| Category: |
Type 7012 Lift-Arm Solenoid Valve
|
| Seat seal material: |
FKM (Fluor rubber) |
| Line connection 1: |
Inner thread-5-M- |
| Voltage max / rated voltage: |
230 V |
| Nominal pressure min: |
0 bar |
| Operation: |
direct-acting |
| Valve function: |
C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) |
| Nominal pressure max (liquid): |
13 bar |
| Temperature medium: |
-10 °C-100 °C- |
| Fluidic port connection number: |
3 |
| Valve function number of switching positions: |
2 |
| Valve function: |
C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO) |
| Manual actuation: |
No |
| Port connection 1 type: |
Inner thread |
| Port connection 1 thread marking: |
5 |
| Port connection 1 thread type: |
M |
| Port connection 2 type: |
Inner thread |
| Port connection 2 thread type: |
M |
| Type: |
7012 |
| Port connection 2 thread marking: |
5 |
| Voltage min / rated voltage: |
230 V |
| Voltage max / rated voltage: |
230 V |
| Voltage frequency: |
50 Hz |
| Voltage tolerance positive: |
10 % |
| Voltage tolerance negative: |
10 % |
| AC voltage: |
Yes |
| DC voltage: |
No |
| Battery voltage: |
No |
| Main valve wetted material: |
Stainless steel |
| Back-pressure-resistant version: |
No |
| Nominal pressure min: |
0 bar |
| Nominal pressure max (liquid): |
13 bar |
| Temperature medium min: |
-10 °C |
| Temperature medium max: |
100 °C |
| Temperature environment min: |
-10 °C |
| Temperature environment max: |
75 °C |
| Seat seal material category: |
Elastomer |
| Seat seal material: |
FKM (Fluor rubber) |
| Sealing toward outside material: |
FKM (Fluor rubber) |
| Rated power consumption: |
4 W |
| Kv value (water): |
0,045 m3/h |
| Main valve orifice 1 (P) (mm): |
1,2 mm |
| Main valve orifice 1 (inch): |
3/64 inch |
| Actuator type: |
Plunger valve |
| Operation: |
direct-acting |
| Media separation: |
No |
| Flow: |
Below seat |
| Main valve operating principle: |
Piston |
| Valve construction: |
Valve complete |
| Switch function: |
on/off |
| Switch time open min: |
8 ms |
| Switch time open max.: |
12 ms |
| Switch time close min: |
8 ms |
| Switch time close max.: |
12 ms |
| Nominal operation/Duty cycle: |
100 % |
| Vacuum version: |
No |
| Analysis version: |
No |
| Valve setting opening time: |
No |
| Valve setting closing time: |
No |
| Oil burner valve: |
No |
| Steam version: |
No |
| Main valve with integrated screen: |
No |
| Electrical connection sort: |
Plug pattern form B according to industrial standard |
| Electrical connection number of contacts: |
2 + Grounding conductor |
| Cable plug in delivery: |
not included |
| Electrical connection position: |
in direction of flow left |
| Low-noise version: |
No |
| Coil type: |
placed on top |
| Coil insulation material (encasement): |
Epoxy |
| Coil size: |
24,5 mm |
| Coil wiring overvoltage protection: |
without |
| Protection type IP (max. with suitable connector): |
IP65 |
| Coil wiring rectifier: |
No |
| Coil wiring polarity recovery diode: |
No |
| Thermal insulation class of the actuator: |
H |
| inrush power consumption AC: |
12 V·A |
| Rated power AC: |
6,5 V·A |
