| Item information | Value |
|---|---|
| Category: | Type 2100 Angled-Seat Valve |
| Seat seal material: | FKM (Fluor rubber) |
| Nominal pressure: | 0 bar-16 bar-PN 25-Class 150 |
| Line connection 1: | Inner thread-3/4-G |
| Fluidic port connection number: | 2 |
| Valve function number of switching positions: | 2 |
| Main valve operating principle: | Angle seat valve |
| Fluidic port connection number: | 2 |
| Valve function number of switching positions: | 2 |
| Control function: | A - normally closed (NC) |
| Manual actuation: | No |
| Additional manual actuation included: | No |
| Port connection 1 type: | Inner thread |
| CIP capable: | No |
| Port connection 1 thread marking: | 3/4 |
| SIP capable: | No |
| Port connection 1 thread type: | G |
| Valve body material: | Stainless steel |
| Type: | 2100 |
| Valve body material category: | Metals |
| Valve body surface treatment internal: | unmachined |
| Valve body surface treatment external: | untreated |
| Nominal pressure max: | 16 bar |
| Seat size: | 20 mm |
| Control pressure min: | 5,2 bar |
| Packed seal enclosed: | No |
| Nominal pressure min: | 0 bar |
| Control pressure max: | 10 bar |
| Control pressure vacuum: | No |
| Temperature medium min: | -10 °C |
| Temperature medium max: | 130 °C |
| Nominal pressure (DIN EN 1333): | PN 25 |
| Temperature environment min: | -10 °C |
| Temperature environment max: | 60 °C |
| Seat seal material category: | Elastomer |
| Seat seal material: | FKM (Fluor rubber) |
| Seal nipple body material: | Graphite |
| Piston seal material category: | Elastomer |
| Kv value (water): | 9,5 m3/h |
| Piston seal material: | FKM (Fluor rubber) |
| Actuator material: | PPS (Polyphenylene sulphide) |
| Interface to actuator: | metric |
| Body nominal size: | 20 mm |
| Body nominal size (IN): | 3/4 inch |
| Flow: | Below seat |
| Main valve operating principle: | Angle seat valve |
| Valve construction: | Valve complete |
| Valve piloting type: | Pneumatic |
| Product sub-group: | On/off valves |
| Actuator version: | ELEMENT |
| Position monitoring via magnetic piston: | No |
| Vacuum version: | No |
| Actuator size: | 50 mm |
| Oxygen version: | No |
| Actuator material category: | Plastics |
| O-ring between cover and bush: | No |
| Actuator increased chemical resistance: | No |
| Control cone: | No |
| Installation length: | 75 mm |
| Control air connection type: | Plug-in connection (hose) |
| Swivel plate material: | Stainless steel |
| Control air connection diameter (inch): | 1/4 inch |
| Swivel plate: | yes |
| Control air connection 1 pre-mounted: | not equipped |
| Control air connection 2 pre-mounted: | Silencer 902662 |
| Control air connection position: | in line direction |
| Control air connection diameter (mm): | 6 mm |
| Control air connection material: | Plastic |
| Manufacturer´s test certificate 3.1 included: | No |
| Nominal Pressure (DIN EN 1759): | Class 150 |
| Pipe material: | Stainless steel |
| Valve raw body manufacture: | cast |
Technical Specifications
- On/off valves
- Angle seat valve
- 0,00 bar - 16,00 bar
- -10,00 °C - 130,00 °C
- 2/2 - A - normally closed (NC)
- FKM (Fluor rubber)
- Stainless steel
- Inner thread - G3/4
Description
The Type 2100 is a pneumatically actuated angle seat valve developed specifically for decentralized process automation. Even under demanding operating conditions, it reliably meets the practical requirements of modern process plants. A special feature is its consistent ELEMENT design: it allows automation units to be easily integrated at any level of expansion — from purely electrical/optical position feedback, through pneumatic control, to a fully integrated fieldbus interface. The proven, self-adjusting stem packing with roof-type packing rings ensures a long service life and lasting tightness.
Valve and automation unit form a highly integrated system characterized by a compact, smooth-surfaced design and pilot air channels integrated into the body. Protection ratings IP65/67 and NEMA Type 4X, along with high chemical resistance, make the valve suitable for harsh environments as well.
- High flow rates
- Long service life
- Easy integration of automation units with ELEMENT design
- Flow-optimized stainless steel body, available with socket weld, clamp, or weld connections
- Also suitable for use with steam
Your Benefits
- Worldwide shipping for all valves and measuring instruments
- Large stock levels for many products – just ask us for current lead times
- Spare parts and service kits are also available
- Fast delivery from stock via UPS (parcel) or DSV (pallet), express shipping available on request
- Extensive application know-how built on years of practical experience
- Personal advice on choosing the right component
- Resellers receive volume-based trade discounts on request – just get in touch with us directly
- Large enterprises, public authorities and government bodies can order on account – please contact us via our contact form
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
