IF200.D10L-Q41.DPMO.71N/A014 Inductive distance sensors (112

IF200.D10L-Q41.DPMO.71N/A014 Inductive distan

IF200.D10L-Q41.DPMO.71N/A014 Inductive distance sensors (11241894)

Name: IF200.D10L-Q41.DPMO.71N/A014 Inductive distance sensors (11241894)
Brand: Baumer
SKU: BAU.11241894
Price: 241.10 EUR
Availability: InStock

Item No.: BAU.11241894

HAN: 11241894

241,10 €

excl. 19% VAT (Paket)

Low stock level

Delivery time: 1 - 5 Workdays Other countries

Inductive distance sensors

Large measuring range from 0...10 mm
IO-Link switching output and additional analog output
Simple commissioning due to linearized output signal
Application-specific setting by qTeach or Teach via IO-Link
Extended IO-Link diagnostic data and histograms
Robust plastic housing usable up to +75°C

More product details

Product Information

Item information	Value
Category:	Inductive distance sensors with IO-Link
Function:	Distance measuring
Repeatability:	0.020 mm
Resolution:	< 0.020 mm (High Accuracy Mode)
Power on indication:	LED green
Special type:	Linearized
Hysteresis:	< 99 % (adjustable)
Installation type:	Non-flush
Output indicator:	LED yellow
Temperature drift:	± 2 % (Full Scale)
Measuring distance Sd:	0 … 10 mm
Particular characteristics:	IO-Link dual channel
Adjustment:	qTeach IO-Link
Linearity error:	± 40 µm (S = 0 ... 8 mm) ± 60 µm (S = 0 ... 10 mm)
Teach:	Single point, Two point, Window

Product Description

no description available

Technical data

General data
Mounting type	Non-flush
Special type	Linearized
Particular characteristics	IO-Link dual channel
Type	Distance measuring
Measuring distance Sd	0 … 10 mm
Resolution	< 0.020 mm (High Accuracy Mode)
Repeat accuracy	0.020 mm
Adjustment	qTeach IO-Link
Teach	Single point, Two point, Window
Linearity error	± 40 µm (S = 0 ... 8 mm) ± 60 µm (S = 0 ... 10 mm)
Temperature drift	± 2 % (Full Scale)
Hysteresis	< 99 % (adjustable)
Power on indication	LED green
Output indicator	LED yellow
Electrical data
Response time (factory characteristic)	< 0.6 ms (High Speed Mode) < 0.9 ms (Standard Mode) < 2.3 ms (Robust Mode) < 10.5 ms (High Accuracy Mode)
Switching frequency	800 Hz (High Speed Mode) 500 Hz (Standard Mode) 150 Hz (Robust Mode) 30 Hz (High Accuracy Mode)
Voltage supply range +Vs	12 … 30 VDC
Current consumption max. (no load)	25 mA
Output circuit	PNP Push-pull Analog 0 ... 10 VDC IO-Link
Load resistance	> 10 kOhm
Output current	100 mA
Voltage drop Vd	<2.5 VDC
Short circuit protection	Yes
Reverse polarity protection	Yes
Baud rate	230.4 kBaud (COM 3)
Mechanical data
Design	Rectangular
Material (sensing face)	SAN
Housing material	SAN
Dimension	20 mm
Housing length	41 mm
Connection types	Connector M8 4 pin
Ambient conditions
Operating temperature	-25 … +75 °C
Protection class	IP 67
Communication interface
Interface	IO-Link V1.1
Baud rate	230.4 kBaud (COM 3)
Cycle time	≥ 0.6 ms
Process data length	32 Bit
Process data structure	Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 3 = alarm Bit 4 = SSC3 (frequency) Bit 5 = SSC4 (counter) Bit 16-31 = 16 Bit measurement
IO-Link port type	Class A
Adjustable parameters	Measuring range Switching point Switching hysteresis Measured value filtering Time filters LED status indicators Output logic Output circuit Counter Deactivate the sensor element Find Me function
Additional data	Distance Frequency Operating cycles Operating hours Boot cycles Operating voltage Device temperature Histograms

Write the first review for this item and help others make a purchase decision!

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail^*

Phone - optional

Question about item

Manufacturer according to GPSR
Baumer GmbH, Pfingstweide 28, 61169 Friedberg, Hessen, Deutschland, [email protected], https://www.baumer.com