VAX-50M.I.NVX Série AX (11702240)

Numéro d'article: BAU.11702240

HAN: 11702240

#global.han#: 11702240

catégorie: Caméras industrielles

Stock limité

4.432,75 €

inclus 19% TVA ,

Fabricants:

Baumer

Série AX

Sony IMX250
2448 x 2048 px, 2/3″ CMOS, 77 fps
6-Core NVIDIA Carmel ARM
384 Core NVIDIA Volta GPI
8 GB 128-bit LPDDR4x
Gigabit Ethernet, USB 3.0, RS232

Description
Évaluations
Question sur l'article

no description available

Caractéristiques techniques

Données processeur
Processor configuration	NVIDIA Jetson Xavier NX
GPU data	384 Core Volta GPU
CPU data	6-Core Carmel ARM
AI data	2 x NVDLA Engines
Memory RAM	8 GB LPDDR4x
Memory Flash	16 GB eMMC 5.1
information du capteur
Sensor	Sony IMX250 Gen2
Mono/Color	Mono
Sensor type	2/3″ CMOS
Shutter type	Global shutter
Résolution	2448 × 2048 px
Pixel size	3.45 × 3.45 µm
Exposure time	0,001 … 60000 ms

Dark noise	2,11 e-
Saturation capacity	9411 e-
Dynamic range	70,6 dB
Signal-to-noise ratio	39,7 dB
Quantum efficiency	65,2 % @ 535 nm
formats d'acquisition
Image formats, interface frame rate max.	Full Frame, 2448 × 2048 px, max. 73 fps Binning 2×2, 1224 × 1024 px, max. 77 fps Binning 2×1, 1224 × 2048 px, max. 77 fps Binning 1×2, 2448 × 1024 px, max. 77 fps
Image formats, aquisition frame rate max. (Burst Mode)	Full Frame, 2448 × 2048 px, max. 77 fps
Pixel formats	Mono8 Mono10 Mono12 Mono12 Packed

Analog controls	Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit)
Color models	Mono
caractéristiques de l'appareil
Auto Functions	Exposure Auto Gain Auto
Image Pre-processing	Image Flipping (X/Y) LUT / Gamma
Acquisition / Interface	Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer
Synchronisation	free running trigger
Trigger sources	Hardware Software ActionCommand
Trigger delay	0 … 2 sec, tracking and buffering of up to 256 trigger signals
Process Synchronization	Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) 4 power outputs with up to 120 W (max. 48 V / 2.5 A) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source
Additional Functions	User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data
Internal image buffer	445 MB 31 images (Trigger Mode) 1 image (Free Running Mode)
Interfaces et connecteurs
Data interface	GigE USB 3.0 RS232
Process interface	M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
Power supply	via M12/12 pins a-coded
Données mécaniques
Lens mount	C-mount
Width	70 mm
Height	70 mm
Profondeur	120 mm
Poids	≤ 650 g
Matériau	aluminum, hard-anodized
Données électriques
Puissance absorbée	Approx. 17.9 W @ 73 fps
Conditions ambiantes
Operating temperature	0 … +60 ° @ T = measurement point
Humidity	10 … 90 % (non-condensing)
Classe de protection	IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable)
E/S numériques
Lines	1 input line 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
Output line sources	Off Exposure Active Timer1 Readout Active User0 User1 User2 TriggerReady
Conformité
Conformity	RoHS EAC

Il n'y a pas d'avis.

Coordonnées

Prénom - Donnée facultative

Nom de famille - Donnée facultative

Entreprise - Donnée facultative

E-mail

Téléphone - Donnée facultative

Question sur l'article

Votre question

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide 28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com

Angaben zur Produktsicherheit

Herstellerinformationen:

Baumer GmbH
Pfingstweide 28
Hessen
Friedberg, Deutschland, 61169
[email protected]
https://www.baumer.com

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com