Operator size J/N

Gemü 94

1.4408, investment casting 1

1.4408, PFA lined 4

1.4435 (BN2), block material, Δ Fe < 0.5% 2

1.4435 (BN2), forged body Δ Fe < 0.5 % 2

1.4435, investment casting 4

1.4529, block material 4

1.4529, UNS N08367, block material Alloy 4

1.4539, block material 1

AL-6XN, block material Alloy, without CE acc. to PED, AL-6XN is no material for pressure equipment in accordance with 2014/68/EU-PED 1

EN-GJS-400-18-LT (GGG-40.3), hard rubber lined 1

EN-GJS-400-18-LT (GGG-40.3), PP lined 2

PTFE 20

Ra ≤ 0.8 µm mechanically polished internal, blasted external, surface finish data refers to media wetted surfaces 20

Ra ≤ 0.4 µm (15 µin.) for media wetted surfaces, to DIN 11866 H4, mechanically polished internal 14

100 l/h, 100 l/h 13

Ra ≤ 0.8 µm (30 µin.) for media wetted surfaces, in accordance with DIN 11866 HE3, electropolished internal/external 8

Ra ≤ 0.6 μm (25 μin.) for media wetted surfaces, electropolished internal/external 7

Ra ≤ 0.6 µm (25 µin.) for media wetted surfaces, mechanically polished internal 6

Ra Max. 0.51 μm (20 μin.) for media wetted surfaces, according ASME BPE SF1, mechanically polished internal 5

ATEX certification 4

Ra ≤ 0.4 µm (15 µin.) for media wetted surfaces, in accordance with DIN 11866 H4, mechanically polished internal 2

Ra Max. 0.51 µm (20 µin.) for media wetted surfaces, to ASME BPE SF5, electropolished internal / external 2

Ra Max. 0.64 μm (25 μin.) for media wetted surfaces, to ASME BPE SF6, electropolished internal / external 2

Media wetted area cleaned to ensure suitability for paint applications, parts sealed in plastic bag 1

11 mm 7

34 mm 13

equal-percentage Kv value: 1.3 m³/h 19

Ra ≤ 0.6 μm (25 μin.) for media wetted surfaces, electropolished internal / external 7

Ra ≤ 0.6 µm (25 µin.) for media wetted surfaces, mechanically polished internal 6

Ra ≤ 0.8 µm (30 µin.) for media wetted surfaces, in accordance with DIN 11866 H3, mechanically polished internal 14

Ra ≤ 6.3 μm (250 μin.) for media wetted surfaces, blasted internal/external 3

Ra Max. 0.38 µm (15 µin.) for media wetted surfaces, to ASME BPE SF4, electropolished internal / external 4

Ra Max. 0.51 μm (20 μin.) for media wetted surfaces, according ASME BPE SF1, mechanically polished internal 5

Ra Max. 0.51 µm (20 µin.) for media wetted surfaces, to ASME BPE SF5, electropolished internal / external 2

Ra Max. 0.64 μm (25 μin.) for media wetted surfaces, to ASME BPE SF2, mechanically polished internal 1

Ra Max. 0.64 μm (25 μin.) for media wetted surfaces, to ASME BPE SF6, electropolished internal / external 2

Spigot ASME BPE 38

Clamps ASME BPE, FTF EN 558, series 14 11

Spigot EN 10357 series A (formerly DIN 11850 series 2) 7

Clamp DIN 32676 series B, face-to-face dimension FTF EN 558 series 1 3

Cone spigot and union nut DIN 11851 2

Flanges ANSI Class 125/150 RF 2

Spigot SMS 3008 2

Aseptic flange, DIN 11864-NF, series A, length, FTF EN 558, series 1, length only for body configuration D 1

Clamp ISO 2852 / SMS 3017 1

Clamps DIN 32676 series A Face to face EN 558, series 7 1

Flanges ANSI Class 150 RF, Face to face MSS SP-88 1

Flanges JIS 10K, Face to face EN 558, series 1, ISO 5752, basic series 1 1

Diaphragm valve, pneumatically operated, plastic actuator, stainless steel distance piece 94

DN 65 7

DN 65 21

EPDM 43

PTFE/EPDM two-piece 49

Integrated RFID chip for electronic identification and traceability 9

Operator size 1T3 66

Ra ≤ 0.8 µm (30 µin.) for media wetted surfaces, in accordance with DIN 11866 H3, mechanically polished internal 4