| Item information | Value |
|---|---|
| GTIN: | 4030661442303 |
| Category: | PS116 |
| Version: | PS116-Z11-LR200-J200 |
| Connection type: | Pre-wired cable / Cable, 4-pole |
| Switching element: | 1 NO contact, 1 NC contacts |
| Switching principle: | Snap action |
| Material of the contacts, electrical: | Silver |
| Length of cable: | 2 m |
| Actuating element: | Rod lever J200 |
| Length of the lever: | 200 mm |
| Item weight: | 0,24 kg |
The Schmersal PS116-Z11-LR200-J200 is a Position switch of the PS116 series for movable guards on machinery and plant. It keeps the guard door locked until the hazardous condition has ended and signals position and interlocking to the safety controller. The manufacturer's article number is 103006581, the EAN 4030661442303.
Technical data
Actuation and switching function (6)
| Actuating speed, maximum | 1 m/s |
| Mechanical lifetime, minimum | 10,000,000 Operations |
| Actuating element | Rod lever J200 |
| Actuating speed, minimum | 10 mm/min |
| Actuating torque, minimum | 0.2 Nm |
| Positive break torque | 0.6 Nm |
Contacts and connection (10)
| Switching element | 1 NO contact, 1 NC contacts |
| Switching principle | Snap action |
| Material of the contacts, electrical | Silver |
| Terminal (mechanical) | right |
| Length of cable | 2 m |
| Cable type | LiYY |
| Number of normally closed (NC) | 1 |
| Number of normally open (NO) | 1 |
| Number of cable wires | 4 |
| Termination | Pre-wired cable / Cable, 4-pole |
Electrical data (12)
| Rated insulation voltage U<sub>i</sub> | 300 V |
| Rated impulse withstand voltage U<sub>imp</sub> | 4 kV |
| Required rated short-circuit current | 400 A |
| Maximum switching frequency | 5,000 /h |
| Protection class | II |
| Utilisation category AC-15 | 1.5 A |
| Utilisation category DC-13 | 1.5 A |
| Degree of pollution | 3 |
| Bounce duration, maximum | 3 ms |
| Switchover time, maximum | 5.5 ms |
| Utilisation category AC-15 | 240 VAC |
| Utilisation category DC-13 | 24 VDC |
Design, material, environment (12)
| Housing material | Plastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated |
| Length of sensor | 16.6 mm |
| Width of sensor | 31 mm |
| Gross weight | 240 g |
| IP Degree of protection | IP66 / IP67 |
| Ambient temperature | -30 ... +80 °C |
| Housing construction form | Norm construction design |
| Wire cross-section | 0.5 mm² |
| Diameter of the Rod | 6 mm |
| Length of the lever | 200 mm |
| Active area | Metal film |
| Length x Width x Height | Height of sensor: 169 mm (rod centre) |
Standards and approvals (4)
| Standards | EN IEC 60947-5-1 |
| Certificates | cULus / CCC |
| eCl@ss number, version 12.0 | 27-27-06-01 |
| ETIM number, version 7.0 | EC000030 |
Delivery time and availability
Many items of this series are available from stock; special versions are built to order by the manufacturer and take correspondingly longer. The delivery time shown in the shop applies to stocked goods and is a guide value. For urgent orders please ask us for the actual delivery time in advance – we will also check whether express shipping is possible.
Your advantage when buying from us
- Authorised Schmersal dealer — genuine products with full manufacturer warranty
- Technical advice from specialists in machine safety
- All safety-related characteristic data documented for your risk assessment
- Matching actuators and accessories from a single source
- A named contact instead of an anonymous ticket system
- Shipping from Germany, delivery throughout Europe
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal, Nordrhein-Westfalen, Deutschland, [email protected], https://www.schmersal.com
Manufacturer according to GPSR
K.A. Schmersal GmbH & Co. KG, Möddinghofe30, 42279 Wuppertal, Nordrhein-Westfalen, Deutschland, [email protected], https://www.schmersal.com
