Burkert Type 6012 - Plunger valve 3/2 way direct-acting (552298)

SKU: BUR.552298

HAN: 552298

Category: Type 6012 - Plunger valve 3/2 way direct-acting

Low stock level

86,54 €

incl. 19% VAT , plus

Manufacturers:

Bürkert

Valve 6012 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. A banjo connection with banjo bolt is the ideal solution for easy direct mounting on a pneumatic drive. Optional manual actuation enables quick commissioning and optimal maintenance. In combination with a cable plug in accordance with industry standard Form B or DIN EN 17301-803 Form C, the valves satisfy protection class IP65.

Direct-acting, compact small-format valve with diameter of up to DN 1.6
Screwed coil system
Banjo threaded connection for direct mounting on pneumatic valves
Simple and quick push-in, flange, or manifold installation
Service-friendly manual override

Item information	Value
Seat seal material:	FKM (Fluor rubber)
Line connection 1:	Banjo-1/4-G
Voltage max / rated voltage:	230 V
Nominal pressure min:	0 bar
Operation:	direct-acting
Valve function:	C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO)
Nominal pressure max (liquid):	10 bar
Nominal pressure max (gas):	10 bar
Temperature medium:	-10 °C-60 °C
Fluidic port connection number:	3
Valve function number of switching positions:	2
Valve function:	C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conectedwith exhaust port 3 (R/NO)
Manual actuation:	Yes
Manual actuation type:	Rotary level
Port connection 1 type:	Banjo
Manual actuation material:	PA (Polyamide)
Port connection 1 thread marking:	1/4
Manual actuation stop:	No
Port connection 1 thread type:	G
Port connection 2 type:	Banjo
Port connection 2 thread type:	G
Port connection 2 thread marking:	1/8
Type:	6012
Voltage min / rated voltage:	230 V
Voltage max / rated voltage:	230 V
Voltage frequency:	50 Hz
Voltage tolerance positive:	10 %
Voltage tolerance negative:	10 %
AC voltage:	Yes
DC voltage:	No
Battery voltage:	No
Main valve wetted material:	PA (Polyamide)
Back-pressure-resistant version:	No
Nominal pressure min:	0 bar
Nominal pressure max (gas):	10 bar
Nominal pressure max (liquid):	10 bar
Temperature medium min:	-10 °C
Temperature medium max:	60 °C
Temperature environment min:	-10 °C
Temperature environment max:	40 °C
Seat seal material category:	Elastomer
Seat seal material:	FKM (Fluor rubber)
Sealing toward outside material:	NBR (Nitrile rubber)
Rated power consumption:	4 W
Kv value (water):	0,045 m3/h
QNn value (gas):	48 l/min
Main valve orifice 1 (P) (mm):	1,2 mm
Main valve orifice 1 (inch):	3/64 inch
Actuator type:	Plunger valve
Operation:	direct-acting
Media separation:	No
Flow:	Below seat
Main valve operating principle:	Globe valve
Valve construction:	Valve complete
Switch function:	on/off
Switch time open min:	7 ms
Switch time open max.:	10 ms
Switch time close min:	9 ms
Switch time close max.:	12 ms
Nominal operation/Duty cycle:	100 %
Vacuum version:	No
Analysis version:	No
Valve setting opening time:	No
Valve setting closing time:	No
Oil burner valve:	No
Steam version:	No
Main valve with integrated screen:	No
Electrical connection sort:	Plug pattern form B according to industrial standard
Electrical connection number of contacts:	2 + Grounding conductor
Cable plug in delivery:	not included
Electrical connection position:	in direction of flow left
Low-noise version:	No
Coil type:	placed on top
Coil insulation material (encasement):	Epoxy
Coil size:	20 mm
Coil wiring overvoltage protection:	without
Protection type IP (max. with suitable connector):	IP65
Coil wiring rectifier:	No
Coil wiring polarity recovery diode:	No
Thermal insulation class of the actuator:	H
Coil special feature:	for high temperatures
inrush power consumption AC:	9 V·A
Rated power AC:	6 V·A
Port connection 3 type:	Inner thread
Port connection 3 thread type:	M
Port connection 3 thread marking:	5
Manual actuation screw slot:	Yes

There are no reviews yet.

Contact data

First name - optional

Last name - optional

Company - optional

E-Mail

Phone - optional

Question about item

Your question

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße 13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de

Product safety information

Manufacturer information:

Christian Bürkert GmbH & Co. KG
Christian-Bürkert-Straße 13-17
Baden-Württemberg
Ingelfingen, Deutschland, 74653
[email protected]
https://www.buerkert.de

Manufacturer according to GPSR
Christian Bürkert GmbH & Co. KG, Christian-Bürkert-Straße13-17, 74653 Ingelfingen, Baden-Württemberg, Deutschland, [email protected], https://www.buerkert.de