Solenoid valves 2/2 ways
A 2/2-way solenoid valve has two ports and two switching positions: it opens a line or shuts it off. Buerkert implements this function with several operating principles, and it is the operating principle that determines whether a valve switches from zero pressure, how much flow it can handle and which media it tolerates. This page groups the most important series accordingly. The higher-level selection with seat, diaphragm, check and ball valves can be found under Valves.
Direct-acting valves: switching from 0 bar
In direct-acting valves the solenoid coil moves the armature directly, so no minimum pressure is required. This makes them the first choice for small nominal sizes, unpressurised systems and static media. The plunger valve Type 6027 covers nominal sizes from 1 to 13 mm with Kv values from 0.03 to 3.6 m³/h, for media temperatures from −40 °C to +180 °C. The pivoted armature valve Type 0330 operates with media separation up to DN 5 and is also available as a 3/2-way version and in explosion-proof variants.
Servo-assisted diaphragm valves for high flow rates
From medium nominal sizes upwards, the media pressure does the work: the coil only switches a small pilot channel, and the diaphragm opens the main seat. This means that a low coil power is enough for high flow rates. The diaphragm valve Type 6213 goes up to DN 40 and is available with energy-saving Kick-and-Drop electronics. Type 5282 goes up to DN 65 and is designed for aggressive and contaminated media. Type 0290, up to DN 50, opens even without differential pressure thanks to its positively coupled diaphragm.
Piston valves for steam, hot water and gases
Where high temperatures and pressures act on the valve, servo-assisted piston valves are more robust than diaphragm versions. The piston valve Type 6240 with nominal sizes of 6, 12 and 13 mm and a PTFE or PCTFE seal is typical for steam and hot water. Type 5404, up to DN 50, is designed for gas and steam up to +180 °C and is often used as a compressor relief valve.
Media separation for laboratory, medical and analytical applications
With small liquid volumes, dead volume and purity matter more than flow rate. The rocker valve Type 0127 separates actuator and fluid by means of a diaphragm; the medium only comes into contact with the body and seal materials. It is easy to flush, virtually free of dead space and can be mounted in rows on manifolds to form valve blocks.
How to choose the right valve
First clarify the lowest operating pressure: if it drops towards zero, only a direct-acting or positively coupled valve is an option. Next, nominal size and Kv value determine the flow rate, not the connection thread. Medium and temperature define the body and seal materials. If the medium is not only to be switched but diverted or vented, Solenoid valves 3/2 ways are the right group.
All types in this category
- Type 0117 2/2-way plunger solenoid valve with separating diaphragm
- Type 0121 Flap-Anchor Valve 2/2
- Type 0127 Rocker Valve 2/2
- Type 0131 Direct-acting 2/2-way or 3/2-way toggle valve
- Type 0142 Diaphragm valve, 2/2-way, servo-assisted
- Type 0255 Lift-Anchor Valve
- Type 0256 Direct-acting 2/2-way solenoid valve
- Type 0290 Servo-assisted 2/2-way diaphragm valve
- Type 0293 Direct-acting 2/2-way plunger valve
- Type 0330 Direct-acting 2/2 or 3/2-way pivoted armature valve
- Type 0331 Swing-Anchor Valve 2/2
- Type 5282 Servo-assisted 2/2-way diaphragm valve
- Type 5404 Servo-assisted 2/2-way piston valve
- Type 5406 Piston valve 2/2-way servo-assisted
- Type 6013 Plunger valve, 2/2-way, direct-acting
- Type 6026 Plunger valve, 2/2-way, direct-acting
- Type 6027 Lift Arm Valve
- Type 6106 2/2 or 3/2-way pneumatic rocker solenoid valve
- Type 6211 Diaphragm valve 2/2-way servo-assisted
- Type 6213 Servo-assisted 2/2-way diaphragm valve
- Type 6240 Piston Valve
- Type 6281 Servo-assisted 2/2-way diaphragm valve
- Type 6407 Servo-assisted 2/2-way piston valve
- Type 6440 Servo-assisted 2/2-way piston valve
- Type 6624 Rocker Valve 2/2
- Type 6628 Rocker Valve 2/2
- Type 6724 Whisper Valve 2/2
- Type 6757 WhisperFlipper Valve w. media separation
- Type 7011 Plunger valve, 2/2-way, direct-acting
- Type 7015 2/2-way solenoid valve, direct-acting
Your advantage when buying from us
- Complete series in our range – direct-acting, servo-assisted and media-separated from a single source.
- Technical advice on operating principle, nominal size and seal material before you order.
- Delivery worldwide, purchase on account for business customers after review.
- Net prices for trade, public bodies and research institutions.
- Reordering by Buerkert part number, even years after the first purchase.
- A named contact person instead of an anonymous ticket system, reachable by phone and e-mail.
