VCXG.2-241C.I Série CX (11708122)

Numéro d'article: BAU.11708122

HAN: 11708122

#global.han#: 11708122

catégorie: Caméras industrielles

Stock limité

5.645,06 €

inclus 19% TVA ,

Fabricants:

Baumer

Série CX

5312 × 4592 px
Sony IMX540
1.2″ CMOS
5 fps
Gigabit Ethernet

Description
Évaluations
Question sur l'article

no description available

Caractéristiques techniques

information du capteur
Sensor	Sony IMX540 Gen4
Mono/Color	Color
Sensor type	1.2″ CMOS
Shutter type	Global shutter
Résolution	5312 × 4592 px
Pixel size	2.74 × 2.74 µm
Exposure time	0,001 … 60000 ms

Dark noise	2,15 e-
Saturation capacity	9580 e-
Dynamic range	70,6 dB
Signal-to-noise ratio	39,8 dB
Quantum efficiency	46,8 % @ 465 nm 54,1 % @ 535 nm 42,2 % @ 630 nm
formats d'acquisition
Image formats, interface frame rate max.	Full Frame, 5312 × 4592 px, max. 5 fps Binning 2×2, 2656 × 2296 px, max. 5 fps Binning 2×1, 2656 × 4592 px, max. 5 fps Binning 1×2, 5312 × 2296 px, max. 5 fps
Image formats, aquisition frame rate max. (Burst Mode)	Full Frame, 5312 × 4592 px, max. 5 fps
Pixel formats	BayerRG8 BayerRG10 BayerRG12 BayerRG12 Packed Mono8 Mono10 Mono12 Mono12 Packed RGB8 BGR8

Analog controls	Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit)
Color models	Mono Raw Bayer RGB BGR
Color processing	Integrated color processor for high quality color calculation
caractéristiques de l'appareil
Basic Functions	Exposure Gain / Color Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image)
Auto Functions	Exposure Auto Gain Auto White Balance Auto Color Transformation Auto
Image Pre-processing	Image Flipping (X/Y) Color Processing (RGB, BGR, Mono) Color Enhancement (with optimized ColorTransformationMatrix) LUT / Gamma
Acquisition / Interface	Burst Mode Adjustable Framerate Device Link Throughput Limit Internal Image Buffer
Synchronisation	free running trigger
Trigger sources	Hardware Software ActionCommand
Trigger delay	0 … 2 s, tracking and buffering of up to 256 trigger signals
Process Synchronization	Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) 4 power outputs with up to 120 W (max. 48 V / 2.5 A) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source
Additional Functions	User Set Integrated temperature sensor Readable additional information (e.g. sensor information)
Calibration data	Integrated color correction matrix (3000 K, 5000 K, 6500 K, 9500 K, and user defined) Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values) Customer data storage (128 bytes user defined)
Internal image buffer	140 MB 2 image (Trigger Mode) 1 image (Free Running Mode)
Interfaces et connecteurs
Data interface	Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type
Process interface	M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
Power supply	via M12/12 pins a-coded or Power over Ethernet (PoE)
Données mécaniques
Lens mount	C-mount
Width	40 mm
Height	40 mm
Profondeur	50,8 mm
Poids	≤ 137 g
Matériau	aluminum, hard-anodized
Données électriques
Plage de tension +Vs	12 … 24 V DC (external power supply) 36 … 57 V DC (Power over Ethernet)
Puissance absorbée	Approx. 3.6 W @ 12 VDC and 5 fps Approx. 4.5 @ 48 VDC (PoE) and 5 fps

Flash memory size	128 kB
Conditions ambiantes
Operating temperature	0 … +65 ° @ T = measurement point
Température en magasin	-20 … +70 °C
Humidity	10 … 90 % (non-condensing)
Classe de protection	IP 40 (with mounted lens and cable) IP 54 (with mounted lens and cable) IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable) IP 69K (with stainless steel housing accessory)
E/S numériques
Lines	4 input lines 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
Output line sources	Off Line 0-3 Exposure Active Timer1Active Readout Active UserOutput 1-4 TriggerReady
Conformité
Conformity	CE RoHS UL recognized

Il n'y a pas d'avis.

Coordonnées

Prénom - Donnée facultative

Nom de famille - Donnée facultative

Entreprise - Donnée facultative

E-mail

Téléphone - Donnée facultative

Question sur l'article

Votre question

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide 28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com

Angaben zur Produktsicherheit

Herstellerinformationen:

Baumer GmbH
Pfingstweide 28
Hessen
Friedberg, Deutschland, 61169
[email protected]
https://www.baumer.com

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com