| Category: |
Type 0331 Swing-Anchor Valve 2/2
|
| Features: |
3/2 - F - distributing valve - normally inlet port 1 (P/IN) connected with out let port 2 (B/NO), outlet port 4 (A/NC) closed |
| Valve diameter: |
4,00 mm (5/32 inch) |
| Rated voltage: |
230,00 V - 230,00 V |
| Temperature range: |
0,00 °C - 60,00 °C |
| Fluidics body material: |
Brass |
| Seat seal material: |
FKM (Fluor rubber) |
| Nominal pressure: |
0,00 bar - 5,00 bar |
| Line connection 1: |
Flanged |
| Scope of delivery: |
Valve complete |
| Fluidic port connection number: |
3 |
| Valve function number of switching positions: |
2 |
| Valve function: |
F - distributing valve - normally inlet port 1 (P/IN) connected with outlet port 2 (B/NO), outlet port 4 (A/NC) closed |
| Manual actuation: |
Yes |
| Manual actuation type: |
Key button |
| Port connection 1 type: |
Flanged |
| Manual actuation material: |
PA (Polyamide) |
| Manual actuation stop: |
Yes |
| Port connection 2 type: |
Flanged |
| Type: |
0331 |
| Voltage min / rated voltage: |
230 V |
| Voltage max / rated voltage: |
230 V |
| Voltage frequency: |
50 Hz |
| Voltage tolerance positive: |
10 % |
| Voltage tolerance negative: |
10 % |
| AC voltage: |
Yes |
| DC voltage: |
No |
| Battery voltage: |
No |
| Valve seat material: |
Brass |
| Main valve wetted material: |
Brass |
| Back-pressure-resistant version: |
No |
| Nominal pressure min: |
0 bar |
| Nominal pressure max (liquid): |
5 bar |
| Temperature medium min: |
0 °C |
| Temperature medium max: |
60 °C |
| Temperature environment max: |
55 °C |
| Seat seal material category: |
Elastomer |
| Seat seal material: |
FKM (Fluor rubber) |
| Temperature surface max: |
150 °C |
| Sealing toward outside material: |
FKM (Fluor rubber) |
| Rated power consumption: |
8 W |
| Kv value (water): |
0,18 m3/h |
| Seat seal material Shore hardness: |
70 |
| Main valve orifice 1 (P) (mm): |
4 mm |
| Main valve orifice 1 (inch): |
5/32 inch |
| Actuator type: |
Pivot |
| Operation: |
direct-acting |
| Media separation: |
Yes |
| Flow: |
Above seat |
| Main valve operating principle: |
Globe valve |
| Valve construction: |
Valve complete |
| Switch function: |
on/off |
| Switch time open min: |
8 ms |
| Switch time open max.: |
15 ms |
| Switch time close min: |
8 ms |
| Switch time close max.: |
15 ms |
| Electrical connection polarity: |
Irrelevant |
| Nominal operation/Duty cycle: |
100 % |
| Vacuum version: |
No |
| Analysis version: |
No |
| Oxygen version: |
Yes |
| Valve setting opening time: |
No |
| Valve setting closing time: |
No |
| Oil burner valve: |
No |
| Steam version: |
No |
| Installation length: |
46 mm |
| Main valve with integrated screen: |
No |
| Electrical connection sort: |
Plug pattern form A according to DIN EN 175301-803 |
| Electrical connection number of contacts: |
2 + Grounding conductor |
| Cable plug in delivery: |
enclosed |
| Electrical connection position: |
top |
| Cable plug art. no. - type: |
00314802 - 2518 |
| Protection type (IP max. with suitable connector): |
IP65 |
| Port connection 1 flange: |
Bürkert flange 32 x 46 version A2 |
| Low-noise version: |
No |
| Coil type: |
block bolted |
| Port connection 2 flange: |
Bürkert flange 32 x 46 version A2 |
| Coil insulation material (encasement): |
Epoxy |
| Electrical connection material: |
Brass |
| Coil wiring overvoltage protection: |
without |
| Coil wiring rectifier: |
No |
| Coil wiring polarity recovery diode: |
No |
| Thermal insulation class of the actuator: |
H |
| inrush power consumption AC: |
30 V·A |
| Rated power AC: |
15 V·A |
| Mounting type: |
Metric screws |
| Main valve orifice 3 (R) (mm): |
4 mm |
| Coil wiring polarity protection: |
No |
| Port connection 3 flange: |
Bürkert flange 32 x 46 version A2 |
| Port connection 3 type: |
Flanged |
| Parts free of oil and grease: |
Yes (according to DIS 1000020797) |
