VCXG.2-13M Série CX (11708146)

Numéro d'article: BAU.11708146

HAN: 11708146

#global.han#: 11708146

catégorie: Caméras industrielles

Stock limité

855,31 €

inclus 19% TVA ,

Fabricants:

Baumer

Série CX

1280 x 1024 px
onsemi PYTHON1300
1/2″ CMOS
94 fps
Gigabit Ethernet

Description
Évaluations
Question sur l'article

no description available

Caractéristiques techniques

information du capteur
Sensor	onsemi PYTHON1300
Mono/Color	Mono
Sensor type	1/2″ CMOS
Shutter type	Global shutter
Résolution	1280 × 1024 px
Pixel size	4.8 × 4.8 µm
Exposure time	0,02 … 1000 ms

Dark noise	19,6 e-
Saturation capacity	7248 e-
Dynamic range	51,1 dB
Signal-to-noise ratio	38,6 dB
Quantum efficiency	52,2 % @ 535 nm 54,4 % @ 533 nm
formats d'acquisition
Image formats, interface frame rate max.	Full Frame, 1280 × 1024 px, max. 94 fps Binning 2×2, 640 × 512 px, max. 148 fps Binning 2×1, 640 × 1024 px, max. 148 fps Binning 1×2, 1280 × 512 px, max. 148 fps
Image formats, aquisition frame rate max. (Burst Mode)	Full Frame, 1280 × 1024 px, max. 146 fps
Pixel formats	Mono8 Mono10

Analog controls	Gain (0 … 12 dB) Offset (0 … 63 LSB 10 Bit)
Color models	Mono
caractéristiques de l'appareil
Basic Functions	Exposure Gain Trigger / Exposure Active (Flash) Binning 2x2 Partial Scan Offset Free Running Mode (Live Image)
Auto Functions	Exposure Auto Gain Auto
Image Pre-processing	Image Flipping (X/Y) LUT / Gamma
Acquisition / Interface	Burst Mode Adjustable Framerate Device Link Throughput Limit Internal Image Buffer
Synchronisation	free running trigger
Trigger sources	Hardware Software ActionCommand
Trigger delay	0 … 2 s, tracking and buffering of up to 256 trigger signals
Process Synchronization	Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) Chunk data inside transferred image Encoder support via Counter End trigger source
Additional Functions	User Set Integrated temperature sensor Readable additional information (e.g. sensor information)
Calibration data	Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values) Customer data storage (128 bytes user defined)
Internal image buffer	60 MB 16 images (Trigger Mode) 1 image (Free Running Mode)
Interfaces et connecteurs
Data interface	Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer Rate 100 Mbits/sec, Connector: 8P8C Modular Jack (RJ45), screwable TYPE090 (according to GigE Vision Mechanical Supplement)
Process interface	M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)
Power supply	via M8/8 pins or Power over Ethernet (PoE)
Données mécaniques
Lens mount	C-mount
Width	29 mm
Height	29 mm
Profondeur	49 mm
Poids	≤ 120 g
Matériau	zinc die casting, baked varnish
Données électriques
Plage de tension +Vs	12 … 24 V DC (external power supply) 36 … 57 V DC (Power over Ethernet)
Puissance absorbée	Approx. 3.0 W @ 12 VDC and 94 fps Approx. 3.7 W @ 48 VDC (PoE) and 94 fps

Flash memory size	128 kB
Conditions ambiantes
Operating temperature	0 … +65 ° @ T = measurement point
Température en magasin	-20 … +70 °C
Humidity	10 … 90 % (non-condensing)
Classe de protection	IP 40 (with mounted lens and cable)
E/S numériques
Lines	1 input line 1 output line 2 general purpose lines
Conformité
Conformity	CE RoHS UL recognized

Il n'y a pas d'avis.

Coordonnées

Prénom - Donnée facultative

Nom de famille - Donnée facultative

Entreprise - Donnée facultative

E-mail

Téléphone - Donnée facultative

Question sur l'article

Votre question

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide 28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com

Angaben zur Produktsicherheit

Herstellerinformationen:

Baumer GmbH
Pfingstweide 28
Hessen
Friedberg, Deutschland, 61169
[email protected]
https://www.baumer.com

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com