |
Pressure & temperature (7)
| Nominal pressure min | -1 bar |
| Nominal pressure max | 6 bar |
| Differential pressure max | 6 bar |
| Medium temperature min | -40 °C |
| Medium temperature max | 90 °C |
| Environment temperature min | -40 °C |
| Environment temperature max | 85 °C |
Line connection (6)
| Port connection 1 type | Internal thread |
| Port connection 1 thread type | G |
| Port connection 1 thread marking | 3/8 |
| Port connection 2 type | Internal thread |
| Port connection 2 thread type | G |
| Port connection 2 thread marking | 3/8 |
Materials (10)
| External sealing material | FKM & EPDM |
| Valve seat seal material category | Elastomers |
| Valve seat seal material | EPDM (Ethylene-propylene-diene rubber) |
| Main valve media-contacting material | Stainless steel |
| Media-contacting part press-fit seat material | Stainless steel |
| Media-contacting part core material | Stainless steel |
| Media-contacting part stopper material | Stainless steel |
| Media-contacting part core guide tube material | Stainless steel |
| Media-contacting part core guide element 1 material | PEEK (Polyetheretherketone) |
| Media-contacting part core guide element 2 material | PTFE (polytetrafluorethylene) |
Actuator & coil (9)
| Actuator type | Plunger valve |
| Core guide | Sliding ring |
| Core guide 2 | Bush |
| Coil type | placed on top |
| Coil insulation material (encasement) | Epoxy |
| Coil size | 43 mm |
| Thermal insulation class of the actuator | H |
| Nominal power | 16 W |
| Nominal operating mode / duty cycle | 100 % |
Electrical (14)
| Voltage min / nominal voltage | 24 V |
| Voltage max / nominal voltage | 24 V |
| AC voltage | No |
| DC voltage | Yes |
| Voltage tolerance positive | 10 % |
| Voltage tolerance negative | 10 % |
| Degree of protection IP (max. with suitable connection) | IP6K9K |
| Electrical connection type | Plug KOSTAL MLK1.2 2-pin coding A |
| Electrical connection number of contacts | 2 |
| Electrical connection design | male |
| Cable plug in scope of delivery | not included |
| Electrical connection position | in direction of flow left |
| PWM frequency min. | 300 Hz |
| PWM frequency max. | 400 Hz |
Versions (7)
| Vacuum variant | No |
| Analysis variant | No |
| Oxygen variant | No |
| Steam variant | No |
| Media separation | No |
| suitable for liquid media | Yes |
| suitable for gaseous media | Yes |
Shipping & customs (4)
| Weight | 0,001 kg |
| Customs tariff number | 84818079 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- Proportional valve for use in flow or pressure control loops
- Integrated shut-off function with reliably high tightness
- Excellent sensitivity and turn-down ratio
- Available as subbase or cartridge variant for simple system integration
- Protection class IP65 or IP6K9K with automotive connector
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
