DN 10

Gemü 101

1.4435 (BN2), block material, Δ Fe < 0.5% 1

1.4435 (BN2), forged body Δ Fe < 0.5 % 3

1.4435 (F316L), forged body 47

1.4539, block material 2

1.4539, forged body 1

PTFE 47

1.6 m³/h 5

160 l/h 1

250 l/h 3

80 l/h 1

100 l/h, 100 l/h 91

11 mm 10

2-way angle body 9

2-way angle body with bypass 1

T body 39

Tank bottom valve body 1

Zweiwege-Durchgangskörper 51

24 V DC 2

Actuator sealing PTFE / Seat sealing FKM 3

Antriebsabdichtung PTFE/Sitzabdichtung PTFE, PTFE 4

in Ruhestellung geöffnet (NO) 2

Actuator Size 2, Handwheel, stainless steel, Without seal adjuster and stroke limiter 1

Actuator Size 2, pneumatic 8

Actuator size 3 diaphragm size 50 with distance piece 7

Antriebsgröße 0 1

Control air connector in D-direction, flow direction (standard), piston diameter 32 mm (standard) 1

Operator size 0/N 11

Operator size 0TA 3

Operator size 1/N 12

Operator size 1T1 5

Operator version 1R1 2

With seal adjuster and stroke limiter 2

With seal adjuster, black handwheel 27

Spigot EN 10357 series A (formerly DIN 11850 series 2) 24

Spigot ASME BPE 19

Clamps ASME BPE Face to face ASME BPE 14

Spigot EN 10357 series B, formerly DIN 11850 series 1 9

Spigot ISO 1127 / EN 10357 series C / DIN 11866 series B 9

Clamp DIN 32676 series B, face-to-face dimension FTF EN 558 series 1 5

Clamps DIN 32676 series A Face to face EN 558, series 7 3

Clamps ASME BPE, FTF EN 558, series 14 2

Clamps DIN 32676 for pipe EN 10357 series A DN 10 and 15, clamp OD 25.0 mm length EN 558 series 7 2

Spigot BS 4825, part 1 2

Aseptic clamp, DIN 11864-BKS, series A, length, FTF EN 558, series 7, length only for body configuration D 1

Aseptic flange, DIN 11864-BF, series A 1

Clamp ASME BPE 2

Clamp DIN 32676 series A 1

Ra ≤ 0.4 µm (15 µin.) for media wetted surfaces, in accordance with DIN 11866 H4, mechanically polished internal 9

Spigot ISO 1127 / EN 10357 series C / DIN 11866 series B 2

Spigot SMS 3008 1

Spigots ASME BPE 23