Product Description
Digital electropneumatic process controller for integrated mounting on process control valves
The compact process controller device Type 8693 is optimised for integrated mounting on the pneumatic actuators in the Type 23xx/2103 process valve series and is specially designed for the requirements of a hygienic process environment. The actual value of the process factor is directly supplied to the device as 4-20 mA, PT100 or a frequency signal. The process controller calculates the set-point for the subordinated positioner based on the variance comparison. Via the analogue feedback, all analogue values on the control levels can be transferred. The integrated diagnostic functions are used to monitor control valve operating conditions. Valve diagnostic messages via status signals are issued in accordance with NE107 (NAMUR) and recorded as historical entries. The parameterisation of process controller and positioner can be carried out automatically. The easy operation and the selection of additional software functions are carried out either via the large graphic display with backlight and keypad or via COMMUNICATOR. The positioner registers the valve position without deterioration via a contact-free, analogue position sensor. The actuation of single or double-acting actuators is carried out without internal air consumption. Communication interfaces such as PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP, büS (based on CANopen) and analogue as well as digital feedback are optionally available.
Technical data
Device & function (7)
| Type |
8693 |
| Product sub-group |
Positioner / Process Controller |
| Function |
Process controller |
| Manual override |
No |
| Suitable for actuator sizes |
80, 100 mm |
| Control interface |
Keyboard and display internal |
| Installation type |
CLASSIC drive |
Pneumatics & performance (5)
| Pneumatic function 1 double-acting |
No |
| Pneumatic function 1 single-acting |
Yes |
| Valve orifice size |
0,6 mm |
| QNn value (gas) |
7 l/min |
| Actuating system with booster function |
No |
Position transmitter (2)
| Position sensor type |
internal linear |
| Position sensor signal |
digital 14-bit |
Pneumatic connections (3)
| Port connection 1 type |
Internal thread |
| Port connection 1 thread type |
G |
| Port connection 1 thread marking |
1/8 |
Electrical data (11)
| Electrical connection type |
Plug-in connector |
| Electrical connection type |
male |
| Electrical connection material |
Stainless steel |
| Voltage min / nominal voltage |
24 V |
| Voltage max / nominal voltage |
24 V |
| Supply voltage system-internal |
No |
| Supply voltage via BUS |
No |
| Supply voltage via isolated barrier |
No |
| Galvanically separated actuator supply |
No |
| AC voltage |
No |
| DC voltage |
Yes |
Signals & communication (7)
| Input 1 type analogue voltage |
0-5/10 V |
| Input 1 type analogue current |
0/4-20 mA |
| Input 2 type digital transistor connection NPN |
No |
| Input 2 type digital transistor connection PNP |
Yes |
| Output 1 type analogue current |
0/4-20 mA |
| Output 1 type analogue voltage |
0-5/10 V |
| Communication interface protocol |
Service-büS |
Temperature & protection (3)
| Environment temperature min |
-10 °C |
| Environment temperature max |
55 °C |
| Degree of protection IP (max. with suitable connection) |
IP65/67 |
Approvals (2)
| Approval type |
UL |
| Certification type |
UL Listed cULus |
Shipping & customs (4)
| Weight |
0,440 kg |
| Customs tariff number |
90268020 |
| Country of origin |
Germany |
| Export |
Not subject to export licensing |
Product benefits
- Compact and robust stainless steel design
- Easy start-up via Tune function for position and process controller
- Contact-free position sensor
- Integrated pilot air duct with spring chamber aeration
- PROFIBUS DP-V1, EtherNet/IP, PROFINET, Modbus TCP or büS (Buerkert system bus)
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)