| Item information | Value |
|---|---|
| Category: | Type 0355 Lift Armature Valve |
| Seat seal material: | NBR (Nitrile rubber) |
| Line connection 1: | Inner thread-3/8-G |
| Voltage max / rated voltage: | 230 V |
| Nominal pressure min: | 0 bar |
| Operation: | direct-acting |
| Valve function: | C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) |
| Nominal pressure max (liquid): | 6 bar |
| Temperature medium: | -10 °C-90 °C |
| Fluidic port connection number: | 3 |
| Valve function number of switching positions: | 2 |
| Valve function: | C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) |
| Manual actuation: | No |
| Port connection 1 type: | Inner thread |
| Port connection 1 thread marking: | 3/8 |
| Port connection 1 thread type: | G |
| Port connection 2 type: | Inner thread |
| Port connection 2 thread type: | G |
| Port connection 2 thread marking: | 3/8 |
| Type: | 0355 |
| Voltage min / rated voltage: | 230 V |
| Voltage max / rated voltage: | 230 V |
| Voltage frequency: | 50 Hz |
| Voltage tolerance positive: | 10 % |
| Voltage tolerance negative: | 10 % |
| AC voltage: | Yes |
| DC voltage: | No |
| Battery voltage: | No |
| Valve seat material: | Stainless steel |
| Main valve wetted material: | Brass |
| Back-pressure-resistant version: | No |
| Nominal pressure min: | 0 bar |
| Nominal pressure max (liquid): | 6 bar |
| Temperature medium min: | -10 °C |
| Temperature medium max: | 90 °C |
| Temperature environment max: | 55 °C |
| Seat seal material category: | Elastomer |
| Seat seal material: | NBR (Nitrile rubber) |
| Sealing toward outside material: | Brass and stainless steel |
| Rated power consumption: | 10 W |
| Kv value (water): | 0,4 m3/h |
| QNn value (gas): | 400 l/min |
| Main valve orifice 1 (P) (mm): | 4 mm |
| Main valve orifice 1 (inch): | 5/32 inch |
| Actuator type: | Plunger valve |
| Operation: | direct-acting |
| Media separation: | No |
| Flow: | Below seat |
| Main valve operating principle: | Globe valve |
| Valve construction: | Valve complete |
| Switch function: | on/off |
| Switch time open min: | 10 ms |
| Switch time open max.: | 20 ms |
| Switch time close min: | 20 ms |
| Switch time close max.: | 30 ms |
| Nominal operation/Duty cycle: | 100 % |
| Vacuum version: | Yes |
| Analysis version: | No |
| Oxygen version: | No |
| Valve setting opening time: | No |
| Valve setting closing time: | No |
| Oil burner valve: | No |
| Steam version: | No |
| Main valve with integrated screen: | No |
| Electrical connection sort: | Plug pattern form A according to DIN EN 175301-803 |
| Electrical connection number of contacts: | 2 + Grounding conductor |
| Cable plug in delivery: | enclosed |
| Electrical connection position: | in direction of flow left |
| Cable plug art. no. - type: | 00361687 - 2518 |
| Low-noise version: | No |
| Coil type: | placed on top |
| Coil insulation material (encasement): | Epoxy |
| Coil size: | 40 mm |
| Coil wiring overvoltage protection: | without |
| Protection type IP (max. with suitable connector): | IP65 |
| Coil wiring rectifier: | No |
| Coil wiring polarity recovery diode: | No |
| Thermal insulation class of the actuator: | H |
| Medium-contacting part core material: | Stainless steel |
| Medium-contacting part stopper material: | Stainless steel |
| Mounting type: | Mounting bracket |
| Port connection 3 type: | Outer thread |
| Port connection 3 thread type: | M |
| Port connection 3 thread marking: | 14 x 1,5 |
Technical Specifications
- 3/2 - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO)
- 4,00 mm (5/32 inch)
- 0,00 bar - 6,00 bar
- Brass
- Inner thread - G3/8
- 230,00 V - 230,00 V
- NBR (Nitrile rubber)
- -10,00 °C - 90,00 °C
- Valve complete
Description
The type 0355 is a direct-acting lift armature solenoid valve specially designed for controlling hot media such as vapors, oils, and gases.
- Direct-acting 3/2-way seat valve
- Slip-on coil system
- Designed for medium temperatures up to +180 °C
- Suitable for liquid and gaseous media
Your Benefits
- Worldwide shipping for all valves and measuring instruments
- Large stock levels for many products – just ask us for current lead times
- Spare parts and service kits are also available
- Fast delivery from stock via UPS (parcel) or DSV (pallet), express shipping available on request
- Extensive application know-how built on years of practical experience
- Personal advice on choosing the right component
- Resellers receive volume-based trade discounts on request – just get in touch with us directly
- Large enterprises, public authorities and government bodies can order on account – please contact us via our contact form
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
