Burkert Type 0131 - Direct-acting 2/2-way or 3/2-way toggle valve (290658)

SKU: BUR.290658

HAN: 290658

Category: Type 0131 - Direct-acting 2/2-way or 3/2-way toggle valve

Low stock level

4.117,05

incl. 19% VAT ,

Manufacturers:

Bürkert

The 0131 valve is a direct-acting toggle valve. A variety of seal material combinations are available depending on the application. Thanks to the diaphragm separation between actuator and fluid housing, aggressive media such as acids and alkaline solutions can also be safely controlled. The assortment is rounded out with plastic housings made of PVC. The solenoids are moulded with a highly resistant chemical epoxy. “Kick and drop” electronics are moulded into all DC solenoid variants for reduced electrical power consumption. An optional electrical position feedback sensor reliably detects the switching position. Conformity with KTW and W270 are available for drinking water applications. Furthermore, versions of type 0131 are available that conform with DIN EN 45545:2016 (standard parts 2 and 5) – fire protection in railway vehicles.

Direct-acting media-separated valve up to DN 20
Vibration-proof, block screwed solenoid system
Energy-saving power reduction for all DC variants
Increased safety due to electrical position feedback (optional)
Robust, service-friendly manual override

Item information	Value
Features:	2/2 - B - normally open - inlet port 1 (P/NO)
Valve size:	15,00 mm (9/16 inch)
Nominal voltage:	120,00 V - 120,00 V
Temperature range:	-10,00 °C - 50,00 °C
Fluidics body material:	PVC (Polyvinyl chloride)
Seat seal material:	FKM (Fluor rubber)
Nominal Pressure:	0,00 bar - 1,00 bar
Line connection 1:	Inner thread - NPT3/4
Scope of delivery:	Valve complete
Fluidic port connection number:	2
Valve function number of switching positions:	2
Valve function:	B - normally open - inlet port 1 (P/NO)
Manual actuation:	Yes
Manual actuation type:	Key button
Port connection 1 type:	Inner thread
Manual actuation material:	PA (Polyamide)
Port connection 1 thread marking:	3/4
Manual actuation stop:	Yes
Port connection 1 thread type:	NPT
Port connection 2 type:	Inner thread
Port connection 2 thread type:	NPT
Port connection 2 thread marking:	3/4
Type:	0131
Voltage min / rated voltage:	120 V
Voltage max / rated voltage:	120 V
Voltage frequency:	50/60 Hz
Voltage tolerance positive:	10 %
Voltage tolerance negative:	10 %
AC voltage:	Yes
DC voltage:	Yes
Battery voltage:	Yes
Main valve wetted material:	PVC (Polyvinyl chloride)
Back-pressure-resistant version:	No
Nominal pressure min:	0 bar
Nominal pressure max (liquid):	1 bar
Temperature medium min:	-10 °C
Temperature medium max:	50 °C
Temperature environment min:	-10 °C
Temperature environment max:	50 °C
Seat seal material category:	Elastomer
Seat seal material:	FKM (Fluor rubber)
Sealing toward outside material:	FKM (Fluor rubber)
Rated power consumption:	145 W
Kv value (water):	4,5 m3/h
QNn value (gas):	4.800 l/min
Main valve orifice 1 (P) (mm):	15 mm
Main valve orifice 1 (inch):	9/16 inch
Actuator type:	Plunger valve
Operation:	direct-acting
Media separation:	Yes
Main valve operating principle:	Globe valve
Valve construction:	Valve complete
Switch function:	on/off
Switch time open min:	10 ms
Switch time open max.:	20 ms
Switch time close min:	40 ms
Switch time close max.:	60 ms
Nominal operation/Duty cycle:	100 %
Vacuum version:	Yes
Analysis version:	No
Valve setting opening time:	No
Valve setting closing time:	No
Oil burner valve:	No
Steam version:	No
Main valve with integrated screen:	No
Electrical connection sort:	Plug pattern form A according to DIN EN 175301-803
Electrical connection number of contacts:	2 + Grounding conductor
Cable plug in delivery:	enclosed
Electrical connection position:	via inlet
Cable plug art. no. - type:	00314802 - 2518
Protection type (IP max. with suitable connector):	IP65
Low-noise version:	Energy saving technology included
Coil type:	No
Coil insulation material (encasement):	block bolted
Coil size:	Epoxy
Coil wiring overvoltage protection:	49 mm
Coil wiring rectifier:	Suppressor diode
Coil wiring polarity recovery diode:	Yes
Thermal insulation class of the actuator:	Yes
inrush power consumption AC:	10 W
Rated power AC:	145 V·A
Rated power DC:	H
Reduced power DC:	145 W
Manual actuation screw slot:	No

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de