| Item information | Value |
|---|---|
| GTIN: | 4030661191027 |
| Category: | AZ 17 |
| Connection type: | Pre-wired cable |
| Number of safety contacts: | 2 |
| Latching force: | 5 N |
| Certificates: | cULus / IFA / CCC |
| Cable entry: | front |
| Material of the contacts, electrical: | Silver |
| Height of sensor: | 65 mm |
| Length of cable: | 5 m |
| Item weight: | 0,60 kg |
The Schmersal AZ 17-02ZK-2243 5,0M is a Safety switch with separate actuator of the AZ 17 series for movable guards on machinery and plant. It keeps the guard door locked until the hazardous condition has ended and signals position and interlocking to the safety controller. The manufacturer's article number is 101160652, the EAN 4030661191027.
Field of application
Suitable for removable guard, hinged safety guard, sliding safety guard.
Scope of delivery
Slot cover for dust-proof covering of the opening not in use / Actuator must be ordered separately.
Important note
Individual coding available on request
Technical data
Safety-related characteristic data (12)
| Standards | EN IEC 60947-5-1 |
| Performance Level, up to (single channel) | c |
| Category (single channel) | 1 |
| Precondition for the fault exclusion | Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Performance Level, up to (with fault exclusion) | d |
| Category (with fault exclusion) | 3 |
| Precondition for category 3 | for 2-channel use and with suitable logic unit. |
| B<sub>10D</sub> Normally-closed contact (NC) | 2,000,000 Operations |
| Note on the NC contact | Electrical life on request. |
| Mission time | 20 Year(s) |
| Coding level according to EN ISO 14119 | Low |
| Mission time | 20 Year(s) |
Actuation and switching function (7)
| Latching force | 5 N |
| Number of actuating directions | 2 |
| Actuating speed, maximum | 2 m/s |
| Positive break travel | 11 mm |
| Positive break force, minimum | 34 N |
| Positive break force per NC contact, minimum | 17 N |
| Mechanical lifetime, minimum | 1,000,000 Operations |
Contacts and connection (10)
| Switching element | 2 NC contact |
| Number of safety contacts | 2 |
| Switching principle | slow action, positive break NC contact |
| Material of the contacts, electrical | Silver |
| Cable entry | front |
| Length of cable | 5 m |
| Note (Switching element) | galvanically separated contact bridges |
| Number of cable glands | 1 |
| Number of cable wires | 4 |
| Termination | Pre-wired cable |
Electrical data (11)
| Rated insulation voltage U<sub>i</sub> | 250 VAC |
| Rated impulse withstand voltage U<sub>imp</sub> | 4 kV |
| Thermal test current | 10 A |
| Required rated short-circuit current | 1,000 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 4 A |
| Voltage, Utilisation category AC-15 | 230 VAC |
| Current, Utilisation category AC-15 | 4 A |
| Maximum switching frequency | 2,000 /h |
| Degree of pollution | 3 |
| Overvoltage category | III |
Design, material, environment (13)
| Working principle | mechanical |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Length of sensor | 30 mm |
| Width of sensor | 30 mm |
| Height of sensor | 65 mm |
| Gross weight | 600 g |
| Mounting | Screws |
| Type of the fixing screws | 2x M4 |
| IP Degree of protection | IP67 |
| Ambient temperature | -30 ... +80 °C |
| Storage and transport temperature | -40 ... +85 °C |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Wire cross-section | 0.75 mm² |
Standards and approvals (4)
| Standards | EN IEC 60947-5-1 / EN ISO 13849-1 / EN ISO 14119 |
| Certificates | cULus / IFA / CCC |
| eCl@ss number, version 12.0 | 27-27-26-02 |
| ETIM number, version 7.0 | EC002592 |
Delivery time and availability
Many items of this series are available from stock; special versions are built to order by the manufacturer and take correspondingly longer. The delivery time shown in the shop applies to stocked goods and is a guide value. For urgent orders please ask us for the actual delivery time in advance – we will also check whether express shipping is possible.
Your advantage when buying from us
- Authorised Schmersal dealer — genuine products with full manufacturer warranty
- Technical advice from specialists in machine safety
- All safety-related characteristic data documented for your risk assessment
- Matching actuators and accessories from a single source
- A named contact instead of an anonymous ticket system
- Shipping from Germany, delivery throughout Europe
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal, Nordrhein-Westfalen, Deutschland, [email protected], https://www.schmersal.com
Manufacturer according to GPSR
K.A. Schmersal GmbH & Co. KG, Möddinghofe30, 42279 Wuppertal, Nordrhein-Westfalen, Deutschland, [email protected], https://www.schmersal.com
