Product Description
Turck TBEN-S1-8DIP Field logic controller
The Turck TBEN-S1-8DIP is a field logic controller. Signal type digital input, 8 channels, fieldbus CC-Link IE Field Basic, EtherNet/IP, Modbus TCP, PROFINET, for Zone 2, Zone 22, transmission rate 10/100 Mbit/s, protection class IP65/IP67/IP69K, connection via m8, ambient temperature from -40 °C. Ident no. 6814020, EAN 4047101299960.
Features
- PROFINET device, EtherNet/IP device, Modbus TCP server, CC-Link IE field basic
- Integrated Ethernet switch
- Supports 10 Mbps/100 Mbps
- 2 × M8, 4-pin, Ethernet fieldbus connection
- PROFINET S2 system redundancy
- Fibre-glass reinforced housing
- Shock and vibration tested
- Fully potted module electronics
- Protection classes IP65, IP67, IP69K
- 4-pin M8 male connector for power supply
- Galvanically isolated voltage groups support passive safety
- ATEX zone 2/22
- CCC-Ex
- Input diagnostics per group
- Programmable ARGEE Description Ethernet link (100 Mbps) Ethernet communication (100 Mbps) Ethernet link (10 Mbps) Ethernet communication (10 Mbps) No Ethernet link Active connection to a master Steady flashing: Ready Sequence of 3 flashes in 2 seconds: FLC/ARGEE active IP address conflict or Restore Mode or Modbus timeout Blink/Wink command active Waiting for assignment of an IP address, DHCP or BootP Power off No diagnostics available Diagnostics available Undervoltage diagnosis response is parameter dependent Cyclical IO data exchange Cyclical IO data exchange, diagnostics available Discovery mode active Discovery mode active, diagnostics available V1 power supply OK V1 power supply off or V1 undervoltage Description Input active Overload of the port supply. All LEDs of the affected group C0-C3 or C4-C7 are flashing. Input inactive Blink/Wink command active Bit Bit Bit Bit Bit Bit Bit 6 5 4 3 2 1 0 - - - - - - Diag Warn Bit Bit Bit Bit Bit Bit Bit 6 5 4 3 2 1 0 h6 Ch5 Ch4 Ch3 CH2 CH1 CH0 6 DI5 DI4 DI3 DI2 DI1 DI0 6 C5 C4 C3 C2 C1 C0 P4 P4 P4 P4 P4 P4 Bit Bit Bit Bit3 Bit Bit Bit 6 5 4 2 1 0 Bit Bit Bit Bit3 Bit Bit Bit 6 5 4 2 1 0 DI6 DI5 DI4 DI3 DI2 DI1 DI0 - - - - - VERR VERR V1 V1 CH47 CH03 ency LSB ed - - - - - - DIAG Bit Bit Bit Bit3 Bit Bit Bit 6 5 4 2 1 0 Bit Bit Bit Bit3 Bit Bit Bit 6 5 4 2 1 0 DI6 DI5 DI4 DI3 DI2 DI1 DI0 - - - - - - CNT_ RST I/O configuration error I/O-ASSISTANT Force Mode active Pin x Digital output channel x Overcurrent output channel x Overcurrent PWM output Supply VAUXx, pin y, port z Counter reset M8 female connector, straight, 4-pin to M8 straight, 4-pin; cable length: 2 m, jacket ack; cULus approval e, M8 female connector, straight, 4-pin, cable et material: PUR, black; cULus approval e, M8 female connector, angled, 4-pin, cable et material: PUR, black; cULus approval sor cordset, extension cable, M8 female ht, 4-pin, with thread, M8 male connector, th thread, cable length 2 m, cable jacket PVC, e lengths and versions available, see M8 female connector, straight, 3-pin to M8 straight, 3-pin; cable length: 0.3 m, jacket ack; cULus approval M8 female connector, straight, 3-pin to M8 straight, 3-pin; cable length: 2 m, jacket ack; cULus approval M8 female connector, angled, 3-pin to M8 straight, 3-pin; cable length: 2 m, jacket ack; cULus approval e, M8 male connector, straight, 3-pin, cable et material: PUR, black; cULus approval e, M8 male connector, angled, 3-pin, cable et material: PUR, black; cULus approval sor cordset, extension cable, M8 female ht, 3-pin, with thread, M8 male connector, th thread, cable length 2 m, cable jacket PVC, e lengths and versions available, see al Ethernet, used as a bridge for connecting ules; M8 male connector, straight to M8 male ht, cable length: 0.2 m, jacket material: PUR, al Ethernet, extension cable, M8 male ht to M8 male connector, straight, cable length: ial: PUR, green al Ethernet, M8 male connector, straight to ector, straight, cable length: 2 m, jacket een al Ethernet, M12 male connector, D-coded, ale connector, straight, cable length: 2 m, UR, green extension cable, M8 male connector, straight, , M8 male connector, straight, 4-pin, with cable length 2 m, cable jacket TPU, teal, other extension cable, M8 male connector, straight, , RJ45 male connector, straight, 8-pin, ength 2 m, cable jacket TPU, teal, other cable
