Skip to main content Skip to search Skip to navigation

Solenoid valves 3/2 ways

A 3/2-way solenoid valve has three ports and two switching positions. It does not just shut off, it switches over: one inlet is routed to either of two outlets, two inlets are combined into one outlet, or a working port is vented. One valve therefore often replaces two shut-off valves including piping. The other valve groups can be found under Valves.

Plunger valves: direct-acting from 0 bar

Direct-acting plunger valves need no minimum pressure and typically pilot small pneumatic actuators or vent lines. The plunger valve Type 0355 covers nominal sizes from 1 to 5 mm with Kv values from 0.03 to 0.58 m³/h, for media temperatures from −40 °C to +180 °C. Type 6012 can be mounted in rows on multiple manifolds using the Buerkert flange version, or fitted directly to the actuator with a banjo connection. Type 7012 adds explosion-proof versions to the series.

Pivoted armature valves with isolating diaphragm for aggressive media

In a pivoted armature valve, a diaphragm keeps the coil system away from the flow, so even acids and alkalis can be switched. The pivoted armature valve Type 0121 is available with a body made of stainless steel, PTFE or PVC. Type 0331 ranges from brass to PEEK and polypropylene. Both offer manual override, power reduction or an impulse version as well as position feedback as a binary or NAMUR signal.

Servo-assisted piston valve for pressure and vacuum

The piston valve Type 6430 is servo-assisted, with a media-separated pivoted armature valve Type 0331 as the pilot. Versions are available for neutral liquids and gases from 1 to 16 bar, for technical vacuum and with auxiliary pilot air. As an impulse version it retains its switching state even in the event of a power failure.

Rocker valves for analytics and dosing

In analysers, 3/2-way valves switch between sample and flushing medium or add a reagent. The rocker valve Type 0127 is virtually free of dead space and easy to flush. Type 6628, 22 mm wide, achieves full back-pressure tightness, which is important when different pressures are present at the outlets.

How to choose the right valve

The valve function comes first: diverting or mixing, and whether the outlet should be open or closed in the de-energised position. Next, nominal size and Kv value determine the flow rate, while medium and temperature define the body and seal materials. If a line only needs to be opened and closed, Solenoid valves 2/2 ways are sufficient.

Your advantage when buying from us

  • Complete 3/2-way series in our range – plunger, pivoted armature, rocker and piston from a single source.
  • Technical advice on valve function, de-energised position and material before you order.
  • Delivery worldwide, purchase on account for business customers after review.
  • Net prices for trade, public bodies and research institutions.
  • Reordering by Buerkert part number, even years after the first purchase.
  • A named contact person instead of an anonymous ticket system, reachable by phone and e-mail.
Type 0121 Flap-Anchor Valve 3/2
Type 0121 Flap-Anchor Valve 3/2
Type 0121 Flap-Anchor Valve 3/2
Type 0127 Rocker Valve 3/2
Type 0127 Rocker Valve 3/2
Type 0127 Rocker Valve 3/2
Type 0331 Swing-Anchor Valve 3/2
Type 0331 Swing-Anchor Valve 3/2
Type 0331 Swing-Anchor Valve 3/2
Type 0355 Lift Armature Valve
Type 0355 Lift Armature Valve
Type 0355 Lift Armature Valve
Type 6014 Plunger Valve
Type 6014 Plunger Valve
Type 6014 Plunger Valve
Type 6144 Direct-acting 3/2-way flipper solenoid valve
Type 6144 Direct-acting 3/2-way flipper solenoid valve
Type 6144 Direct-acting 3/2-way flipper solenoid valve
Type 6164 3/2-way pneumatic cartridge solenoid valve
Type 6164 3/2-way pneumatic cartridge solenoid valve
Type 6164 3/2-way pneumatic cartridge solenoid valve
Type 6430 Servo-assisted 3/2-way piston valve
Type 6430 Servo-assisted 3/2-way piston valve
Type 6430 Servo-assisted 3/2-way piston valve
Type 6624 TwinPower rocker valve with separating diaphragm, 10 mm, 3/2-way
Type 6624 TwinPower rocker valve with separating diaphragm, 10 mm, 3/2-way
Type 6624 TwinPower rocker valve with separating diaphragm, 10 mm, 3/2-way
Type 6628 TwinPower rocker valve with separating diaphragm, 22 mm, 3/2-way
Type 6628 TwinPower rocker valve with separating diaphragm, 22 mm, 3/2-way
Type 6628 TwinPower rocker valve with separating diaphragm, 22 mm, 3/2-way
Type 6650 Flipper solenoid valve with media separation, 4.5 mm
Type 6650 Flipper solenoid valve with media separation, 4.5 mm
Type 6650 Flipper solenoid valve with media separation, 4.5 mm
Type 6724 Whisper Valve with media separation, 3/2-way
Type 6724 Whisper Valve with media separation, 3/2-way
Type 6724 Whisper Valve with media separation, 3/2-way
Type 6757 WhisperFlipper Valve w. media separation
Type 6757 WhisperFlipper Valve w. media separation
Type 6757 WhisperFlipper Valve w. media separation
Type 7012 Direct-acting 3/2-way plunger valve
Type 7012 Direct-acting 3/2-way plunger valve
Type 7012 Direct-acting 3/2-way plunger valve
Type 7016 Direct-acting 3/2-way plunger valve for hot water
Type 7016 Direct-acting 3/2-way plunger valve for hot water
Type 7016 Direct-acting 3/2-way plunger valve for hot water
Items  1 - 20 of 3187
I am already a customer.
Login for registered customers
Log in

Add product directly to the cart:

You can search by item no. or EAN/GTIN to quickly add the product to the cart.




Service & Hilfe
Service & Hilfe
Kundenservice & Support

Wir helfen und beraten Sie in allen Fragen

Kontakt
  Oberflächentechnik Seelmann e.K.
  Bauhüttenstr. 21 06847 Dessau-Roßlau Germany
  Tel: +493405407446
  Email: [email protected]
   (Mo-Fr.) 7:00 - 16:00