| Item information | Value |
|---|---|
| Category: | Process valve automation |
| Function: | Positioner |
| Valve diameter: | 2,5 mm |
| Installation type: | ELEMENT - actuator |
| Position sensor type: | internal linear |
| Communication interface protocol: | PROFINET + Service-büS |
| Electrical connection type: | Plug-in connector |
| Displacement transducer signal: | digital 14-bit |
| QNn value (gas): | 130 l/min |
| Approval type: | UL |
| Pneumatic function: | single-acting |
| Control interface: | Keyboard and display internal |
| Item weight: | 0,78 kg |
Digital electropneumatic positioner for integrated mounting on process control valves
The compact positioner device Type 8692 is optimised for integrated mounting on the pneumatic actuators in the process valve series Type 23xx/2103 and is specially designed for the requirements of a hygienic process environment. The pilot air duct is integrated into the actuator without external piping. The easy operation and the selection of additional software functions are carried out either on a big graphic display with backlight and keypad or via the COMMUNICATOR. The positioner registers the valve position without deterioration via a contact-free, analogue position sensor. The integrated diagnostics functions are used to monitor control valve operating conditions. Valve diagnostic messages via status signals are issued in accordance with NE107 (NAMUR) and recorded as historical entries. The housing is easy to clean and features proven IP protection and chemically resistant materials for use in hygienic processing in the food, beverage and pharmaceutical industries. Combined with Buerkert ELEMENT actuators, the pneumatic actuating system enables spring chamber aeration that avoids actuator chamber contamination from the environment.
Technical data
Device & function (7)
| Type | 8692 |
| Product sub-group | Positioner / Process Controller |
| Function | Positioner |
| Manual override | Yes |
| Suitable for actuator sizes | 130 mm |
| Control interface | Keyboard and display internal |
| Installation type | ELEMENT drive |
Pneumatics & performance (5)
| Pneumatic function 1 double-acting | No |
| Pneumatic function 1 single-acting | Yes |
| Valve orifice size | 2,5 mm |
| QNn value (gas) | 130 l/min |
| Actuating system with booster function | No |
Position transmitter (2)
| Position sensor type | internal linear |
| Position sensor signal | digital 14-bit |
Pneumatic connections (3)
| Port connection 1 type | Internal thread |
| Port connection 1 thread type | G |
| Port connection 1 thread marking | 1/8 |
Electrical data (11)
| Electrical connection type | Plug-in connector |
| Electrical connection type | male |
| Electrical connection material | Stainless steel |
| Voltage min / nominal voltage | 24 V |
| Voltage max / nominal voltage | 24 V |
| Supply voltage system-internal | No |
| Supply voltage via BUS | No |
| Supply voltage via isolated barrier | No |
| Galvanically separated actuator supply | No |
| AC voltage | No |
| DC voltage | Yes |
Signals & communication (3)
| Input 1 type digital | serial (bus) |
| Output 1 type digital | Serial (bus) |
| Communication interface protocol | PROFINET + Service-büS |
Temperature & protection (3)
| Environment temperature min | -10 °C |
| Environment temperature max | 55 °C |
| Degree of protection IP (max. with suitable connection) | IP65/67 |
Approvals (2)
| Approval type | UL |
| Certification type | UL Listed cULus |
Shipping & customs (4)
| Weight | 0,780 kg |
| Customs tariff number | 90268020 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- Compact and robust stainless steel design
- Easy start-up with automatic X-Tune function
- Contact-free position sensor
- Integrated pilot air duct with spring chamber aeration
- EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1 or Buerkert system bus (büS)
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