Technical data
</styleobject> (16)
| LED Color |
Status |
| LED 0 ... 7 green |
On |
| Red |
Flashing OFF |
| LED 7 white |
Flashing |
| Process Data Mapping of the Single |
Protocols |
| Details on the respective protocols can be found Modbus TCP Register Addressierung (16-bit) |
see manual. |
| Process output data (scanner -> |
station): |
| Offset Prozessausgangsdaten: 0x0800: Struktur |
station): |
| Red |
ON Flashing OFF |
| Process Data Mapping of the Single |
Bit Bit Bit Bit Bit Bit |
| For more details on the corresponding protocols Modbus TCP Register addressing (16-bit) |
see manual. |
| 0x0000 or 0x8000: Structure according to Offset process output data: |
general register mapping |
| 0x0800 or 0x9000: Structure according to |
alternately flashing |
| Status word is located in front of the general |
process data! |
| Process Data Mapping of the Single |
Bit Bit Bit Bit Bit Bit |
| For more details on the corresponding protocols Modbus TCP Register addressing (16-bit) |
see manual. |
Module Status LED (12)
| LED Color |
Status |
| ETH1/ETH2 Green |
On Flashing |
| Yellow |
On Flashing Off |
| BUS Green |
On Flashing |
| Red |
On Flashing |
| Red/ Green |
Alternating Off |
| ERR Green |
On |
| Red |
On |
| LED response |
master in the Beep network: |
| Green |
1 Hz, 250 ms off |
| Green/red |
1 Hz, 250 ms red |
| Green/red |
1 Hz, alternating |
PROFINET (11)
| Version |
2.35 |
| Addressing |
DCP |
| Conformance class |
B (RT) |
| MinCycleTime |
1 ms |
| Fast Start-Up (FSU) |
< 500 ms |
| Diagnostics |
acc. to PROFINET alarm handling |
| Topology detection |
supported |
| Automatic addressing |
supported |
| Media Redundancy Protocol (MRP) |
supported |
| System redundancy |
S2 |
| Netload class |
3 |
Digital inputs (11)
| Number of channels |
8 |
| Connectivity inputs |
M8, 3-pin |
| Input type |
PNP |
| Type of input diagnostics |
Group diagnostics |
| Switching threshold |
EN 61131-2 type 3, PNP |
| Low-level signal voltage |
< 5 V |
| High level signal voltage |
> 11 V |
| Low level signal current |
< 1.5 mA |
| High level signal current |
> 2 mA |
| Input delay |
0.2 ms/3 ms |
| Electrical isolation |
Galvanic isolation from the fieldbus Voltage proof up to 500 VDC |
EtherNet/IP (9)
| Addressing |
acc. to EtherNet/IP specification |
| Quick Connect (QC) |
< 500 ms |
| Min. RPI |
2 ms |
| Device Level Ring (DLR) |
supported |
| Class 3 connections (TCP) |
3 |
| Class 1 connections (CIP) |
10 |
| Input Assembly Instance |
103 |
| Output Assembly Instance |
104 |
| Configuration Assembly Instance |
106 |
Legend: (9)
| V2 Undervoltage |
V2 FCE |
| Cx Port x |
Px |
| DIx Digital input |
channel x DOx |
| Diag Module |
Diagnostics Available ERR x |
| VERRV2Cxy Overcurrent |
supply VAUX1 |
| VERRVxCHyz Überstrom |
supply VAUXx PWMOUTERR |
| channel y |
to z |
| VERRVxPyCz Überstrom |
supply VAUXx VAUXxPyCz |
| Pin y slot |
z CNT_RST |
Process input data (station -> scanner): (8)
| 0x0800 or 0x9000: Structure according to |
alternately flashing |
| Process output data (scanner -> |
station): |
| Control word is located in front of the general |
station): |
| Reg/ Bit Bit Bit |
Bit Bit Bit Bit Bit Bit |
| Word 15 14 13 |
12 11 10 9 8 7 |
| 0x0001 Structure according … |
- - - - DI7 DI6 |
| slot - - - - |
- - - - C7 C6 |
| Pin |
P4 P4 |
Power supply (7)
| Supply voltage |
24 VDC |
| Admissible range |
18…30 VDC Gesamtstrom max. 4A per voltage group V1 |
| Voltage supply connection |
2 x M8, 4-pin, A-coded |
| Operating current |
V1: max. 150 mA |
| Sensor/actuator supply |
supply slots C0-C7 aus V1 short-circuit proof, 0,5A per Gruppe C0- C3, C4-C7 |
