clemco Automatic Abrasive Manual Blasting Gun , 11,0 mm ceramic

clemco Automatic Abrasive Manual Blasting Gun , 11,0 mm ceramic

SKU: 6206-8

HAN: 6206-8

Category: Blast guns

Available
Delivery time: 1 - 5 Workdays Other countries

169,01 €

incl. 19% VAT , plus

Nozzle type
Nozzle size

CLEMCO
Automatic Suction Blast Gun

Description

High-production, mounted or hand-held blast cleaning gun for use in any suction blast cabinet.
May be mounted in fixed position.
Made from cast steel.
Gun assembly includes gun body, nozzle, orifice with locknut, O-ring and nozzle holding nut.

Purpose

The automatic and BNP gun directs a high-speed mix-ture of air and abrasive to quickly remove corrosion, mill scale, coatings, heat treatment residue, carbon buildup, tool marks, and burrs. The blast stream from a BNP gun can produce a uniform texture or create an etched finish to increase bonding strength for coatings.
High-performance blast gun provides comfortable grip for operator and allows precise control of blast pattern. The automatic gun keeps the air jet and blast nozzle precisely aligned to maximize blast efficiency and minimize gun-body wear
A knurled nut at gun outlet allows operator to change nozzles without tools. Gun accepts a variety of nozzles and extensions so operator can select the best nozzle size and nozzle composition for the application.
Works with most recyclable blast media glass bead, ceramics, aluminum oxide and some sizes of steel grit and shot. Select appropriate blast media for your application.

Advantages

Fixed mounted design reduces operator fatigue and increases productivity during prolonged blasting
Precisely shaped mixing chamber eliminates slugging and uneven media flow common to inexpensive guns.
Ceramic nozzle works with most non abrasive blast media (glass beads, nut shells, crushed glass, ...)
Tungsten carbide nozzles last longer than ceramic nozzles in most applications.
Boron carbide nozzles easily handle aggressive abrasives.
Automatic gun accepts assorted air jet and nozzle sizes to take advantage of the available air supply
Automatic gun accepts extension nozzles and angled tip nozzles for special application.

All options of the Automatic Gun System

Requirements
for Operation

Clean, dry compressed air of sufficient volume to maintain pressure at the blast nozzle.
Volume required will depend on air jet selected (See table)
Blast media - abrasive, stripping or peening media suitable for the application.

Description of
Operation

The air jet at the back of the nozzle directs a high-speed stream of compressed air through the mixing chamber and out the nozzle.
The rapid passage of this air generates negative pressure, causing blast media to flow into the mixing chamber and out the nozzle.
This technology is widely known as venturi or suction blasting.
The operator holds the Automatic gun at a predetermined distance and angle, relative to the surface being blasted.
The Automatic gun can clean, finish or peen the part being blasted. By moving the gun and the part the operator quickly covers as much of the surface as needs blasting.
A bolt at the top, left or right side allows the operator to attach the Automatic gun to a fixed bracket (not included).
The part can then be moved under the nozzle for blasting freeing the operator's hands to manipulate the part.
When the part is sufficiently processed, the operator releases the pedal to stop blasting

Air consumption

Ø Nozzle[mm]	Consumption [m³ /min.]
Ø Nozzle[mm]	3 bar	4 bar	5 bar	6 bar
6,5	0,38	0,46	0,54	0,62
8,0	0,70	0,78	0,86	0,94
10,0	0,95	1,13	1,23	1,51
12,0	1,26	1,51	1,63	1,75

Shipping and conditions of sales

Product as described
For deliveries to non-EU countries, please contact us and send your delivery address for exact shipping quotes. Before bidding you must have a positive feedback and a confirmed address from us.
A VAT invoice is included in every sale (EU). For intra-Community supplies or export, you will receive an invoice without VAT.

Service and quality

The offered goods are all high-grade and new.
We are an authorized Clemco dealer with twenty years of experience in blasting and abrasive techniques.
For supplying our customers with the correct spares as quickly as possible we hold a very large warehouse stock with spares.
If necessary we provide on-site fitting of the system (in Germany).
For optimal performance of the system we can provide maintenance services or we can teach you how to perform maintenance work independently.
If you need further information do not hesitate to contact us.

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Clemco international GmbH, Carl-Zeiss-Str. 21, 83052 Bruckmühl, Bayern, Deutschland, info@clemco-international.com, https://www.clemco-international.com

In stock

Clemco

Spare part Automatic gun: 10. Nut

8,14 € *

In stock

Clemco

Spare part BNP Blasting guns: 2. Nut

8,14 € *

In stock

Clemco

Spare part BNP Blasting guns: 6. Nut

4,18 € *

In stock

Clemco

Spare part Automatic gun: 1. Union

6,33 € *

In stock

Clemco

Spare part Automatic gun: 4. Fitting 3/8“

5,43 € *

In stock

Clemco

Spare part Automatic gun: 5. O-ring

0,68 € *

Manufacturer according to GPSR
Clemco international GmbH, Carl-Zeiss-Str.21, 83052 Bruckmühl, Bayern, Deutschland, info@clemco-international.com, https://www.clemco-international.com