VCXU.2-51M Série CX (11707449)

Numéro d'article: BAU.11707449

HAN: 11707449

#global.han#: 11707449

catégorie: Caméras industrielles

Stock limité

1.543,29 €

inclus 19% TVA ,

Fabricants:

Baumer

Série CX

2448 x 2048 px
Sony IMX264
2/3″ CMOS
35 fps
USB 3.0

Description
Évaluations
Question sur l'article

no description available

Caractéristiques techniques

information du capteur
Sensor	Sony IMX264 Gen2
Mono/Color	Mono
Sensor type	2/3″ CMOS
Shutter type	Global shutter
Résolution	2448 × 2048 px
Pixel size	3.45 × 3.45 µm
Exposure time	0,001 … 60000 ms

Dark noise	2,07 e-
Saturation capacity	9342 e-
Dynamic range	70,7 dB
Signal-to-noise ratio	39,7 dB
Quantum efficiency	65,4 % @ 536 nm 64,6 % @ 533 nm
formats d'acquisition
Image formats, interface frame rate max.	Full Frame, 2448 × 2048 px, max. 35 fps Binning 2×2, 1224 × 1024 px, max. 35 fps Binning 2×1, 1224 × 2048 px, max. 35 fps Binning 1×2, 2448 × 1024 px, max. 35 fps
Image formats, aquisition frame rate max. (Burst Mode)	Full Frame, 2448 × 2048 px, max. 35 fps Full Frame, 2448 × 2048 px, max. 35 fps
Pixel formats	Mono8 Mono10 Mono12 Mono12 Packed

Analog controls	Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit)
Color models	Mono
caractéristiques de l'appareil
Basic Functions	Exposure Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image)
Auto Functions	Exposure Auto Gain Auto
Image Pre-processing	Image Flipping (X/Y) LUT / Gamma
Acquisition / Interface	Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer
Synchronisation	free running trigger
Trigger sources	Hardware Software
Trigger delay	0 … 2 s, tracking and buffering of up to 256 trigger signals
Process Synchronization	Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) Chunk data inside transferred image Encoder support via Counter End trigger source
Additional Functions	User Set Integrated temperature sensor Readable additional information (e.g. sensor information)
Calibration data	Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values) Customer data storage (128 bytes user defined)
Internal image buffer	445 MB 31 images (Trigger Mode) 1 image (Free Running Mode)
Interfaces et connecteurs
Data interface	USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B
Process interface	M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)
Power supply	via USB 3.0 interface
Données mécaniques
Lens mount	C-mount
Width	29 mm
Height	29 mm
Profondeur	38 mm
Poids	≤ 90 g
Matériau	zinc die casting, baked varnish
Données électriques
Puissance absorbée	Approx. 2.4 W @ 35 fps
Operating voltage	5 VDC (via USB3.0 interface)

Flash memory size	128 kB
Conditions ambiantes
Operating temperature	0 … +65 ° @ T = measurement point
Température en magasin	-20 … +70 °C
Humidity	10 … 90 % (non-condensing)
Classe de protection	IP 40 (with mounted lens and cable)
E/S numériques
Lines	1 input line 1 output line 2 general purpose lines
Conformité
Conformity	CE RoHS UL recognized

Il n'y a pas d'avis.

Coordonnées

Prénom - Donnée facultative

Nom de famille - Donnée facultative

Entreprise - Donnée facultative

E-mail

Téléphone - Donnée facultative

Question sur l'article

Votre question

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide 28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com

Angaben zur Produktsicherheit

Herstellerinformationen:

Baumer GmbH
Pfingstweide 28
Hessen
Friedberg, Deutschland, 61169
[email protected]
https://www.baumer.com

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com