Product Description
TwinPower rocker valve with separating diaphragm, 22 mm, 3/2-way
Direct-acting, media-separated 2/2 or 3/2-way rocker solenoid valve for the control of aggressive liquids and gases in medical analysis technology, the food industry and the chemical industry during dosing, filling, mixing and distribution. The medium is only in contact with the housing and seal material through the separating diaphragm. With its new TwinPower actuator, robust fitting and 22 mm width, this valve meets the most stringent requirements. The tried-and-tested rocker technology is characterised by full back pressure tightness, good flushability and a low internal volume. The Type 6628 is available in a wide variety of technical variants and provides perfect adaption in fluidics application with the aid of various fluidic body options.
Technical data
Valve & function (10)
| Type |
6628 |
| Valve construction |
Valve complete |
| Media separation |
Yes |
| Actuator type |
Rocker |
| Switch function |
on/off |
| Valve function |
T - all-purpose - pin assignment 1 (P/NC), 2 (A/in/out) and 3 (R/NO)according to use |
| Fluidic port connection quantity |
3 |
| Valve function quantity switch positions |
2 |
| Operation |
direct-acting |
| Installation width (nominal value) |
22 mm |
Materials & surfaces (4)
| Manual override material |
PPS (polyphenylene sulphide) |
| Fluidic body material |
PEEK (polyether ether ketone) |
| Valve seat seal material category |
Elastomers |
| Valve seat seal material |
FFKM (perfluoroelastomer rubber) |
Line connection (9)
| Port connection 1 type |
Internal thread |
| Port connection 1 thread type |
G |
| Port connection 1 thread marking |
1/8 |
| Port connection 2 type |
Internal thread |
| Port connection 2 thread type |
G |
| Port connection 2 thread marking |
1/8 |
| Port connection 3 type |
Internal thread |
| Port connection 3 thread type |
G |
| Port connection 3 thread marking |
1/8 |
Flow & pressure (6)
| Valve orifice size |
3 mm |
| QNn value (gas) |
180 l/min |
| Kv value (water) |
0,17 m3/h |
| Differential pressure max |
2 bar |
| Nominal pressure min |
-1 bar |
| Nominal pressure max |
2 bar |
Actuator (8)
| Manual override |
Yes |
| Manual override type |
Rotary lever |
| Manual override stop |
Yes |
| Manual override screw slot |
Yes |
| Switching time open max. |
25 ms |
| Switching time open typical |
25 ms |
| Switching time close max. |
25 ms |
| Switching time close typical |
25 ms |
Coil (12)
| Nominal operating mode / duty cycle |
100 % |
| Coil type |
permanently integrated |
| Coil insulation material (encasement) |
EP (epoxy resin) |
| Coil wiring LED |
No |
| Coil wiring overvoltage protection |
without |
| Coil wiring rectifier |
No |
| Coil wiring polarity protection |
No |
| Coil wiring polarity recovery diode |
No |
| Coil wiring polarity recovery diode redundant |
No |
| Rated power DC |
6,4 W |
| Nominal power |
5 W |
| Power reduction integrated |
No |
Electrical & signals (11)
| Electrical connection type |
Plug - rectangular grid dimension 5.08 |
| Electrical connection number of contacts |
2 |
| Cable plug in scope of delivery |
not included |
| Electrical connection position |
via NO |
| Electrical connection cable cable assembly |
tin-plated |
| Electrical connection polarity |
irrelevant |
| Voltage min / nominal voltage |
12 V |
| Voltage max / nominal voltage |
12 V |
| AC voltage |
No |
| DC voltage |
Yes |
| Battery voltage |
Yes |
Temperature (4)
| Environment temperature min |
10 °C |
| Environment temperature max |
55 °C |
| Medium temperature min |
10 °C |
| Medium temperature max |
55 °C |
Shipping & customs (4)
| Weight |
0,143 kg |
| Customs tariff number |
84818079 |
| Country of origin |
Germany |
| Export |
Not subject to export licensing |
Product benefits
- 22 mm compact design with DN 3.0
- Separating diaphragm for high chemical resistance
- USP Chapter 87/88 Class VI
- Back pressure tightness achieved by rocker principle
- Minimum internal volume with good rinsability
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)