UF200.P50-GP1J.72CU Sensores de proximidad por ultrasonidos (11708328)

UF200.P50-GP1J.72CU Sensores de proximidad por ultrasonidos (11708328)

Número de artículo: BAU.11708328

HAN: 11708328

#global.han#: 11708328

Categoría: Sensores de ultrasonidos con montaje frontal

existencias escasas en el almacén

245,50 €

incluido 19% IVA ,

Fabricante:

Baumer

Sensores de proximidad por ultrasonidos

Fastest limit value detection due to extremely short response times
Flexible parameterization and additional diagnostic data thanks to IO-Link
Shortest blind zone in its class
High performance in compact housing

Descripción
Valoraciones
Pregunta sobre el producto

no description available

Datos técnicos

Datos generales
Scanning range Sd	15 … 500 mm
Scanning range close limit Sdc	15 … 500 mm
Scanning range far limit Sde	15 … 500 mm
Version	IO-Link Multiplex version
Hysteresis typ.	4 % Sde
Repeat accuracy	0,5 mm
Temperature drift	< 2 % of distance to target Sde
Power-up drift	Compensated after 15 min.
Response time ton/toff min	< 16 ms
Response time ton/toff standard	< 40 ms
Sonic frequency	290 kHz
Adjustment	qTeach, line-Teach, IO-Link
Light indicator	LED yellow
Power on indication	LED green
Alignment measuring axis	< 2°
Datos eléctricos
Voltage supply range +Vs	12 … 30 VDC
Current consumption typ.	12 mA
Output circuit	Push-pull
Output current	<100 mA
Voltage drop Vd	<3 VDC
Residual ripple	< 10 % Vs
Short circuit protection	Yes
Reverse polarity protection	Yes, Vs to GND

Interface	IO-Link V1.1
Baud rate	38.4 kBaud (COM 2)
Cycle time	≥ 8 ms
Process data length	48 Bit
Process data structure	Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 2 = quality Bit 3 = alarm Bit 5 = SSC4 (counter) Bit 8-15 = scale factor Bit 16-47 = 32 Bit measurement
IO-Link port type	Class A
Additional data	Distance Excess gain Operating cycles Operating hours Boot cycles Voltage de trabajo Device temperature Histograms
Adjustable parameters	Switching point Switching hysteresis Measured value filtering Time filters LED status indicators Output logic Output circuit Counter Beam forming Analog output characteristic Deactivate the sensor element Find Me function
Datos mecánicos
Design	Rectangular
Housing material	Plastic (ASA, PMMA)
Width / diameter	20,5 mm
Height / length	41 mm
Depth	15 mm
Connection types	Cable 4 pin, 2 m
Condiciones ambientales
Operating temperature	-25 … +65 °C
Storage temperature	-25 … +75 °C
Protection class	IP 67

#productDetails.itemInformation#	#productDetails.itemValue#
Ejecución:	IO-Link Multiplex version
Precisión de repetición:	0,5 mm
Power on indication:	LED green
Light indicator:	LED yellow
Temperature drift:	< 2 % of distance to target Sde
Ajuste:	qTeach, line-Teach, IO-Link
Scanning range Sd:	15 … 500 mm
Scanning range close limit Sdc:	15 … 500 mm
Scanning range far limit Sde:	15 … 500 mm
Hysteresis typ.:	4 % Sde
Power-up drift:	Compensated after 15 min.
Response time ton/toff min:	< 16 ms
Response time ton/toff standard:	< 40 ms
Sonic frequency:	290 kHz
Alignment measuring axis:	< 2°