| Electrical isolation |
Galvanic isolation of V1 and V2 voltage group Voltage proof up to 500 VDC |
| Fault exclusion |
Yes, acc. to EN ISO 13849-2, appendix D.2 |
System data (7)
| Fieldbus transmission rate |
10/100 Mbps |
| Fieldbus connection technology |
2 x M8, 4-pin |
| Protocol detection |
automatic |
| Web server |
Default: 192.168.1.254 |
| Service interface |
Ethernet via P1 or P2 |
| BEEP functionality |
supported |
| ARGEE functionality |
supported |
Ambient conditions (7)
| Ambient temperature |
-40...+70 °C |
| Storage temperature |
-40…+85 °C |
| Altitude |
max. 5000 m |
| Electromagnetic compatibility |
Acc. to EN 61131-2 |
| Shock test |
acc. to DIN EN 60068-2-27 |
| Vibration test |
Acc. to EN 60068-2-6, acceleration up to 20 g |
| Protection class |
IP65 IP67 IP69K |
Byte addressing (8-bit) (7)
| Process Data Mapping of the Single |
Bit Bit Bit Bit Bit Bit |
| For more details on the corresponding protocols Modbus TCP Register addressing (16-bit) |
see manual. |
| Channel - - - - |
Bit Bit Bit Bit Bit Bit |
| - - - - |
- - - - DI7 DI6 |
| Port - - - - Pin |
- - - - C3P2 C3P4 |
| Digitale 0x00000x0000- - - Inputs |
MEXT |
| Diagnostics 0x00010x0002- - - |
- - - - - - |
Process Output Data: (7)
| Process Data Mapping of the Single |
Bit Bit Bit Bit Bit Bit |
| For more details on the corresponding protocols Modbus TCP Register addressing (16-bit) |
see manual. |
| Channel - - - - |
Bit Bit Bit Bit Bit Bit |
| - - - - |
- - - - DI7 DI6 |
| Port - - - - Pin |
- - - - C3P2 C3P4 |
| Latch 0x00000x0000- - - Reset |
MEXT |
| Control0x00010x0002- - - |
- - - - - - |
CC-Link (6)
| Interface |
CC-Link IE Field Basic |
| Type |
Intelligent device station |
| Message Transmission |
yes |
| Number of occupied stations |
1 |
| IP change mechanism |
yes |
| Acyclic SLMP communication |
yes |
Mechanical data (6)
| Dimensions |
144 mm x 32 mm x 32 mm |
| Housing material |
PA6-GF30 |
| Housing color |
Black |
| Material label |
Polycarbonate |
| Male connector material |
Nickel-plated brass |
| Mounting |
2 fixing holes, Ø 4.6 mm |
Modbus TCP (5)
| Addressing |
Static IP, DHCP |
| Supported function codes |
FC3, FC4, FC6, FC16, FC23 |
| Number of TCP connections |
8 |
| Input register start address |
0 (0x0000 hex) |
| Output register start address |
2048 (0x0800 hex) |
Tests/approvals (4)
| Approvals and certificates |
CE UKCA ATEX zone 2/22 CCC-Ex FCC statement, UV resistant acc. to DIN EN ISO 4892-2A (2013) |
| UL Certificate |
cULus LISTED 21 W2, encl. Type 1 IND.CONT.EQ. |
| Note on ATEX/IECEx |
The Quick Start Guide with information on use in Ex areas must be observed. |
| MTTF |
319 years acc. to SN 29500 (Ed. 99) 20 °C |
0x00040x0008Counter value MSB (3)
| Frequency 0x00050x000AFrequency MSB Ch0 |
Frequency |
| Status 0x00060x000C- - - |
- - - - - reserved |
| modules 0x00070x000E- FCE - Status |
V2C67 |
Field logic controller (FLC) (2)
| ARGEE Firmware Version |
3.1.4.0 |
| ARGEE Engineering Version |
2.0.24.0 |
Inputs/Outputs (1)
Standards/directives (1)
| Drop and topple |
Acc. to IEC 60068-2-31/IEC 60068-2-32 |
Other properties (1)
Comments (1)
Red (1)
Delivery time and availability
For urgent orders please ask us for the exact delivery time in advance; on request we check express shipping.
Your Benefits With Us
- Worldwide shipping of all Turck fieldbus and interface products
- Large stock levels for many products – current lead time available on request
- Terminal blocks, terminating resistors, gateways and connection cables available on request
- Fast shipping via UPS (parcel) or freight forwarder (pallets), express delivery available on request
- Extensive hands-on application know-how
- Personal advice on selecting the right component
- Resellers receive volume-based discounts on request
- Large companies, public authorities and government agencies can order on account (request via our contact form)
