Product Description
Turck FM-IM-2UPLI63X Evaluation unit for flow sensors
The Turck FM-IM-2UPLI63X is an evaluation unit for flow sensors. Design evaluation unit, output signal analog output + IO-Link, connection via terminal block, operating voltage 20…30 VDC, protection class IP20, housing made of plastic. Ident no. 7525104, EAN 4047101260571.
Features
- Analog output for flow
- Transistor switching outputs for temperature and faults
- Teaching upper and lower flow limit
- LED band for indication of flow rate and media temperature
- Monitoring of operating and display range
- Detection of wire-break and short-circuit on the sensor side
- Standard IO or IO-Link operating mode
- Parametrized via pushbutton or software- supported via IO-Link
Technical data
Outputs (11)
| Characteristic |
Output of probe signal, no linearization |
| Current range |
4…20 mA / 20…4 mA parametrizable |
| Error monitoring |
transistor output |
| Error recognition |
NAMUR error limits |
| Flow monitoring |
Analog output |
| Load |
<600 Ω |
| Switching characteristic |
PNP |
| Switching current |
100 mA |
| Switching state |
active high / active low parametrizable (transistor output error monitoring only active low) |
| Switching voltage |
20…30 VDC |
| Temperature monitoring |
transistor output |
LED display (9)
| Medium temperature |
Status |
| LED Color |
Status |
| Pwr Green |
Status |
| Flow Yellow |
On Flashing |
| Temp Yellow |
Off On Flashing |
| Fault Red |
Off On |
| Detailedüdescription of display patterns and |
blink codes according to theäß manual |
| Bit 15 14 13 12 11 |
10 9 8 7 6 |
| Flow value 10 bit (bit 15 = MSB, |
bit 6 = LSB) |
Electrical data (7)
| Output function |
Analog output |
| Short-circuit protection |
yes |
| Wire break/reverse polarity protection |
yes |
| Measuring accuracy media temperature |
typisch ±7 K |
| No-load current I 0 |
≤63 mA |
| Switchpoint hysteresis media temperature |
2 K |
| Teach modes |
Min/max adjustment. Teach modes incl. DeltaFlow monitoring (teach modes are automatically released with the change of flow speed). |
Mechanical data (7)
| Design |
Signal processor |
| Dimensions |
110 mm x 27 mm x 89 mm |
| Housing material |
Plastic, Polycarbonate/ABS |
| Electrical connection |
Terminal block |
| Connection mode |
screw connection |
| Electrical connections |
5-pole removable reverse polarity protected terminal blocks |
| Mounting type |
DIN rail mounting and mounting panel |
IO-Link (6)
| IO-Link specification |
V 1.0 |
| Transmission rate |
38.4 kBit/s (COM 2) |
| Transmission physics |
Transmission physics 3-wire physics (PHY 2) |
| Communication channel |
Clamp 12 and via front panel jack COM (PC) |
| Communication modes |
Tool based engineering via FDT / DTM, IODD. Acyclic communication via On- Request Data Objects |
| Included in the SIDI GSDML |
yes |
Inputs (5)
| Input function |
Connection of flow sensors (non-Ex sensors of the FCS/FCI product series only!) |
| Measuring frequency |
5 Hz (every 200 ms with software filter) |
| Sensor current |
≤35 mA |
| Sensor current limitation |
ca.110 mA |
| Sensor voltage |
≤15 VDC |
Ambient conditions (5)
| Ambient temperature |
-25...+70 °C |
| Relative humidity |
EN 60068-2-38 |
| Electromagnetic compatibility (EMC) |
Acc. to NE21 |
| Protection class |
IP20, terminals / housing (IEC 60529 / EN 60529) |
| Protection class (terminals/housing) |
IP20 / IP40 |
Tests/approvals (4)
| UL registration number |
E345414 |
| Approvals |
UL |
| Approvals |
cULus |
| Approvals |
CE, C-UL U.S. submitted |
Power supply (2)
| Operating voltage UB |
20…30 VDC |
| Power consumption |
<4,5 W |
Accuracy/deviation (2)
| Repeatability flow rate |
typisch ±1 % (of Measuring range) |
| Repeatability media temperature |
typisch ±1 K |
Displays/controls (2)
| MTBF |
[%] acc. to Min-/Max Adjustment (permanent) |
| Medium temperature |
% after Quick-Teach (permanent) |
Application area (1)
| Application area |
Standard |
Interfaces (1)
| Communication protocol |
IO-Link |
Cable (1)
| Terminal cross-section |
1.5…2,5 mm² |
Delivery time and availability
For urgent orders please ask us for the exact delivery time in advance; on request we check express shipping.
Your Benefits With Us
- Worldwide shipping of all Turck items
- Large stock levels for many products – current lead time available on request
- Positioning elements, process adapters, antennas and connection cables available on request
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
