| Category: |
Type 8026 Flow Meter
|
| Sensor type: |
Paddle wheel |
| Detection of flow direction: |
No |
| Paddle wheel material: |
PVDF (Polyvinylidene fluoride) |
| Paddle wheel measuring principle detection: |
Hall |
| Paddle wheel type: |
Magnetic |
| sensor holder material composition: |
Plastics |
| Paddle wheel axle material: |
Ceramic |
| Sensor holder material: |
PVDF (Polyvinylidene fluoride) |
| Bearing material category: |
Technical ceramics |
| Insertion sensor length: |
short |
| Bearing material: |
Ceramic |
| Dynamic viscosity min.: |
0 cP |
| Dynamic viscosity max.: |
300 cP |
| Flow rate (volume): |
Yes |
| Type: |
8026 |
| Flow rate (mass): |
No |
| Temperature: |
No |
| Density: |
No |
| Concentration 1: |
No |
| Precision of volume flow rate in relation to reading: |
1 % |
| Electronics body material composition: |
1.4404 (316L) |
| Battery voltage: |
No |
| DC voltage min.: |
14 V |
| DC voltage max.: |
36 V |
| Nut material: |
PC (polycarbonate) |
| Screws material: |
Stainless steel |
| Attachment part material: |
PSU (polysulfone)/PPSU (polyphenylsulfone) |
| Cover material: |
PPS (polyphenylene sulphide) |
| Protective cover material: |
PC (polycarbonate) |
| Temperature medium min: |
-15 °C |
| Electronics body material category: |
Metals |
| Temperature medium max: |
100 °C |
| Electronics body material: |
Stainless steel |
| Nominal pressure (DIN EN 1333): |
PN 10 |
| Temperature environment min: |
-10 °C |
| Temperature environment max: |
60 °C |
| Sensor/housing seal material: |
EPDM (ethylene propylene diene rubber) food quality |
| Seal housing/cover material: |
EPDM (Ethylene-propylene-diene rubber) |
| Protective cover seal material: |
EPDM (ethylene propylene diene rubber) food quality |
| Medium-contacting parts seal material: |
FKM (Fluor rubber) |
| Time dosing: |
No |
| Batch dosing: |
No |
| Extended diagnosis: |
No |
| Continuous measurement: |
Yes |
| Volumeter: |
Yes |
| Dosing: |
No |
| Switch: |
No |
| Parametrisation local: |
Yes |
| Parametrisation separate: |
No |
| Parametrisation fixed: |
No |
| Product sub-group: |
Flow rate |
| Construction device: |
Compact |
| Fitting electronic interface: |
Insertion 2 (inch) |
| Electrical connection 1 type: |
Plug - M12 |
| Electrical connection 1 quantity: |
1 PCE |
| Electrical connection 1 number of contacts: |
5 PCE |
| Electrical connection seal 1 material: |
NBR (nitrile rubber) |
| Output 2 digital transistor connection NPN: |
Yes |
| Output 2 digital transistor connection PNP: |
Yes |
| Operating supply type: |
2 conductor |
| Digital output 2 transistor contactless: |
0,7 A |
| Output type analog quantity: |
1 |
| Output 1 type analog current: |
4-20 mA |
| Output analogue current functioning principle source: |
Yes |
| Output analogue current functioning principle drain: |
Yes |
| Electrical connection plate material: |
Stainless steel |
| Output 1 digital type: |
Transistor |
| Tropical climate version: |
Yes |
| Digital output 1 transistor contactless: |
0,7 A |
| Output 1 digital transistor connection NPN: |
Yes |
| Output 1 digital transistor connection PNP: |
Yes |
| Display type: |
no display |
| Protection class measurement device (IP): |
IP65/67 |
| Output type analog sinus: |
No |
| Output type current modulated according to NAMUR: |
No |
| Protection rate measurement device NEMA: |
NEMA 4X |
| Electrical connection 1 gender: |
male |
| Electrical connection 1 material category: |
Light metals |
| Electrical connection 1 material: |
Diecast zinc, nickel-plated |
| Output 2 digital type: |
Transistor |
