| Item information | Value |
|---|---|
| Category: | Capacitive level sensors with media contact |
| Connection: | Cable, 2.00 m, PTFE |
| Dimensions: | Ø 18 x 73 mm |
| Installation: | non-flush |
| Switching output: | PNP Normally closed (NC) |
| Switching frequency: | 2 Hz |
| Housing material: | PTFE |
| Material sensing surface: | PTFE |
| Operating voltage Ub: | 10...35 VDC |
| Ambient temperature: | -10...60 °C |
| Protection class: | IP66 |
| Approval/Conformity: | CE, UKCA, cULus, WEEE |
| Function: | Smart Level 15 |
| Additional features: | Electrically conductive media, Foam and residue compensation |
| Sensitivity: | media-dependent, adjustable |
| Series: | M18 |
Balluff BCS M18TTI2-POCFAG-AT02 – Capacitive level sensor of the M18 series. Need to detect and monitor fill levels in containers, pipes, or tanks either with or without contacting the media through non-metallic container walls? The Balluff order code is BCS008C.
Technical data
Technical data (35)
| Basic features | |
|---|---|
| Additional features | Electrically conductive media Foam and residue compensation |
| Approval/Conformity | CE, UKCA, cULus, WEEE |
| Basic standard | IEC 60947-5-2 |
| Scope of delivery | Nut (2x) |
| Sensitivity | media-dependent, adjustable |
| Series | M18 |
| Electrical connection | |
| Cable length L | 2 m |
| Conductor cross-section | 0.20 mm² |
| Number of conductors | 3 |
| Polarity reversal protected | yes |
| Protection against device mix-ups | yes |
| Short-circuit protection | yes |
| Electrical data | |
| Operating voltage Ub | 10...35 VDC |
| Rated insulation voltage Ui | 75 V DC |
| Rated operating current Ie | 300 mA |
| Ripple max. (% of Ue) | 10 % |
| Switching frequency | 2 Hz |
| Utilization category | DC -13 |
| Voltage drop static max. | 1.8 V |
| Environmental conditions | |
| Ambient temperature | -10...60 °C |
| IP rating | IP66, IP64 at cable exit |
| Functional safety | |
| MTTF (40 °C) | 239 a |
| Interface | |
| Switching output | PNP normally closed (NC) |
| Material | |
| Cover material | PTFE |
| Housing material | PTFE |
| Material jacket | PTFE |
| Material sensing surface | PTFE |
| Mechanical data | |
| Dimension | Ø 18 x 73 mm |
| Installation | non-flush |
| Size | M18x1 |
| Thread (A) | M18x1 |
| Tightening torque | 0.5 Nm |
| Order code | BCS008C |
| Type code | BCS M18TTI2-POCFAG-AT02 |
| Customs tariff number | 85365019 |
Documents
Delivery time and availability
We source Balluff sensors directly from the manufacturer. The delivery time shown in the shop is a guide value. For urgent orders please ask us for the actual delivery time in advance – we will also check whether express shipping is possible.
Your advantage when buying from us
- Genuine Balluff products with full manufacturer warranty
- Technical advice from automation specialists
- Sensors, cables and accessories from a single source
- A named contact instead of an anonymous ticket system
- Shipping from Germany, delivery worldwide
Balluff GmbH, Schurwaldstraße 9, 73765 Neuhausen a.d.F., Baden-Württemberg, Deutschland, [email protected], https://www.balluff.com
Manufacturer according to GPSR
Balluff GmbH, Schurwaldstraße9, 73765 Neuhausen a.d.F., Baden-Württemberg, Deutschland, [email protected], https://www.balluff.com
