Burkert Type 5404 - Servo-assisted 2/2-way piston valve (20003705)

SKU: BUR.20003705

HAN: 20003705

Category: Type 5404 - Servo-assisted 2/2-way piston valve

Low stock level

215,27 €

incl. 19% VAT ,

Manufacturers:

Bürkert

The 5404 valve is a servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are moulded with high-quality epoxy resin. To reduce power consumption in operation, coils with "Kick and Drop" (KD) electronics assembly (double coil technology) are available. In combination with a plug to DIN EN 175301-803 Form A, the valves satisfy degree of protection IP65. The cable plug is not included and must be ordered separately.

Servo-assisted piston valve with an orifice up to DN50
Explosion proof versions for Cat. 2
Suitable for gas and steam applications up to 180°C
Relief valves for compressors
Energy-saving double coil technology with kick and drop variant

Item information	Value
Seat seal material:	FKM (Fluor rubber)
Line connection 1:	Inner thread-1/2-G-
Voltage max / rated voltage:	24 V
Nominal pressure min:	1 bar
Operation:	servo-controlled
Valve function:	B - normally open - inlet port 1 (P/NO)
Nominal pressure max (liquid):	30 bar
Temperature medium:	-10 °C-100 °C-
Fluidic port connection number:	2
Valve function number of switching positions:	2
Valve function:	B - normally open - inlet port 1 (P/NO)
Manual actuation:	No
Port connection 1 type:	Inner thread
Port connection 1 thread marking:	1/2
Port connection 1 thread type:	G
Port connection 2 type:	Inner thread
Port connection 2 thread type:	G
Port connection 2 thread marking:	1/2
Type:	5404
Voltage min / rated voltage:	24 V
Voltage max / rated voltage:	24 V
Voltage tolerance positive:	10 %
Voltage tolerance negative:	10 %
AC voltage:	No
DC voltage:	Yes
Battery voltage:	No
Valve seat material:	Brass
Main valve wetted material:	Brass
Back-pressure-resistant version:	No
Nominal pressure min:	1 bar
Nominal pressure max (liquid):	30 bar
Temperature medium min:	-10 °C
Temperature medium max:	100 °C
Temperature environment min:	-10 °C
Temperature environment max:	55 °C
Seat seal material category:	Elastomer
Seat seal material:	FKM (Fluor rubber)
Sealing toward outside material:	FKM (Fluor rubber)
Rated power consumption:	8 W
Kv value (water):	2 m3/h
QNn value (gas):	2.200 l/min
Pilot control seal material:	FKM (Fluor rubber)
Main valve orifice 1 (P) (mm):	12 mm
Main valve orifice 1 (inch):	7/16 inch
Actuator type:	Plunger valve
Operation:	servo-controlled
Media separation:	No
Flow:	Above seat
Main valve operating principle:	Globe valve
Valve construction:	Valve complete
Switch function:	on/off
Switch time open min:	20 ms
Switch time open max.:	40 ms
Switch time close min:	100 ms
Switch time close max.:	250 ms
Nominal operation/Duty cycle:	100 %
Vacuum version:	No
Analysis version:	No
Oxygen version:	No
Valve setting opening time:	No
Valve setting closing time:	No
Oil burner valve:	No
Steam version:	No
Core guide:	Sliding ring
Installation length:	65 mm
Main valve with integrated screen:	No
Electrical connection sort:	Plug pattern form A according to DIN EN 175301-803
Electrical connection number of contacts:	2 + Grounding conductor
Cable plug in delivery:	not included
Electrical connection position:	in direction of flow left
Protection type (IP max. with suitable connector):	IP65
Sliding ring material:	Energy saving technology possible
Low-noise version:	PTFE (Polytetrafluorethylene)
Coil type:	No
Coil insulation material (encasement):	placed on top
Coil size:	Epoxy
Coil wiring overvoltage protection:	32 mm
Coil wiring rectifier:	without
Coil wiring polarity recovery diode:	No
Thermal insulation class of the actuator:	for high temperatures
Coil special feature:	No
Medium-contacting part core material:	9 W
Medium-contacting part stopper material:	Stainless steel
Rated power DC:	H
Reduced power DC:	9 W

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de