| Item information | Value |
|---|---|
| Category: | Rugged and extreme environments |
Balluff BTL KKJJ00-0310-C05AE5C0-000S32 – Magnetostrictive position sensor of the BTL KK series. Rugged position sensors withstand high pressure, shock, vibration and moisture, for example in mobile hydraulics. The Balluff order code is BTL4E5T.
Technical data
Technical data (56)
| Basic features | |
|---|---|
| Approval/Conformity | CE, UKCA, WEEE |
| Magnets, number (factory setting) | 1 |
| Magnets, number max. | 1 |
| With float magnet | no |
| Electrical connection | |
| Connection | Connector, M16x0.75, 8-pin |
| Connection version | radial |
| Polarity reversal protected | Ub up to 30 V DC |
| Short-circuit protection | Signal output against GND and against 30 V DC |
| Electrical data | |
| Current consumption max. at 24 V DC | 110 mA |
| Error signal Ia falling | 1.8 mA |
| Error signal Ia rising | 1.8 mA |
| Galvanic isolation | no |
| Inrush current | ≤ 3 A/0.5 ms |
| Operating voltage Ub | 10...30 VDC |
| Output signal adjustable | with software tool |
| Overvoltage protection | Ub up to 36 V DC |
| Switch-on delay max. | 500 ms |
| Voltage-proof up to (GND to housing) | 500 V DC |
| Environmental conditions | |
| Ambient temperature | -40...85 °C |
| EN 55016-2-3, Radiation | For industrial and residential use |
| EN 60068-2-27, Continuous shock | 50 g, 2 ms |
| EN 60068-2-27, Shock | 100 g, 6 ms |
| EN 60068-2-6, Vibration | 12 g, 10…2000 Hz |
| EN 61000-4-2, ESD | Severity Level 3 |
| EN 61000-4-3, RFI | Severity Level 3 |
| EN 61000-4-4, Burst | Severity Level 3 |
| EN 61000-4-5, Surge | Severity Level 2 |
| EN 61000-4-6, High-frequency fields | Severity Level 3 |
| EN 61000-4-8 Magnetic fields | Severity Level 4 |
| IP rating | IP67, IP69K, with connector |
| Relative humidity | ≤ 90 %, non-condensing |
| Storage temperature | -40...100 °C |
| Temperature coefficient typ. | ≤ 30 ppm/K at 50% of nominal stroke 500mm |
| Functional safety | |
| MTTF (40 °C) | 95 a |
| IO-Link | |
| IO-Link Profil IDs | 0x0001 SSP0, 0x0031 BLOB FW-Update 0x4000 Identification and Diagnosis |
| Interface | |
| Analog output | Analog, current 4…20 mA Analog, current 20…4 mA |
| Material | |
| Housing material | 1.4305 stainless steel |
| Material flange | 1.4404 stainless steel, 1.4429 stainless steel, 1.4435 stainless steel, 1.4571 stainless steel |
| O-ring material | FKM |
| Plug material | 1.4404 stainless steel |
| Protection tube material | 1.4571 stainless steel |
| Mechanical data | |
| Housing diameter | 79 mm |
| Installation length from contact surface | 410 mm |
| Mounting part | Flange Ø18h6 plus holes |
| Null point | 40 mm |
| Pressure rating max. | 600 bar |
| Protection tube diameter | 10.2 mm |
| Tightening torque | 3.5 Nm |
| Range/Distance | |
| Measuring length | 310 mm |
| Non-linearity max. | ±60 µm |
| Repeat accuracy | ≤ ± 10 µm |
| Resolution | ≤ 351 nA min. 4 µm |
| Sampling frequency max. | 1000 Hz |
| Order code | BTL4E5T |
| Type code | BTL KKJJ00-0310-C05AE5C0-000S32 |
| Customs tariff number | 90318020 |
Documents
Delivery time and availability
We source Balluff sensors directly from the manufacturer. The delivery time shown in the shop is a guide value. For urgent orders please ask us for the actual delivery time in advance – we will also check whether express shipping is possible.
Your advantage when buying from us
- Genuine Balluff products with full manufacturer warranty
- Technical advice from automation specialists
- Sensors, cables and accessories from a single source
- A named contact instead of an anonymous ticket system
- Shipping from Germany, delivery worldwide
Balluff GmbH, Schurwaldstraße 9, 73765 Neuhausen a.d.F., Baden-Württemberg, Deutschland, [email protected], https://www.balluff.com
Manufacturer according to GPSR
Balluff GmbH, Schurwaldstraße9, 73765 Neuhausen a.d.F., Baden-Württemberg, Deutschland, [email protected], https://www.balluff.com
