| Item information | Value |
|---|---|
| Category: | Type 8793 Digital electropneumatic Process Controller SideCONTROL |
| Valve diameter: | 2,2 mm |
| Installation type: | Remote |
| Position sensor type: | Remote |
| Communication interface protocol: | büS |
| Electrical connection type: | Plug-in connector |
| Displacement transducer signal: | digital |
| QNn value (gas): | 100 l/min |
| Approval type: | CSA |
| Item weight: | 1,20 kg |
Digital electropneumatic Process Controller SideCONTROL
The Type 8793 digital process controller is designed with standardisation according to IEC 60534-6-1 or VDI/VDE 3845 (IEC 60534-6-2) for assembly to linear and rotary actuators. The variant with remote position sensor can also be used to control Buerkert process control valves. The process controller processes all standard current and voltage signals and can also be equipped with the fieldbus interface. The actual process value is supplied directly to the device as 4-20 mA, PT100 or as a frequency signal. The process controller calculates the position set-point for the subordinated positioner via variance comparison. The parameterisation of process and position controllers can be carried out automatically via the P.TUNE and X.TUNE function. Operation is simple via the graphical display with keypad or via Buerkert Communicator. The process controller is equipped with diagnostic functions to monitor the valve. The diagnostics can be used to monitor the operating conditions of the control valve which makes maintenance decisions predictable and optimises the availability of the plants as required. The pneumatic actuating system can be used equally for single-acting and double-acting actuators. It is characterised by a defined safety response in the event of the failure of the electrical or pneumatic auxiliary power and possesses an enormous air capacity range with pressure supply up to 7 bar.
Technical data
Device & function (6)
| Type | 8793 |
| Product sub-group | Positioner / Process Controller |
| Function | Process controller |
| Manual actuation | No |
| Control interface | Keyboard and display internal |
| Mounting type | Remote |
Pneumatics & performance (5)
| Pneumatic function 1 single acting | Yes |
| Pneumatic function 1 double acting | Yes |
| Valve diameter | 2,2 mm |
| QNn value (gas) | 100 l/min |
| Positioning system with booster function | No |
Position transmitter (2)
| Displacement transducer type | Remote |
| Displacement transducer signal | digital |
Actuator sizes (11)
| For Actuator size 40 mm | No |
| For Actuator size 50mm | No |
| For Actuator size 63mm | No |
| For Actuator size 70mm | No |
| For Actuator size 80mm | No |
| For Actuator size 90mm | No |
| For Actuator size 100mm | No |
| For Actuator size 125mm | Yes |
| For Actuator size 130mm | Yes |
| For Actuator size 175mm | Yes |
| For Actuator size 225mm | Yes |
Pneumatic connections (10)
| Port connection 1 type | Internal thread |
| Port connection 1 thread type | G |
| Port connection 1 thread marking | 1/4 |
| Port connection 2 type | Internal thread |
| Port connection 2 thread type | G |
| Port connection 2 thread marking | 1/4 |
| Port connection 3 type | Internal thread |
| Port connection 3 pre-mounted | Blind plug |
| Port connection 3 thread type | G |
| Port connection 3 thread marking | 1/4 |
Electrical data (10)
| Electrical connection sort | Plug-in connector |
| Electrical connection material | Stainless steel |
| Voltage min / rated voltage | 24 V |
| Voltage max / rated voltage | 24 V |
| Supply system-internal | No |
| Supply via BUS | No |
| Supply via separating barrier | No |
| Galvanically separated actuator supply | No |
| AC voltage | No |
| DC voltage | Yes |
Signals & communication (8)
| Communication interface protocol | büS |
| Input 1 type digital | serial (bus) |
| Input 2 type digital transistor connection NPN | No |
| Input 2 type digital transistor connection PNP | Yes |
| Output 2 digital transistor connection NPN | No |
| Output 2 digital transistor connection PNP | Yes |
| Output 3 digital transistor connection NPN | No |
| Output 3 digital transistor connection PNP | Yes |
Temperature & protection (3)
| Temperature environment min | -10 °C |
| Temperature environment max | 60 °C |
| Protection type IP (max. with suitable connector) | IP65/67 |
Approvals (2)
| Approval type | CSA |
| Certification type | Class 3221-82 Valves Actuators - USA, Class 3221-02 Valve Actuators - Canada |
Shipping & customs (4)
| Weight | 1,200 kg |
| Customs tariff number | 90328900 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- Compact and robust design
- Start-up via the X.TUNE and P.TUNE function of the positioner and process controller
- Integrated diagnostic functions for valve monitoring
- Dynamic actuating system with no air consumption in controlled state
- EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1 or Buerkert system bus (büS)
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
