IF200.D10L-Q41.GP2O.71CV/A014 Inductive distance sensors (11240173)

IF200.D10L-Q41.GP2O.71CV/A014 Inductive distance sensors (11240173)

SKU: BAU.11240173

HAN: 11240173

Category: Inductive distance sensors with IO-Link

Low stock level

233,84 €

incl. 19% VAT ,

Manufacturers:

Baumer

Inductive distance sensors

Large measuring range from 0...10 mm
IO-Link Dual Channel with 2 independent switching outputs
Easy commissioning due to linearized output signal
Application-specific setting by qTeach or Teach via IO-Link
Extended IO-Link diagnostic data and histograms
Robust plastic housing usable up to +75°C

no description available

Technical data

General data
Mounting type	Non-flush
Special type	Linearized
Particular characteristics	IO-Link dual channel
Type	Distance measuring
Measuring distance Sd	0 … 10 mm
Resolution	< 0.022 mm (High Accuracy Mode)
Repeat accuracy	0.022 mm
Adjustment	qTeach IO-Link
Teach	Single point, Two point, Window
Linearity error	± 40 µm (S = 0 ... 8 mm) ± 60 µm (S = 0 ... 10 mm)
Temperature drift	± 2 % (Full Scale)
Hysteresis	< 99 % (adjustable)
Power on indication	LED green
Output indicator	LED yellow
Output indicator Output 2	LED red
Electrical data
Response time (factory characteristic)	< 0.6 ms (High Speed Mode) < 0.9 ms (Standard Mode) < 2.3 ms (Robust Mode) < 10.5 ms (High Accuracy Mode)
Switching frequency	800 Hz (High Speed Mode) 500 Hz (Standard Mode) 150 Hz (Robust Mode) 30 Hz (High Accuracy Mode)
Voltage supply range +Vs	8 … 30 VDC
Current consumption max. (no load)	25 mA
Output circuit	PNP Push-pull IO-Link
Output current	100 mA, sum of all outputs
Voltage drop Vd	<2.5 VDC
Short circuit protection	Yes
Reverse polarity protection	Yes
Baud rate	230.4 kBaud (COM 3)
Mechanical data
Design	Rectangular
Material (sensing face)	SAN
Housing material	SAN
Dimension	20 mm
Housing length	41 mm
Connection types	Cable PVC, 2 m
Ambient conditions
Operating temperature	-25 … +75 °C
Protection class	IP 67
Communication interface
Interface	IO-Link V1.1
Baud rate	230.4 kBaud (COM 3)
Cycle time	≥ 0.6 ms
Process data length	32 Bit
Process data structure	Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 3 = alarm Bit 4 = SSC3 (frequency) Bit 5 = SSC4 (counter) Bit 16-31 = 16 Bit measurement
IO-Link port type	Class A
Adjustable parameters	Measuring range Switching point Switching hysteresis Measured value filtering Time filters LED status indicators Output logic Output circuit Counter Deactivate the sensor element Find Me function
Additional data	Distance Frequency Operating cycles Operating hours Boot cycles Operating voltage Device temperature Histograms

Item information	Value
Type:	Distance measuring
Repeatability:	0.022 mm
Resolution:	< 0.022 mm (High Accuracy Mode)
Power on indication:	LED green
Special type:	Linearized
Hysteresis:	< 99 % (adjustable)
Installation type:	Non-flush
Output indicator:	LED yellow
Temperature drift:	± 2 % (Full Scale)
Measuring distance Sd:	0 … 10 mm
Particular characteristics:	IO-Link dual channel
Adjustment:	qTeach IO-Link
Linearity error:	± 40 µm (S = 0 ... 8 mm) ± 60 µm (S = 0 ... 10 mm)
Teach:	Single point, Two point, Window
Output indicator Output 2:	LED red