Product Description
Schmersal AZM190-02/02RK-MPVD-24VDC-2860 – Solenoid interlock of the AZM190 series. It keeps the movable guard locked until the hazardous condition has ended and signals position and locking status to the safety controller. The manufacturer's article number is 133033895, the EAN 8905236106224.
Field of application
Suitable for removable guard, hinged safety guard, sliding safety guard.
Scope of delivery
Actuator must be ordered separately.
Technical data
Safety-related characteristic data (16)
| Standards |
EN ISO 13849-1 |
| Performance Level, up to (single channel) |
c |
| Category (single channel) |
1 |
| Precondition for the fault exclusion |
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Performance Level, up to (with fault exclusion) |
d |
| Category (with fault exclusion) |
3 |
| Precondition for category 3 |
for 2-channel use and with suitable logic unit. |
| Performance Level, up to |
e |
| Note on the guard locking function |
Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions. |
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
| Note on the NC contact |
Electrical life on request. |
| B10D Normally-open contact (NO) |
1,000,000 Operations |
| Note on the NO contact |
at 10% Ie and ohmic load |
| Mission time |
20 Year(s) |
| Coding level according to EN ISO 14119 |
Low |
| Mission time |
20 Year(s) |
Interlocking and actuation (9)
| Holding force FZh in accordance with EN ISO 14119 |
1,950 N |
| Holding force Fmax, maximum |
2,550 N |
| Latching force |
20 N |
| Manual release |
Yes |
| Note (Manual release) |
front / For maintenance, installation, etc. |
| Number of actuating directions |
4 |
| Actuating speed, maximum |
0.3 m/s |
| Positive break force, minimum |
20 N |
| Mechanical lifetime, minimum |
1,000,000 Operations |
Contacts and connection (11)
| Switching element |
Magnet: 2 NC contacts / Actuator: 2 NC contacts |
| Number of safety contacts |
4 |
| Switching principle |
slow action, positive break NC contact |
| Material of the contacts, electrical |
Silver |
| Cable entry |
2 x M20 x 1,5 |
| Cable section, minimum |
0.5 mm² |
| Cable section, maximum |
1.5 mm² |
| Note |
All indications including the conductor ferrules. |
| Tightening torque of electrical connection, minimum |
0.5 Nm |
| Tightening torque of electrical connection, maximum |
0.6 Nm |
| Termination |
Screw terminals |
Electrical data (19)
| Rated control voltage |
24 VDC |
| Electrical power consumption, maximum |
8.5 W |
| Magnet switch-on time |
100 % |
| Rated insulation voltage Ui
|
250 VAC |
| Rated impulse withstand voltage Uimp
|
4 kV |
| Thermal test current |
4 A |
| Required rated short-circuit current |
1,000 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
4 A |
| Voltage, Utilisation category AC-15 |
230 VAC |
| Current, Utilisation category AC-15 |
4 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
4 A |
| Maximum switching frequency |
1,200 /h |
| Test pulse duration, maximum |
5 ms |
| Test pulse interval, minimum |
50 ms |
| Protection class |
II |
| Current, Utilisation category AC-15 |
4 A |
| Voltage, Utilisation category AC-15 |
230 VAC |
Design, material, environment (11)
| Working principle |
electromechanical |
| Housing material |
Glass-fibre, reinforced thermoplastic |
| Length of sensor |
41 mm |
| Width of sensor |
52 mm |
| Height of sensor |
178 mm |
| Gross weight |
480 g |
| Mounting |
Screws |
| Type of the fixing screws |
2x M5 |
| IP Degree of protection |
IP67 / IP65 |
| Ambient temperature |
-25 ... +55 °C |
| Note (Relative humidity) |
non-condensing / non-icing |
Standards and approvals (4)
| Standards |
EN IEC 60947-5-1 / EN ISO 13849-1 / BG-GS-ET-19 / EN ISO 14119 |
| Certificates |
cULus / CCC |
| eCl@ss number, version 12.0 |
27-27-26-03 |
| ETIM number, version 7.0 |
EC002593 |
Weitere Angaben (2)
| Predecessor part number |
103033895 |
| Number of cable glands |
2 |
Delivery time and availability
Many items of this series are available from stock; special versions are built to order by the manufacturer and take correspondingly longer. The delivery time shown in the shop applies to stocked goods and is a guide value. For urgent orders please ask us for the actual delivery time in advance – we will also check whether express shipping is possible.
Your advantage when buying from us
- Authorised Schmersal dealer — genuine products with full manufacturer warranty
- Technical advice from specialists in machine safety
- All safety-related characteristic data documented for your risk assessment
- Matching actuators and accessories from a single source
- A named contact instead of an anonymous ticket system
- Shipping from Germany, delivery throughout Europe
