| Item information | Value |
|---|---|
| Category: | Type 6014 Plunger Valve |
| Valve seat seal material: | FKM (fluororubber) |
| Valve function: | C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) |
| Port connection 1 type: | Internal thread |
| Kv value (water): | 0,11 m3/h |
| Electrical connection type: | Plug pattern form A according to DIN EN 175301-803 |
| Main valve orifice size 1 (P) (mm): | 2 mm |
| Main valve media-contacting material: | Stainless steel |
| Voltage min / nominal voltage: | 24 V |
| Port connection 1 thread marking: | 1/4 |
| Item weight: | 0,42 kg |
3/2-way plunger valve, direct-acting
Valve Type 6014 is a direct-acting plunger valve. The stopper and the core guide tube are welded together to increase pressure resistance and leak-tightness. A variety of seal material combinations are available to suit different applications. A Buerkert-specific flange variant (SFB) permits the space-saving arrangement of valves on a multiple manifold. A solenoid with Kick and Drop electronics is available in order to reduce electrical power consumption during operation.
Technical data
Valve & function (12)
| Type | 6014 |
| Operation | direct-acting |
| Actuator type | Plunger valve |
| Main valve function principle | Globe valve |
| Switch function | on/off |
| Media separation | No |
| Valve function | C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) |
| Fluidic port connection quantity | 3 |
| Valve function quantity switch positions | 2 |
| Main valve orifice size 1 (P) (mm) | 2 mm |
| Main valve orifice size 1 (inch) | 5/64 inch |
| Valve construction | Valve complete |
Materials & surfaces (5)
| Main valve media-contacting material | Stainless steel |
| Valve seat seal material category | Elastomers |
| Valve seat seal material | FKM (Fluor rubber) |
| External sealing material | FKM (Fluor rubber) |
| Parts free of oil and grease | Yes (according to DIS 1000020797) |
Line connection (9)
| Port connection 1 type | Internal thread |
| Port connection 1 thread type | G |
| Port connection 1 thread marking | 1/4 |
| Port connection 2 type | Internal thread |
| Port connection 2 thread type | G |
| Port connection 2 thread marking | 1/4 |
| Port connection 3 type | External thread |
| Port connection 3 thread type | G |
| Port connection 3 thread marking | 1/8 |
Flow & pressure (5)
| Nominal pressure min | 0 bar |
| Nominal pressure max (gas) | 10 bar |
| Nominal pressure max (liquid) | 10 bar |
| Kv value (water) | 0,11 m3/h |
| QNn value (gas) | 120 l/min |
Actuator (8)
| Manual override | No |
| Thermal insulation class of the actuator | B |
| Switching time open min. | 10 ms |
| Switching time open max. | 15 ms |
| Switching time close min. | 15 ms |
| Switching time close max. | 20 ms |
| Valve setting opening time | No |
| Valve setting closing time | No |
Coil (10)
| Rated power DC | 9 W |
| Reduced power DC | 9 W |
| Nominal power | 8 W |
| Coil type | placed on top |
| Coil insulation material (encasement) | PA (Polyamide) |
| Coil size | 32 mm |
| Coil wiring overvoltage protection | without |
| Coil wiring rectifier | No |
| Coil wiring polarity recovery diode | No |
| Nominal operating mode / duty cycle | 100 % |
Electrical & signals (11)
| Voltage min / nominal voltage | 24 V |
| Voltage max / nominal voltage | 24 V |
| Voltage tolerance negative | 10 % |
| Voltage tolerance positive | 10 % |
| AC voltage | No |
| DC voltage | Yes |
| Battery voltage | No |
| Electrical connection type | Plug pattern form A according to DIN EN 175301-803 |
| Electrical connection number of contacts | 2 + Grounding conductor |
| Electrical connection position | in direction of flow left |
| Degree of protection IP (max. with suitable connection) | IP65 |
Temperature (4)
| Environment temperature min | -10 °C |
| Environment temperature max | 55 °C |
| Medium temperature min | -10 °C |
| Medium temperature max | 100 °C |
Versions & options (8)
| Back-pressure-resistant variant | No |
| Vacuum variant | No |
| Analysis variant | No |
| Oxygen variant | Yes |
| Oil burner valve | No |
| Steam variant | No |
| Low-noise variant | No |
| Main valve with integrated screen | No |
Shipping & customs (4)
| Weight | 0,420 kg |
| Customs tariff number | 84818079 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- Direct-acting and compact valve up to DN 2.5
- Vibration-proof, bolted coil system
- Banjo fitting for direct mounting on pneumatic valves
- Explosion-protected variants
- Energy-saving “Kick and Drop” variants available
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected]
