| Item information | Value |
|---|---|
| Category: | Type 6106 Rocker Solenoid Valve |
| Fluidics body material: | PA (Polyamide) |
| Seat seal material: | FKM (Fluor rubber) |
| Line connection 1: | Flanged-Bürkert flange 16 x 27 version D3 |
| Voltage max / rated voltage: | 240 V |
| Nominal pressure min: | -1 bar |
| Operation: | direct-acting |
| Valve function: | C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) |
| Nominal pressure max: | 10 bar |
| Temperature medium: | -10 °C-55 °C |
| Fluidic port connection number: | 3 |
| Valve function number of switching positions: | 2 |
| Valve function: | C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) |
| Manual actuation: | Yes |
| Manual actuation type: | Rotary level |
| Port connection 1 type: | Flanged |
| Manual actuation material: | PA (Polyamide) |
| Manual actuation stop: | Yes |
| Port connection 2 type: | Flanged |
| Type: | 6106 |
| Voltage min / rated voltage: | 220 V |
| Voltage max / rated voltage: | 240 V |
| AC voltage: | No |
| Fluidics body material: | PA (Polyamide) |
| DC voltage: | Yes |
| Battery voltage: | Yes |
| Nominal pressure max: | 10 bar |
| Nominal pressure min: | -1 bar |
| Temperature medium min: | -10 °C |
| Temperature medium max: | 55 °C |
| Temperature environment min: | -10 °C |
| Temperature environment max: | 55 °C |
| Seat seal material category: | Elastomer |
| Seat seal material: | FKM (Fluor rubber) |
| Sealing toward outside material: | FKM (Fluor rubber) |
| Valve diameter: | 1,2 mm |
| Rated power consumption: | 3 W |
| QNn value (gas): | 47 l/min |
| Actuator type: | Rocker |
| Operation: | direct-acting |
| Switch time open characteristic: | 25 ms |
| Media separation: | No |
| Switch time close characteristic: | 25 ms |
| Power reduction integrated: | No |
| Installation width (nominal value): | 16 mm |
| Valve construction: | Valve complete |
| Switch function: | on/off |
| Electrical connection polarity: | Irrelevant |
| Nominal operation/Duty cycle: | 100 % |
| Coil wiring LED: | No |
| Coil wiring polarity recovery diode redundant: | No |
| Electrical connection sort: | Plug pattern form C according to DIN EN 175301-803 |
| Electrical connection number of contacts: | 2 + Grounding conductor |
| Cable plug in delivery: | not included |
| Electrical connection position: | top |
| Port connection 1 flange: | Bürkert flange 16 x 27 version D3 |
| Coil type: | block bolted |
| Coil cover colour: | black |
| Coil insulation material (encasement): | PPS (Polyphenylene sulphide) |
| Port connection 2 flange: | Bürkert flange 16 x 27 version D3 |
| Coil wiring overvoltage protection: | without |
| Coil wiring rectifier: | No |
| Coil wiring polarity recovery diode: | No |
| Mounting (flange) type: | Metric screws |
| Mounting (flange) material: | Steel |
| Coil wiring polarity protection: | No |
| Rated power DC: | 3,4 W |
| Port connection 3 flange: | Bürkert flange 16 x 27 version D3 |
| Port connection 3 type: | Flanged |
| Manual actuation screw slot: | Yes |
| Manual actuation position: | above port 1 |
Technical Specifications
- 1,20 mm
- -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO)
- direct-acting
- 220,00 V - 240,00 V
- -10,00 °C - 55,00 °C
- PA (Polyamide)
- FKM (Fluor rubber)
Description
The rocker-type solenoid valve Type 6106 is direct-acting and specifically designed for use with neutral gaseous media. An additional stainless steel plate separates the valve body from the solenoid coil, ensuring minimal heat input into the medium flowing through the valve.
Mounting is flexible: the valve can be flange-mounted directly or installed on a single or multiple connection plate. Typical fields of application include dosing, filling, mixing, and distributing media.
- Compact design with 16 mm center-to-center spacing
- Nominal sizes DN 0.9 and DN 1.2, rated up to 10 bar
- Long service life
- Low electrical power consumption; optionally available in ATEX Ex ia version
- Designed for pneumatic applications
Your Benefits
- Worldwide shipping for all valves and measuring instruments
- Large stock levels for many products – just ask us for current lead times
- Spare parts and service kits are also available
- Fast delivery from stock via UPS (parcel) or DSV (pallet), express shipping available on request
- Extensive application know-how built on years of practical experience
- Personal advice on choosing the right component
- Resellers receive volume-based trade discounts on request – just get in touch with us directly
- Large enterprises, public authorities and government bodies can order on account – please contact us via our contact form
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
