| Item information | Value |
|---|---|
| Category: | Type 6213 Servo-assisted 2/2-way diaphragm valve |
| Seat seal material: | EPDM (Ethylene-propylene-diene rubber) |
| Valve function: | A - normally closed - inlet port 1 (P/NC) |
| Kv value (water): | 3,6 m3/h |
| Electrical connection sort: | Wire cable |
| Main valve orifice 1 (P) (mm): | 13 mm |
| Main valve wetted material: | Brass |
| Voltage min / rated voltage: | 230 V |
| Port connection 1 thread marking: | 1/2 |
| Item weight: | 1,16 kg |
Servo-assisted 2/2-way diaphragm valve
Valve 6213 EV is a servo-assisted diaphragm valve. The spring coupling of the diaphragm supports the opening process in the valve. In its standard variant, the valve is suitable for deployment with liquids. A minimum differential pressure is required for full opening. For gas and vacuum applications, a special variant is available (HP00) that opens the valve without differential pressure. Various diaphragm materials are available depending on the actual application. The body is is available in brass, stainless steel and gunmetal. For other markets, dezincification-resistant brass is available. To reduce electrical power consumption during operation, coils with integrated Kick-and-Drop (KD) electronics featuring double coil technology are available.
Technical data
Valve & function (11)
| Type | 6213 |
| Operation | servo-controlled |
| Actuator type | Plunger valve |
| Main valve operating principle | Diaphragm valve |
| Switch function | on/off |
| Media separation | No |
| Valve function | A - normally closed - inlet port 1 (P/NC) |
| Valve function number of switching positions | 2 |
| Valve construction | Valve complete |
| Flow | Above seat |
| Generation | EV |
Pilot control (4)
| Pilot control orifice (mm) | 1,1 mm |
| Pilot control seal material | EPDM (Ethylene-propylene-diene rubber) |
| Pilot control centrally bolted | Yes |
| Pilot control material medium-contacting | PA (Polyamide) |
Manual override (1)
| Manual actuation | No |
Performance data (14)
| Nominal pressure min | 0 bar |
| Nominal pressure max (liquid) | 10 bar |
| Nominal pressure (DIN EN 1333) | PN 10 |
| Main valve orifice 1 (P) (mm) | 13 mm |
| Main valve orifice 1 (inch) | 1/2 inch |
| Kv value (water) | 3,6 m3/h |
| QNn value (gas) | 3.900 l/min |
| Installation length | 58 mm |
| Switch time open min | 50 ms |
| Switch time open max. | 100 ms |
| Switch time close min | 200 ms |
| Switch time close max. | 400 ms |
| Valve setting opening time | No |
| Valve setting closing time | No |
Fluid connections (7)
| Fluidic port connection number | 2 |
| Port connection 1 type | Internal thread |
| Port connection 1 thread type | G |
| Port connection 1 thread marking | 1/2 |
| Port connection 2 type | Internal thread |
| Port connection 2 thread type | G |
| Port connection 2 thread marking | 1/2 |
Materials (8)
| Main valve wetted material | Brass |
| Medium-contacting part core material | Stainless steel |
| Medium-contacting part stopper material | Stainless steel |
| Valve seat material | Brass |
| Seat seal material category | Elastomers |
| Seat seal material | EPDM (Ethylene-propylene-diene rubber) |
| Sealing toward outside material | EPDM (Ethylene-propylene-diene rubber) |
| Valve body cover material | Stainless steel |
Temperature & protection (5)
| Temperature environment min | -30 °C |
| Temperature environment max | 70 °C |
| Temperature medium min | -30 °C |
| Temperature medium max | 100 °C |
| Protection type IP (max. with suitable connector) | IP65 |
Electrical data (15)
| Voltage min / rated voltage | 230 V |
| Voltage max / rated voltage | 240 V |
| Voltage tolerance negative | 10 % |
| Voltage tolerance positive | 10 % |
| Voltage frequency 1 | 50/60 Hz |
| AC voltage | Yes |
| DC voltage | No |
| Battery voltage | No |
| Rated power DC | 6,5 W |
| Reduced power DC | 6,5 W |
| Rated power consumption | 44 W |
| inrush power consumption AC | 44 V·A |
| Rated power AC | 6,5 V·A |
| Thermal insulation class of the actuator | H |
| Nominal operation/Duty cycle | 100 % |
Electrical connection (4)
| Electrical connection sort | Wire cable |
| Electrical connection number of contacts | 2 + Grounding conductor |
| Electrical connection position | in direction of flow left |
| Electrical connection wire length | 3.000 mm |
Solenoid coil (9)
| Coil type | placed on top |
| Coil size | 42 mm |
| Coil insulation material (encasement) | Epoxy |
| Coil wiring overvoltage protection | without |
| Coil wiring rectifier | No |
| Coil wiring polarity protection | No |
| Coil wiring polarity recovery diode | No |
| Kick and Drop coil | Energy saving technology included |
| Power reduction integrated | Yes |
Versions & options (7)
| Back-pressure-resistant version | No |
| Vacuum version | No |
| Analysis version | No |
| Oil burner valve | No |
| Steam version | No |
| Low-noise version | No |
| Main valve with integrated screen | No |
Approvals (2)
| Approval type | ATEX, Material-approval-drinking water, IECEx |
| Certification type | II 2 D Ex mb IIIC T130°C Db, KTW-BWGL, Ex mb IIIC T130°C Db, Ex mb IIC T4 Gb, II 2 G Ex mb IIC T4 Gb |
Shipping & customs (4)
| Weight | 1,160 kg |
| Customs tariff number | 84818079 |
| Country of origin | Germany |
| Export | Not subject to export licensing |
Product benefits
- Servo-assisted diaphragm valve with nominal diameter of up to DN 40
- Spring coupled diaphragm opens without differential pressure
- Damped design for low noise
- High flow rate with compact design
- Energy-saving double coil technology with kick and drop variant
Your Benefits With Us
- Worldwide shipping of all valves and flow meters
- Large stock levels for many products – current lead time available on request
- Spare parts and service kits available
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de
