| Category: |
Type 8045 Flow Meter
|
| Rated voltage: |
18,0 V - 36 V |
| Temperature range: |
-15,00 °C - 110,00 °C |
| Measurement: |
Flow rate |
| Sensor type: |
Magnetic inductive |
| Output 1 digital type: |
Transistor |
| Gasket sensor/housing: |
FKM (fluororubber) |
| Sensor fitting material: |
Stainless steel |
| Sensor type: |
Magnetic inductive |
| Magnetic inductive type: |
Insertion |
| Detection of flow direction: |
Yes |
| Electrode material: |
Stainless steel |
| sensor holder material composition: |
Metals |
| Sensor holder material: |
Stainless steel |
| Insertion sensor length: |
short |
| Dynamic viscosity min.: |
0 cP |
| Dynamic viscosity max.: |
2.000 cP |
| Flow rate (volume): |
Yes |
| Type: |
8045 |
| Flow rate (mass): |
No |
| Temperature: |
No |
| Density: |
No |
| Concentration 1: |
No |
| Precision of volume flow rate in relation to reading: |
0,5 % |
| Conductivity min: |
20 µS/cm |
| Battery voltage: |
No |
| DC voltage min.: |
18 V |
| DC voltage max.: |
36 V |
| Nut material: |
PPA |
| Screws material: |
Stainless steel |
| Attachment part material: |
PSU (polysulfone)/PPSU (polyphenylsulfone) |
| Cover material: |
PPA |
| Protective cover material: |
PSU (polysulfone)/PPSU (polyphenylsulfone) |
| Temperature medium min: |
-15 °C |
| Electronics body material category: |
Plastics |
| Temperature medium max: |
110 °C |
| Electronics body material: |
PPA |
| Nominal pressure (DIN EN 1333): |
PN 16 |
| Temperature environment min: |
-10 °C |
| Temperature environment max: |
60 °C |
| Sensor/housing seal material: |
FKM (fluororubber) |
| Seal housing/cover material: |
NBR |
| Protective cover seal material: |
Silicone |
| Time dosing: |
No |
| Batch dosing: |
No |
| Extended diagnosis: |
No |
| Continuous measurement: |
Yes |
| Volumeter: |
Yes |
| Dosing: |
No |
| Switch: |
No |
| Parametrisation local: |
Yes |
| Parametrisation separate: |
No |
| Parametrisation fixed: |
No |
| Product sub-group: |
Flow rate |
| Construction device: |
Compact |
| Fitting electronic interface: |
Insertion clamp 1 1/2 (inch) |
| Electrical connection 1 type: |
Cable gland M20 |
| Electrical connection 1 quantity: |
2 PCE |
| Electrical connection seal 1 material: |
Neoprene |
| Operating supply type: |
3 conductor |
| Output type analog quantity: |
1 |
| Output 1 type analog current: |
4-20 mA |
| Output analogue current functioning principle source: |
Yes |
| Output analogue current functioning principle drain: |
Yes |
| Output 1 digital type: |
Transistor |
| Digital output 1 transistor contactless: |
0,1 A |
| Output 1 digital transistor connection NPN: |
Yes |
| Output 1 digital transistor connection PNP: |
Yes |
| Display type: |
Display |
| Protection class measurement device (IP): |
IP65 |
| Front foil material category: |
Plastics |
| Front foil material: |
Polyester |
| Electrode holder material: |
PEEK (polyetheretherketone) |
| Electrical connection 1 gender: |
Terminal block |
| Electrical connection 1 material category: |
Plastics |
| Electrical connection 1 material: |
PA (Polyamide) |
| Input type digital quantity: |
1 PCE |
| Output 2 digital type: |
Relay |
| Output 2 digital version NC: |
No |
| Output 2 digital version NO: |
Yes |
| Output 2 digital relay/reed voltage AC: |
250 V |
| Output 2 digital relay/reed voltage DC: |
40 V |
| Output 2 digital relay/reed power AC: |
3 A |
| Output 2 digital relay/reed current DC: |
3 A |
| Output 3 digital type: |
Relay |
| Output 3 digital version NC: |
No |
| Output 3 digital version NO: |
Yes |
| Output 3 digital relay/reed voltage AC: |
250 V |
| Output 3 digital relay/reed voltage DC: |
40 V |
| Output 3 digital relays/reed current AC: |
3 A |
