UF200.D50-UAMJ.72N Ultrasonic distance measuring sensors (11708323)

UF200.D50-UAMJ.72N Ultrasonic distance measuring sensors (11708323)

SKU: BAU.11708323

HAN: 11708323

Category: Ultrasonic sensors for front mount

Low stock level

250,11 CHF

incl. 19% VAT ,

Manufacturers:

Baumer

Ultrasonic distance measuring sensors

Best measuring performance due to precise measuring principle
Parallel output signal to the IO-Link channel through Dual Channel
Flexible parameterization and additional diagnostic data thanks to IO-Link
Shortest blind zone in its class
High performance in compact housing
Metal connector

no description available

Technical data

General data
Scanning range Sd	15 … 500 mm
Scanning range close limit Sdc	15 … 500 mm
Scanning range far limit Sde	15 … 500 mm
Version	IO-Link dual channel
Hysteresis typ.	4 % Sde
Repeat accuracy	0.5 mm
Resolution	< 0.3 mm
Response time ton/toff standard	< 40 ms
Response time ton/toff min	< 16 ms
Temperature drift	< 2 % of distance to target Sde
Power-up drift	Compensated after 15 min.
Sonic frequency	290 kHz
Adjustment	qTeach, line-Teach, IO-Link
Light indicator	LED yellow
Power on indication	LED green
Alignment measuring axis	< 2°
Electrical data
Voltage supply range +Vs	12 … 30 VDC
Current consumption typ.	12 mA
Output circuit	Voltage output
Baud rate	38.4 kBaud (COM 2)
Output signal	0 ... 10 V / 10 ... 0 V
Load resistance	> 10 kOhm
Residual ripple	< 10 % Vs
Short circuit protection	Yes
Reverse polarity protection	Yes, Vs to GND
Communication interface
Interface	IO-Link V1.1
Baud rate	38.4 kBaud (COM 2)
Cycle time	≥ 8 ms
Process data length	48 Bit
Process data structure	Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 2 = quality Bit 3 = alarm Bit 5 = SSC4 (counter) Bit 8-15 = scale factor Bit 16-47 = 32 Bit measurement
IO-Link port type	Class A
Additional data	Distance Excess gain Operating cycles Operating hours Boot cycles Operating voltage Device temperature Histograms
Adjustable parameters	Switching point Switching hysteresis Measured value filtering Time filters LED status indicators Output logic Output circuit Counter Beam forming Analog output characteristic Deactivate the sensor element Find Me function
Mechanical data
Design	Rectangular
Housing material	Plastic (ASA, PMMA)
Width / diameter	20.5 mm
Height / length	41 mm
Depth	15 mm
Connection types	Connector M8 4 pin
Ambient conditions
Operating temperature	-25 … +65 °C
Storage temperature	-25 … +75 °C
Protection class	IP 67

Item information	Value
Ausführung:	IO-Link dual channel
Repeatability:	0.5 mm
Resolution:	< 0.3 mm
Power on indication:	LED green
Light indicator:	LED yellow
Temperature drift:	< 2 % of distance to target Sde
Adjustment:	qTeach, line-Teach, IO-Link
Scanning range Sd:	15 … 500 mm
Scanning range close limit Sdc:	15 … 500 mm
Scanning range far limit Sde:	15 … 500 mm
Hysteresis typ.:	4 % Sde
Power-up drift:	Compensated after 15 min.
Response time ton/toff min:	< 16 ms
Response time ton/toff standard:	< 40 ms
Sonic frequency:	290 kHz
Alignment measuring axis:	< 2°