| Category: |
Type 2000 Angled-Seat Valve
|
| Seat seal material: |
PTFE (Polytetrafluorethylene) |
| Nominal pressure: |
0 bar-16 bar-PN 25-Class 150 |
| Line connection 1: |
Inner thread-3/4-G |
| Fluidic port connection number: |
2 |
| Valve function number of switching positions: |
2 |
| Main valve operating principle: |
Angle seat valve |
| Fluidic port connection number: |
2 |
| Valve function number of switching positions: |
2 |
| Control function: |
A - normally closed (NC) |
| Manual actuation: |
No |
| Additional manual actuation included: |
No |
| Port connection 1 type: |
Inner thread |
| CIP capable: |
Yes |
| Port connection 1 thread marking: |
3/4 |
| SIP capable: |
Yes |
| Port connection 1 thread type: |
G |
| Valve body material: |
Gun metal |
| Type: |
2000 |
| Valve body material category: |
Metals |
| Valve body surface treatment internal: |
unmachined |
| Valve body surface treatment external: |
untreated |
| Nominal pressure max: |
16 bar |
| Seat size: |
20 mm |
| Control pressure min: |
4 bar |
| Packed seal enclosed: |
No |
| Nominal pressure min: |
0 bar |
| Control pressure max: |
10 bar |
| Control pressure vacuum: |
No |
| Temperature medium min: |
-10 °C |
| Temperature medium max: |
185 °C |
| Nominal pressure (DIN EN 1333): |
PN 25 |
| Temperature environment min: |
-10 °C |
| Temperature environment max: |
30 °C |
| Seat seal material category: |
Plastics |
| Seat seal material: |
PTFE (Polytetrafluorethylene) |
| Seal nipple body material: |
Graphite |
| Kv value (water): |
7 m3/h |
| Actuator material: |
PA (Polyamide) |
| Interface to actuator: |
metric |
| Body nominal size: |
20 mm |
| Body nominal size (IN): |
3/4 inch |
| Flow: |
Above seat |
| Main valve operating principle: |
Angle seat valve |
| Valve construction: |
Valve complete |
| Valve piloting type: |
Pneumatic |
| Product sub-group: |
On/off valves |
| Actuator version: |
Classic |
| Position monitoring via magnetic piston: |
No |
| Vacuum version: |
No |
| Actuator size: |
40 mm |
| Oxygen version: |
No |
| Actuator material category: |
Plastics |
| O-ring between cover and bush: |
Yes |
| Actuator increased chemical resistance: |
No |
| Control cone: |
No |
| Installation length: |
75 mm |
| Control air connection type: |
Internal thread |
| Control air connection thread type: |
G |
| Control air connection diameter (inch): |
1/8 inch |
| Control air connection 1 pre-mounted: |
Plug |
| Control air connection 2 pre-mounted: |
Plug |
| Control air connection position: |
in line direction |
| Control air connection material: |
Brass |
| Control air hole diameter: |
1,2 mm |
| Manufacturer´s test certificate 3.1 included: |
No |
| Nominal Pressure (DIN EN 1759): |
Class 150 |
| Valve raw body manufacture: |
cast |
| Approval type: |
IECEx, ATEX |
| Certification type: |
Ex h IIC T4 Gb, II 2 D Ex h IIIC T135°C Db, Ex h IIIC T135°C Db, II 2 G Ex h IIC T4 Gb |
