| Item information | Value |
|---|---|
| Category: | Type 5282 Servo-assisted 2/2-way diaphragm valve |
| Seat seal material: | FKM (Fluor rubber) |
| Valve function: | A - normally closed - inlet port 1 (P/NC) |
| Kv value (water): | 10 m3/h |
| Electrical connection sort: | Plug pattern form A according to DIN EN 175301-803 |
| Main valve orifice 1 (P) (mm): | 25 mm |
| Main valve wetted material: | Brass |
| Voltage min / rated voltage: | 24 V |
| Port connection 1 thread marking: | 1 |
| Item weight: | 1,85 kg |
Servo-assisted 2/2-way diaphragm valve
Servo-assisted diaphragm valve Type 5282: For aggressive & contaminated media, Explosion-proof variants for Cat. 2, Buy online now!.
Technical data
Valve & function (10)
| Type | 5282 |
| Operation | servo-controlled |
| Actuator type | Pivot |
| Main valve operating principle | Diaphragm valve |
| Switch function | on/off |
| Media separation | Yes |
| Valve function | A - normally closed - inlet port 1 (P/NC) |
| Valve function number of switching positions | 2 |
| Valve construction | Valve complete |
| Switching indicator | Electrical |
Pilot control (3)
| Pilot control orifice (mm) | 2 mm |
| Pilot control seal material | FKM (Fluor rubber) |
| Pilot control material medium-contacting | Brass |
Manual override (3)
| Manual actuation | Yes |
| Manual actuation type | Key button |
| Manual actuation stop | Yes |
Performance data (13)
| Nominal pressure min | 0,2 bar |
| Nominal pressure max (liquid) | 16 bar |
| Main valve orifice 1 (P) (mm) | 25 mm |
| Main valve orifice 1 (inch) | 1 inch |
| Kv value (water) | 10 m3/h |
| QNn value (gas) | 11.000 l/min |
| Installation length | 115 mm |
| Switch time open min | 100 ms |
| Switch time open max. | 800 ms |
| Switch time close min | 1.000 ms |
| Switch time close max. | 4.000 ms |
| Valve setting opening time | Yes |
| Valve setting closing time | Yes |
Fluid connections (7)
| Fluidic port connection number | 2 |
| Port connection 1 type | Internal thread |
| Port connection 1 thread type | G |
| Port connection 1 thread marking | 1 |
| Port connection 2 type | Internal thread |
| Port connection 2 thread type | G |
| Port connection 2 thread marking | 1 |
Materials (4)
| Main valve wetted material | Brass |
| Seat seal material category | Elastomers |
| Seat seal material | FKM (Fluor rubber) |
| Sealing toward outside material | FKM (Fluor rubber) |
Temperature & protection (4)
| Temperature environment max | 55 °C |
| Temperature medium min | 0 °C |
| Temperature medium max | 60 °C |
| Protection type IP (max. with suitable connector) | IP65 |
Electrical data (12)
| Voltage min / rated voltage | 24 V |
| Voltage max / rated voltage | 24 V |
| Voltage tolerance negative | 10 % |
| Voltage tolerance positive | 10 % |
| AC voltage | No |
| DC voltage | Yes |
| Battery voltage | Yes |
| Rated power DC | 11 W |
| Reduced power DC | 8 W |
| Rated power consumption | 8 W |
| Thermal insulation class of the actuator | H |
| Nominal operation/Duty cycle | 100 % |
Electrical connection (4)
| Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 |
| Electrical connection number of contacts | 2 + Grounding conductor |
| Electrical connection position | top |
| Electrical connection polarity | Irrelevant |
Solenoid coil (5)
| Coil type | block bolted |
| Coil insulation material (encasement) | Epoxy |
| Coil wiring overvoltage protection | without |
| Coil wiring rectifier | No |
| Coil wiring polarity recovery diode | No |
Versions & options (9)
| Back-pressure-resistant version | No |
| Vacuum version | No |
| Analysis version | No |
| Oxygen version | Yes |
| Oil burner valve | No |
| Steam version | No |
| Low-noise version | No |
| Main valve with integrated screen | No |
| Parts free of oil and grease | Yes (according to DIS 1000020797) |
Shipping & customs (4)
| Weight | 1,850 kg |
| Customs tariff number | 84818079 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- Servo-assisted diaphragm valve up to DN 65 orifice
- Separating diaphragm for aggressive and contaminated media
- Closing and opening times can be adjusted individually
- Explosion-proof variants (Cat. 2)
- Service-friendly manual override
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
